|
|
| SMS Server Tools 3 Community |
| Welcome, Guest. The forum is currently read-only, but will open soon. |
Tue Jul 01, 2025 01:50 |
Page: 1
| Keywords: Mode: All keywords (AND) |
|
Sat Mar 17, 2012 11:04
|
Foley10: Debian Squueze:
Version of smsd: Latest Stable
Smsd installed from: smstools-webiste
ZTE MFE 100
ttyUSB02
Hi guys i tryed to reveice an sms with my modem but just get this error:
2012-03-17 12:00:39,7, GSM1: <- +CMS ERROR: 321 (Invalid memory index)
2012-03-17 12:00:39,6, GSM1: No SMS received (reading interrupted)
2012-03-17 12:00:49,6, GSM1: Checking device for incoming SMS
2012-03-17 12:00:49,6, GSM1: Checking if modem is ready
? :(
|
|
Sun Jan 29, 2012 18:53
|
Foley10: Ubuntu 10.04:
Newest Recoomend version ...:
ZTE MFE 100:
ttyUSB2:
Hi all my SMS Server works but cant get SMS i still get this error :(
No SMS received (reading interrupted)
|
|
Fri Jan 06, 2012 14:07
|
Foley10: Hey Guys now my Surfstick works right ( i thought couse with umtsmon i can send sms)
I have an Ubuntu 10.04 and an ZTE MFE 100 Surfstick (E-Plus) with the newest version of smstools.
I tried to send an sms via sendsms but still get an error.
What i entered in console :
sendsms
49151.....
Text: Test123
My Configuration looks like this
devices = GSM1
logfile = /var/log/smsd.log
loglevel = 7
[GSM1]
device = /dev/ttyUSB2
incoming = no
pin = 3063
What should work cause my dmesg bring me that the Modem is on /dev/ttyUSB2
[ 30.136246] USB Serial support registered for GSM modem (1-port)
[ 30.142049] option 1-2:1.0: GSM modem (1-port) converter detected
[ 30.187328] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 30.187545] option 1-2:1.1: GSM modem (1-port) converter detected
[ 30.228181] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 30.228480] option 1-2:1.3: GSM modem (1-port) converter detected
[ 30.237468] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 30.253250] usbcore: registered new interface driver option
[ 30.253272] option: v0.7.2:USB Driver for GSM modems
And now i still get this error.Can anybody help me ???
2012-01-06 14:57:24,5, GSM1: Waiting for messages to send...
2012-01-06 14:58:10,5, smsd: Moved file /var/spool/sms/outgoing/send_EHL1rW to /var/spool/sms/checked
2012-01-06 14:58:12,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/send_EHL1rW
2012-01-06 14:58:12,6, GSM1: Sending SMS from to 4915259584404
2012-01-06 14:58:12,6, GSM1: Checking if modem is ready
2012-01-06 14:58:12,7, GSM1: -> AT
2012-01-06 14:58:12,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:12,7, GSM1: <- OK
2012-01-06 14:58:12,6, GSM1: Pre-initializing modem
2012-01-06 14:58:12,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2012-01-06 14:58:12,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:22,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 1.
2012-01-06 14:58:22,7, GSM1: <-
2012-01-06 14:58:22,3, GSM1: Modem did not accept the pre-init string
2012-01-06 14:58:22,6, GSM1: Checking if modem needs PIN
2012-01-06 14:58:22,7, GSM1: -> AT+CPIN?
2012-01-06 14:58:22,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:23,7, GSM1: <- +CPIN: READY OK
2012-01-06 14:58:23,7, GSM1: -> AT+CSQ
2012-01-06 14:58:23,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:23,7, GSM1: <- +CSQ: 16,99 OK
2012-01-06 14:58:23,6, GSM1: Signal Strength Indicator: (16,99) -81 dBm (Good), Bit Error Rate: not known or not detectable
2012-01-06 14:58:23,6, GSM1: Checking if Modem is registered to the network
2012-01-06 14:58:23,7, GSM1: -> AT+CREG?
