Szpadel: Operating system name and version: Gentoo
Version of smsd: 3.1.15
Smsd installed from: sources
Name and model of a modem / phone: Sierra MC8775
Interface: serial
config:
devices = GSM1
logfile = /var/log/smsd.log
loglevel = 7
[GSM1]
device = /dev/ttyUSB0
incoming = yes
outgoing = yes
smsc = 48XXX
memory_start = 0
verify_pdu = yes
smsc_pdu = yes
2013-02-14 15:53:18,6, GSM1: Sending SMS from to 48XXX
2013-02-14 15:53:18,6, GSM1: Checking if modem is ready
2013-02-14 15:53:18,7, GSM1: -> AT
2013-02-14 15:53:18,7, GSM1: Command is sent, waiting for the answer
2013-02-14 15:53:19,7, GSM1: <- OK
2013-02-14 15:53:19,6, GSM1: Pre-initializing modem
2013-02-14 15:53:19,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2013-02-14 15:53:19,7, GSM1: Command is sent, waiting for the answer
2013-02-14 15:53:19,7, GSM1: <- OK
2013-02-14 15:53:19,6, GSM1: Initializing modem
2013-02-14 15:53:19,7, GSM1: -> AT+CMGL
2013-02-14 15:53:19,7, GSM1: Command is sent, waiting for the answer
2013-02-14 15:53:20,7, GSM1: <- OK
2013-02-14 15:53:20,7, GSM1: -> AT+CSQ
2013-02-14 15:53:20,7, GSM1: Command is sent, waiting for the answer
2013-02-14 15:53:20,7, GSM1: <- +CSQ: 17,99 OK
2013-02-14 15:53:20,6, GSM1: Signal Strength Indicator: (17,99) -79 dBm (Good), Bit Error Rate: not known or not detectable
2013-02-14 15:53:20,6, GSM1: Checking if Modem is registered to the network
2013-02-14 15:53:20,7, GSM1: -> AT+CREG?
2013-02-14 15:53:20,7, GSM1: Command is sent, waiting for the answer
2013-02-14 15:53:21,7, GSM1: <- +CREG: 2,1,A8D4,3DE2 OK
2013-02-14 15:53:21,6, GSM1: Modem is registered to the network
2013-02-14 15:53:21,6, GSM1: Selecting PDU mode
2013-02-14 15:53:21,7, GSM1: -> AT+CMGF=0
2013-02-14 15:53:21,7, GSM1: Command is sent, waiting for the answer
2013-02-14 15:53:21,7, GSM1: <- OK
2013-02-14 15:53:21,7, GSM1: -> ATE1+CMGS=28
2013-02-14 15:53:21,7, GSM1: Command is sent, waiting for the answer
2013-02-14 15:53:22,7, GSM1: <- >
2013-02-14 15:53:22,7, GSM1: -> XXX▒
2013-02-14 15:53:22,7, GSM1: Command is sent, waiting for the answer
2013-02-14 15:53:22,7, GSM1: <- XXX +CMS ERROR: 304 (Invalid PDU mode parameter)
2013-02-14 15:53:22,5, GSM1: Verify PDU: OK
2013-02-14 15:53:22,7, GSM1: -> ATE0
2013-02-14 15:53:22,7, GSM1: Command is sent, waiting for the answer
2013-02-14 15:53:23,7, GSM1: <- ATE0 OK
2013-02-14 15:53:23,3, GSM1: The modem answer was not OK: XXX+CMS ERROR: 304 (Invalid PDU mode parameter)
2013-02-14 15:53:23,5, GSM1: Waiting 10 sec. before retrying
|
