|
|
| SMS Server Tools 3 Community |
| Welcome, Guest. The forum is currently read-only, but will open soon. |
Fri Aug 29, 2025 19:32 |
Page: 1
| Keywords: Mode: All keywords (AND) |
|
Thu May 05, 2011 14:06
|
crub: Helo keke
that was in deed the problem.
an wrong service-center.
i put in the correct one and it worked fine!
thx!
Great tool!
|
|
Thu May 05, 2011 13:02
|
crub: hello ke ke,
thank you very much for the fast answer
i tried 49151.... but unfortunately same result :-(
2011-05-05 14:55:05,5, smsd: Moved file /var/spool/sms/outgoing/send_m10522 to /var/spool/sms/OTHER
2011-05-05 14:55:06,6, GSM1: I have to send 1 short message for /var/spool/sms/OTHER/send_m10522
2011-05-05 14:55:06,6, GSM1: Sending SMS from to 49151xxxxxxxx
2011-05-05 14:55:06,6, GSM1: Checking if modem is ready
2011-05-05 14:55:06,7, GSM1: -> AT
2011-05-05 14:55:06,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:55:06,7, GSM1: <- OK
2011-05-05 14:55:06,6, GSM1: Pre-initializing modem
2011-05-05 14:55:06,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-05 14:55:06,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:55:07,7, GSM1: <- OK
2011-05-05 14:55:07,6, GSM1: Initializing modem
2011-05-05 14:55:07,7, GSM1: -> AT+CPMS="ME"
2011-05-05 14:55:07,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:55:07,7, GSM1: <- +CPMS: 0,195,0,15,0,195 OK
2011-05-05 14:55:08,7, GSM1: -> AT+CSQ
2011-05-05 14:55:08,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:55:08,7, GSM1: <- +CSQ: 27,99 OK
2011-05-05 14:55:08,6, GSM1: Signal Strength Indicator: (27,99) -59 dBm (Excellent), Bit Error Rate: not known or not detectable
2011-05-05 14:55:08,6, GSM1: Checking if Modem is registered to the network
2011-05-05 14:55:08,7, GSM1: -> AT+CREG?
2011-05-05 14:55:08,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:55:08,7, GSM1: <- +CREG: 2,1,"3D44","0000A5C4" OK
2011-05-05 14:55:08,6, GSM1: Modem is registered to the network
2011-05-05 14:55:08,6, GSM1: Selecting PDU mode
2011-05-05 14:55:09,7, GSM1: -> AT+CMGF=0
2011-05-05 14:55:09,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:55:09,7, GSM1: <- OK
2011-05-05 14:55:09,7, GSM1: -> ATE1+CMGS=16
2011-05-05 14:55:09,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:55:09,7, GSM1: <- >
2011-05-05 14:55:10,7, GSM1: -> 00xxxxxxxxxxxxxxxxxxxxxF90000FF0131
2011-05-05 14:55:10,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:55:31,7, GSM1: <- 00xxxxxxxxxxxxxxxxxxxxxF90000FF0131 +CMS ERROR: 500 (Unknown error)
2011-05-05 14:55:31,5, GSM1: Verify PDU: OK
2011-05-05 14:55:31,7, GSM1: -> ATE0
2011-05-05 14:55:31,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:55:31,7, GSM1: <- ATE0 OK
2011-05-05 14:55:31,3, GSM1: The modem answer was not OK: 00xxxxxxxxxxxxxxxxxxxxxF90000FF0131+CMS ERROR: 500 (Unknown error)
2011-05-05 14:55:31,5, GSM1: Waiting 30 sec. before retrying
cs_convert was changed in hope to help - i tired many things, but did never succeed in sending.
now i have set cs_convert to yes again.
my first idea was an incomplete init string - an tried also there several options - without success...
|
|
Thu May 05, 2011 12:18
|
crub: Operating system name and version: SLES 9
Version of smsd: 3.1.14
Smsd installed from: sources
Name and model of a modem / phone: SE W800i
Interface: serial/usb: /dev/ttyACM1
I can receive sms:
2011-05-05 14:07:38,6, GSM1: Checking device for incoming SMS
2011-05-05 14:07:38,6, GSM1: Checking if modem is ready
2011-05-05 14:07:38,7, GSM1: -> AT
2011-05-05 14:07:38,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:07:39,7, GSM1: <- OK
2011-05-05 14:07:39,6, GSM1: Pre-initializing modem
2011-05-05 14:07:39,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-05 14:07:39,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:07:39,7, GSM1: <- OK
2011-05-05 14:07:39,6, GSM1: Initializing modem
2011-05-05 14:07:39,7, GSM1: -> AT+CPMS="ME"
2011-05-05 14:07:39,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:07:40,7, GSM1: <- +CPMS: 0,195,0,15,0,195 OK
2011-05-05 14:07:40,7, GSM1: -> AT+CSQ
2011-05-05 14:07:40,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:07:40,7, GSM1: <- +CSQ: 25,0 OK
2011-05-05 14:07:40,6, GSM1: Signal Strength Indicator: (25,0) -63 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-05 14:07:40,6, GSM1: Checking if Modem is registered to the network
2011-05-05 14:07:40,7, GSM1: -> AT+CREG?
2011-05-05 14:07:40,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:07:41,7, GSM1: <- +CREG: 2,1,"3D44","0000A5C4" OK
2011-05-05 14:07:41,6, GSM1: Modem is registered to the network
2011-05-05 14:07:41,6, GSM1: Selecting PDU mode
2011-05-05 14:07:41,7, GSM1: -> AT+CMGF=0
2011-05-05 14:07:41,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:07:41,7, GSM1: <- OK
2011-05-05 14:07:41,6, GSM1: Checking memory size
2011-05-05 14:07:41,7, GSM1: -> AT+CPMS?