2012-01-06 14:58:23,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:24,7, GSM1: <- +CREG: 2,1, 238, 60C OK
2012-01-06 14:58:24,6, GSM1: Modem is registered to the network
2012-01-06 14:58:24,6, GSM1: Selecting PDU mode
2012-01-06 14:58:24,7, GSM1: -> AT+CMGF=0
2012-01-06 14:58:24,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:24,7, GSM1: <- OK
2012-01-06 14:58:24,7, GSM1: -> AT+CMGS=27
2012-01-06 14:58:24,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:25,7, GSM1: <- >
2012-01-06 14:58:25,7, GSM1: -> 0011000D91945152594804F40000FF0DC8309BFD0631CB6E77584E06.
2012-01-06 14:58:25,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:25,7, GSM1: <- +CMS ERROR: 330 (SMSC address unknown)
2012-01-06 14:58:25,3, GSM1: The modem answer was not OK: +CMS ERROR: 330 (SMSC address unknown)
2012-01-06 14:58:25,5, GSM1: Waiting 10 sec. before retrying
2012-01-06 14:58:35,6, GSM1: Checking if modem is ready
2012-01-06 14:58:35,7, GSM1: -> AT
2012-01-06 14:58:35,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:36,7, GSM1: <- OK
2012-01-06 14:58:36,6, GSM1: Pre-initializing modem
2012-01-06 14:58:36,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2012-01-06 14:58:36,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:36,7, GSM1: <- OK
2012-01-06 14:58:36,6, GSM1: Checking if modem needs PIN
2012-01-06 14:58:36,7, GSM1: -> AT+CPIN?
2012-01-06 14:58:36,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:37,7, GSM1: <- +CPIN: READY OK
2012-01-06 14:58:37,7, GSM1: -> AT+CSQ
2012-01-06 14:58:37,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:37,7, GSM1: <- +CSQ: 16,99 OK
2012-01-06 14:58:37,6, GSM1: Signal Strength Indicator: (16,99) -81 dBm (Good), Bit Error Rate: not known or not detectable
2012-01-06 14:58:37,6, GSM1: Checking if Modem is registered to the network
2012-01-06 14:58:37,7, GSM1: -> AT+CREG?
2012-01-06 14:58:37,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:38,7, GSM1: <- +CREG: 2,1, 238, 60C OK
2012-01-06 14:58:38,6, GSM1: Modem is registered to the network
2012-01-06 14:58:38,6, GSM1: Selecting PDU mode
2012-01-06 14:58:38,7, GSM1: -> AT+CMGF=0
2012-01-06 14:58:38,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:38,7, GSM1: <- OK
2012-01-06 14:58:38,7, GSM1: -> AT+CMGS=27
2012-01-06 14:58:38,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:39,7, GSM1: <- >
2012-01-06 14:58:39,7, GSM1: -> 0011000D91945152594804F40000FF0DC8309BFD0631CB6E77584E06.
2012-01-06 14:58:39,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:39,7, GSM1: <- +CMS ERROR: 330 (SMSC address unknown)
2012-01-06 14:58:39,3, GSM1: The modem answer was not OK: +CMS ERROR: 330 (SMSC address unknown)
2012-01-06 14:58:39,5, GSM1: Waiting 10 sec. before retrying
2012-01-06 14:58:49,6, GSM1: Checking if modem is ready
2012-01-06 14:58:49,7, GSM1: -> AT
2012-01-06 14:58:49,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:50,7, GSM1: <- OK
2012-01-06 14:58:50,6, GSM1: Pre-initializing modem
2012-01-06 14:58:50,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2012-01-06 14:58:50,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:50,7, GSM1: <- OK
2012-01-06 14:58:50,6, GSM1: Checking if modem needs PIN
2012-01-06 14:58:50,7, GSM1: -> AT+CPIN?
