rbenea: Operating system name and version: Ubuntu 9.10
Version of smsd: 3.1.11
Smsd installed from: sources
Name and model of a modem / phone: Huawei E220
Interface: USB
Hi all,
I have a 2 USB Huawei modem setup and now I'm sending only on one provider and I don't want to set any queues or complex setups.
All is working perfectly BUT I don't know why smsd is not sending simultaneously on both modems using the default setup (no queues, no providers). The server is sending using GSM1 and reading incoming on GSM2, after max send on GSM1 the behaviour is switched: reading incoming on GSM1 and sending on GSM2.
The only way of sending on both modems simultaneous was to implement 2 queues GSM1 and GSM2 and specify in the SMS file what queue to use.
Any ideas?
The config:
devices = GSM1, GSM2
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
incoming = /var/spool/sms/incoming
logfile = /var/log/smsd.log
infofile = /var/run/smstools/smsd.working
pidfile = /var/run/smstools/smsd.pid
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
stats = /var/log/smstools/smsd_stats
receive_before_send = no
max_continuous_sending = 18
[default]
incoming = yes
rtscts = yes
memory_start=0
report = yes
baudrate = 115200
mode = new
phonecalls = clip
hangup_incoming_call = yes
[GSM1]
device = /dev/ttyUSB0
[GSM2]
device = /dev/ttyUSB2
|
