krzysioD: Operating system name and version: debian_version 6.0.4
Version of smsd: 3.0.2
Smsd installed from: package
Name and model of a modem / phone: SIMCOM_SIM300D
Interface: PCI (pseudo tty)
I use a G400P card (4 GSM modems on a PCI card) from OPENVOX.
it looks like this:
opvxg4xx module in kernel, the "g4term" and a socat to provide a bunch of /dev/vmodemX devices.
but i've stuck somehow: there is no incoimng sms:
2012-05-14 15:05:33,7, GSM2: Command is sent, waiting for the answer
2012-05-14 15:05:33,7, GSM2: <- AT+CPMS? +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2012-05-14 15:05:33,6, GSM2: Command failed.
2012-05-14 15:05:33,6, GSM2: No SMS received (reading interrupted)
(but why - command failed?)
and then when it's incoming sms:
2012-05-14 15:14:04,6, GSM2: Selecting PDU mode
2012-05-14 15:14:04,7, GSM2: -> AT+CMGF=0
2012-05-14 15:14:04,7, GSM2: Command is sent, waiting for the answer
2012-05-14 15:14:04,7, GSM2: <- AT+CMGF=0 OK
2012-05-14 15:14:04,6, GSM2: Checking memory size
2012-05-14 15:14:05,7, GSM2: -> AT+CPMS?
2012-05-14 15:14:05,7, GSM2: Command is sent, waiting for the answer
2012-05-14 15:14:05,7, GSM2: <- AT+CPMS? +CPMS: "SM",1,25,"SM",1,25,"SM",1,25 OK
2012-05-14 15:14:05,6, GSM2: Command failed.
2012-05-14 15:14:05,6, GSM2: No SMS received (reading interrupted)
also sending:
2012-05-14 13:07:08,6, GSM2: Sending SMS from to 48504xXxXxX
2012-05-14 13:07:08,6, GSM2: Checking if modem is ready
2012-05-14 13:07:09,7, GSM1: <- ATE0+CPMS="SM"+CNMI=2,0,0,2,1 +CPMS: 0,25,0,25,0,25 ERROR
2012-05-14 13:07:09,7, GSM2: -> AT
2012-05-14 13:07:09,7, GSM2: Command is sent, waiting for the answer
2012-05-14 13:07:09,7, GSM2: <- AT OK
2012-05-14 13:07:09,6, GSM2: Pre-initializing modem
2012-05-14 13:07:09,7, GSM2: -> ATE0+CMEE=1
2012-05-14 13:07:09,7, GSM2: Command is sent, waiting for the answer
2012-05-14 13:07:10,7, GSM2: <- ATE0+CMEE=1 OK
2012-05-14 13:07:10,7, GSM2: -> AT+CSQ
2012-05-14 13:07:10,7, GSM2: Command is sent, waiting for the answer
2012-05-14 13:07:10,7, GSM2: <- AT+CSQ +CSQ: 26,0 OK
2012-05-14 13:07:10,6, GSM2: Checking if Modem is registered to the network
2012-05-14 13:07:10,7, GSM2: -> AT+CREG?
2012-05-14 13:07:10,7, GSM2: Command is sent, waiting for the answer
2012-05-14 13:07:11,7, GSM2: <- AT+CREG? +CREG: 0,1 OK
2012-05-14 13:07:11,6, GSM2: Modem is registered to the network
2012-05-14 13:07:11,6, GSM2: Selecting PDU mode
2012-05-14 13:07:11,7, GSM2: -> AT+CMGF=0
2012-05-14 13:07:11,7, GSM2: Command is sent, waiting for the answer
2012-05-14 13:07:11,7, GSM2: <- AT+CMGF=0 OK
2012-05-14 13:07:11,7, GSM2: -> AT+CMGS=33
2012-05-14 13:07:11,7, GSM2: Command is sent, waiting for the answer
2012-05-14 13:07:12,7, GSM2: <- AT+CMGS=33 >
2012-05-14 13:07:12,7, GSM2: -> 0011000B918405145775F70000FF15D4E294FABC0641F77498FC6EBFE763D0BC3D07^Z
2012-05-14 13:07:12,7, GSM2: Command is sent, waiting for the answer
2012-05-14 13:08:09,7, GSM1: -> ATE0+CPMS="SM"+CNMI=2,0,0,2,1
2012-05-14 13:08:09,7, GSM1: Command is sent, waiting for the answer
2012-05-14 13:08:09,7, GSM1: <- ATE0+CPMS="SM"+CNMI=2,0,0,2,1 +CPMS: 0,25,0,25,0,25 ERROR
2012-05-14 13:08:09,3, GSM1: Modem did not accept the init string
2012-05-14 13:08:12,7, GSM2: put_command expected (OK)|(ERROR), timeout occurred. 1.
2012-05-14 13:08:12,7, GSM2: <- 0011000B918405145775F70000FF15D4E294FABC0641F77498FC6EBFE763D0BC3
2012-05-14 13:08:12,3, GSM2: The modem answer was not OK: 0011000B918405145775F70000FF15D4E294FABC0641F77498FC6EBFE763D0BC3
2012-05-14 13:08:12,5, GSM2: Waiting 60 sec. before retrying
2012-05-14 13:08:19,6, GSM1: Checking device for incoming SMS
|