2012-01-06 14:58:50,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:51,7, GSM1: <- +CPIN: READY OK
2012-01-06 14:58:51,7, GSM1: -> AT+CSQ
2012-01-06 14:58:51,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:51,7, GSM1: <- +CSQ: 16,99 OK
2012-01-06 14:58:51,6, GSM1: Signal Strength Indicator: (16,99) -81 dBm (Good), Bit Error Rate: not known or not detectable
2012-01-06 14:58:51,6, GSM1: Checking if Modem is registered to the network
2012-01-06 14:58:51,7, GSM1: -> AT+CREG?
2012-01-06 14:58:51,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:52,7, GSM1: <- +CREG: 2,1, 238, 60C OK
2012-01-06 14:58:52,6, GSM1: Modem is registered to the network
2012-01-06 14:58:52,6, GSM1: Selecting PDU mode
2012-01-06 14:58:52,7, GSM1: -> AT+CMGF=0
2012-01-06 14:58:52,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:52,7, GSM1: <- OK
2012-01-06 14:58:52,7, GSM1: -> AT+CMGS=27
2012-01-06 14:58:52,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:53,7, GSM1: <- >
2012-01-06 14:58:53,7, GSM1: -> 0011000D91945152594804F40000FF0DC8309BFD0631CB6E77584E06.
2012-01-06 14:58:53,7, GSM1: Command is sent, waiting for the answer
2012-01-06 14:58:53,7, GSM1: <- +CMS ERROR: 330 (SMSC address unknown)
2012-01-06 14:58:53,3, GSM1: The modem answer was not OK: +CMS ERROR: 330 (SMSC address unknown)
2012-01-06 14:58:53,4, GSM1: Sending SMS to 4915259584404 failed, trying time 41 sec. Retries: 2.
2012-01-06 14:58:53,6, GSM1: Deleted file /var/spool/sms/checked/send_EHL1rW
|
|
Thu Jan 05, 2012 19:18
|
Foley10: Hey Guy finaly found an solution.
If anybody has the same problem click here :
(Thread is in german)
http://forum.ubuntuusers.de/topic/device-problem/#post-3825592
|
|
Wed Jan 04, 2012 13:37
|
Foley10: Sry am a real Linux noob dont know how to find the Serial Port. ???
|
|
Fri Dec 30, 2011 13:22
|
Foley10: Hei Guy have an Ubuntu 10.04 with SMSTOOLS Server.
I plugged in my Surfstick (ZTE MFE 100) and changed to "Modem" mode like its described here what works fine ...
After that i tried to send an sms (sendsms) .
I setted up the Modem Device /dev/sg2
cause my hwinfo say that :P
45: SCSI 500.1: 10600 Disk
[Created at block.254]
Unique ID: uI_Q.eDlGeyNChiE
Parent ID: f5xu.D4EZuGTknpB
SysFS ID: /class/block/sdb
SysFS BusID: 5:0:0:1
SysFS Device Link: /devices/pci0000:00/0000:00:10.3/usb1/1-1/1-1:1.0/host5/target5:0:0/5:0:0:1
Hardware Class: disk
Model: "ZTE MMC Storage"
Vendor: usb 0x19d2 "ZTE"
Device: usb 0x2000 "MMC Storage"
Revision: "2.31"
Driver: "usb-storage", "sd"
Driver Modules: "usb_storage"
Device File: /dev/sdb (/dev/sg2)
Device Files: /dev/sdb, /dev/disk/by-id/usb-ZTE_MMC_Storage_1234567890ABCDEF-0:1, /dev/disk/by-path/pci-0000:00:10.3-usb-0:1:1.0-scsi-0:0:0:1
Device Number: block 8:16-8:31 (char 21:2)
Geometry (Logical): CHS 1024/0/62
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #19 (USB Controller)
Should work but my SMS Server says no :
2011-12-30 11:06:35,2, smsd: Smsd v3.1.14 started.
2011-12-30 11:06:35,2, smsd: Running as root:root.
2011-12-30 11:06:35,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.e0dbzB /tmp/smsd_data.UsfuVY
2011-12-30 11:06:35,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2011-12-30 11:06:35,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2011-12-30 11:06:35,2, smsd: This is a test run: messages are kept and smsd will stop after reading.