2011-05-05 14:07:41,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:07:42,7, GSM1: <- +CPMS: "ME",1,195,"SM",0,15,"ME",1,195 OK
2011-05-05 14:07:42,6, GSM1: Used memory is 1 of 195
2011-05-05 14:07:42,6, GSM1: Trying to get stored message 1
2011-05-05 14:07:42,7, GSM1: -> AT+CMGR=1
2011-05-05 14:07:42,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:07:42,7, GSM1: <- +CMGR: 0,,24 0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxE OK
2011-05-05 14:07:42,5, GSM1: SMS received, From: 49151xxxxxxxxx
2011-05-05 14:07:42,6, GSM1: Wrote an incoming message file: /var/spool/sms/incoming/GSM1.RDMBGf
2011-05-05 14:07:42,6, GSM1: Deleting message 1
2011-05-05 14:07:42,7, GSM1: -> AT+CMGD=1
2011-05-05 14:07:42,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:07:43,7, GSM1: <- OK
2011-05-05 14:07:43,6, GSM1: Checking device for incoming SMS
2011-05-05 14:07:43,6, GSM1: Checking memory size
2011-05-05 14:07:43,7, GSM1: -> AT+CPMS?
2011-05-05 14:07:43,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:07:43,7, GSM1: <- +CPMS: "ME",0,195,"SM",0,15,"ME",0,195 OK
2011-05-05 14:07:43,6, GSM1: Used memory is 0 of 195
2011-05-05 14:07:43,6, GSM1: No SMS received
but i cant send, maybe because no ctrl-z is sent after the pdu - how can i have sent an ctrl-z after the pdu?
2011-05-05 14:11:53,5, smsd: Moved file /var/spool/sms/outgoing/send_Z23898 to /var/spool/sms/OTHER
2011-05-05 14:11:54,6, GSM1: I have to send 1 short message for /var/spool/sms/OTHER/send_Z23898
2011-05-05 14:11:54,6, GSM1: Sending SMS from to 015121xxxxxx
2011-05-05 14:11:54,6, GSM1: Checking if modem is ready
2011-05-05 14:11:55,7, GSM1: -> AT
2011-05-05 14:11:55,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:11:55,7, GSM1: <- OK
2011-05-05 14:11:55,6, GSM1: Pre-initializing modem
2011-05-05 14:11:55,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-05 14:11:55,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:11:55,7, GSM1: <- OK
2011-05-05 14:11:55,6, GSM1: Initializing modem
2011-05-05 14:11:56,7, GSM1: -> AT+CPMS="ME"
2011-05-05 14:11:56,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:11:56,7, GSM1: <- +CPMS: 0,195,0,15,0,195 OK
2011-05-05 14:11:56,7, GSM1: -> AT+CSQ
2011-05-05 14:11:56,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:11:56,7, GSM1: <- +CSQ: 27,99 OK
2011-05-05 14:11:56,6, GSM1: Signal Strength Indicator: (27,99) -59 dBm (Excellent), Bit Error Rate: not known or not detectable
2011-05-05 14:11:56,6, GSM1: Checking if Modem is registered to the network
2011-05-05 14:11:57,7, GSM1: -> AT+CREG?
2011-05-05 14:11:57,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:11:57,7, GSM1: <- +CREG: 2,1,"3D44","0000A5C4" OK
2011-05-05 14:11:57,6, GSM1: Modem is registered to the network
2011-05-05 14:11:57,6, GSM1: Selecting PDU mode
2011-05-05 14:11:57,7, GSM1: -> AT+CMGF=0
2011-05-05 14:11:57,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:11:58,7, GSM1: <- OK
2011-05-05 14:11:58,7, GSM1: -> ATE1+CMGS=15
2011-05-05 14:11:58,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:11:58,7, GSM1: <- >
2011-05-05 14:11:58,7, GSM1: -> 00xxxxxxxxxxxxxxxxxxxxx0000FF0131
2011-05-05 14:11:58,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:12:20,7, GSM1: <- 00xxxxxxxxxxxxxxxxxxxxx0000FF0131 +CMS ERROR: 500 (Unknown error)
2011-05-05 14:12:20,5, GSM1: Verify PDU: OK
2011-05-05 14:12:20,7, GSM1: -> ATE0
2011-05-05 14:12:20,7, GSM1: Command is sent, waiting for the answer
2011-05-05 14:12:21,7, GSM1: <- ATE0 OK
2011-05-05 14:12:21,3, GSM1: The modem answer was not OK: 00xxxxxxxxxxxxxxxxxxxxx0000FF0131+CMS ERROR: 500 (Unknown error)
2011-05-05 14:12:21,5, GSM1: Waiting 30 sec. before retrying
my config:
devices = GSM1
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
incoming = /var/spool/sms/incoming
loglevel = 7
#alarmhandler = /usr/local/bin/alarmevent
alarmlevel = 4
delaytime = 20
errorsleeptime = 30
blocktime = 3600
receive_before_send = no
# autosplit 0=no 1=yes 2=with text numbers 3=concatenated
autosplit = 3
[queues]
OTHER = /var/spool/sms/OTHER
[provider]
OTHER = 0,1,2,3,4,5,6,7,8,9
[GSM1]
init = AT+CPMS="ME"
device = /dev/ttyACM1
incoming = yes
queues = OTHER
mode = new
baudrate = 19200
rtscts = yes
cs_convert = no
report = no
memory_start = 1
#message_count_clear = 60
verify_pdu=yes
Any idea?
Thanks for your help
chris
|
Page: 1
Time in this board is UTC.
|
|
|
 |
|
|
 |
|