2011-12-30 11:06:35,5, smsd: Outgoing file checker has started. PID: 24258.
2011-12-30 11:06:35,7, smsd: All PID's: 24258,24260
2011-12-30 11:06:35,5, GSM1: Modem handler 0 has started. PID: 24260. Will only send messages.
2011-12-30 11:06:35,3, GSM1: Couldn't open serial port /dev/usbmodem, error: No such file or directory, waiting 30 sec.
2011-12-30 11:07:05,3, GSM1: Cannot open serial port /dev/usbmodem, error: No such file or directory
2011-12-30 11:07:05,2, GSM1: Modem handler 0 terminated. PID: 24260, was started 11-12-30 11:06:35.
2011-12-30 11:07:36,2, smsd: Smsd mainprocess is awaiting the termination of all modem handlers. PID: 24258.
2011-12-30 11:07:36,2, smsd: Smsd mainprocess terminated. PID 24258, was started 11-12-30 11:06:35.
2011-12-30 11:16:42,2, smsd: Smsd v3.1.14 started.
2011-12-30 11:16:42,2, smsd: Running as root:root.
2011-12-30 11:16:42,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.IARDXQ /tmp/smsd_data.Q2jb8v
2011-12-30 11:16:42,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2011-12-30 11:16:42,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2011-12-30 11:16:42,2, smsd: This is a test run: messages are kept and smsd will stop after reading.
2011-12-30 11:16:42,5, smsd: Outgoing file checker has started. PID: 24507.
2011-12-30 11:16:42,7, smsd: All PID's: 24507,24509
2011-12-30 11:16:42,5, GSM1: Modem handler 0 has started. PID: 24509. Will only send messages.
2011-12-30 11:16:42,6, GSM1: Checking if modem is ready
2011-12-30 11:16:42,3, GSM1: Unexpected input: ER^B^?d^A^APM^B^A#MRKSApple_partition_map#3PM^Bt~�Toast 8.0.1 HFS+/Joliet BuilderApple_HFS~�3^ACD001^AAPPLE COMPUTER,2011-12-30 11:16:42,7, GSM1: -> AT
2011-12-30 11:16:42,7, GSM1: Command is sent, waiting for the answer
2011-12-30 11:16:42,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 1.
2011-12-30 11:16:42,7, GSM1: <- ��ƻջG^P�H^P^O^O�^O^P^F ^DÖ»^QInfoPlist.strings^FØ»^DÖ»^LMainMenu.nib^FÙ»^DÒ»^KEnglish.txt^FÚ»^DÒ» German.txt^FÛ»^DÒ»Hungarian.2011-12-30 11:16:42,3, GSM1: Unexpected input: ces �English.lproj^A^B�Ƶb�Ƶb�ƻջһƻջϻ^A^P�^\�^KEnglish.txt^B^B�ƻ`�!Æ»`�!ƻջһƻջG^P"�^P^C^Oï2011-12-30 11:16:42,7, GSM1: -> ^Z�!Æ»`�!Æ»$
2011-12-30 11:16:42,7, GSM1: Command is sent, waiting for the answer
2011-12-30 11:16:42,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 2.
2011-12-30 11:16:42,7, GSM1: <- ��^[�@�U���M^H��u^E�I��E S3�C��t^O�^H�M^T�H^D��� E^\��È�^KV^O�Ä�$�gN@�U^T���U^T���u^L�U^T���u^LéE^X��t��0�p^D�U^TéE^X��t��0�p^D�U^Të
and hangs up (had to kill SMS Deamon).
Then i tryed to define an UDEV Rule for an static device name :
#USB Stick erkennen und umschalten zum Modem
BUS=="usb", KERNEL=="sd?1", SYSFS{idVendor}=="19d2", SYMLINK+="usbmodem", RUN+="usb_modeswitch -v 19d2 -p 2000"
But that doesnt work to.
Can anybody help me :( ???
|
Page: 1
Time in this board is UTC.
|
|
|
 |
|
|
 |
|
