SMSTools3 Search

Welcome, Guest. The forum is currently read-only, but will open soon.

Fri Mar 14, 2025 10:47

• SMSTools3 Community » Search

Page: 1

Keywords: Mode: All keywords (AND)
Sun Jun 20, 2010 13:39 [answered] vodafone usb modem (Help and support)
marafa: the log shows that the sms was sent but i did _NOT_ receive it on my mobile. next, on v3.1.9 if instead of the binary sendsms i create a file in the outgoing directory (with the contents as shown above) i get the same response i.e. it is accepted and it is sent by smsd _BUT_ i did nt receive it on my mobile
Sun Jun 20, 2010 13:02 [answered] vodafone usb modem (Help and support)
marafa: sigh .. it wanted smsd to be in /usr/sbin and i was running around with /usr/local/bin and /usr/bin it still doesnt send even thought it accepts the message. note .. on 3.1.9 if i manually create the file i get the same response 2010-06-20 15:57:36,2, smsd: Smsd v3.1.10 started. 2010-06-20 15:57:36,2, smsd: Running as smstools:smstools. 2010-06-20 15:57:36,7, smsd: Running startup_check (shell): /tmp/smsd_script.fpXTAQ /tmp/smsd_data.10dcsX 2010-06-20 15:57:36,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0) 2010-06-20 15:57:36,4, smsd: File mode creation mask: 022 (0644, rw-r--r--). 2010-06-20 15:57:36,4, smsd: Using national prefixes: 0 2010-06-20 15:57:36,5, smsd: Outgoing file checker has started. PID: 25350. 2010-06-20 15:57:36,5, GSM1: Modem handler 0 has started. PID: 25352. Will only send messages. 2010-06-20 15:57:36,6, GSM1: Checking if modem is ready 2010-06-20 15:57:36,7, GSM1: -> AT 2010-06-20 15:57:36,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:36,7, GSM1: <- AT OK 2010-06-20 15:57:36,6, GSM1: Pre-initializing modem 2010-06-20 15:57:36,7, GSM1: -> ATE0+CMEE=1 2010-06-20 15:57:36,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:37,7, GSM1: <- ATE0+CMEE=1 OK 2010-06-20 15:57:37,6, GSM1: Checking if modem needs PIN 2010-06-20 15:57:37,7, GSM1: -> AT+CPIN? 2010-06-20 15:57:37,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:37,7, GSM1: <- +CPIN: READY OK 2010-06-20 15:57:37,6, GSM1: Initializing modem 2010-06-20 15:57:37,7, GSM1: -> ATZ 2010-06-20 15:57:37,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:38,7, GSM1: <- OK 2010-06-20 15:57:38,7, GSM1: -> AT+CSQ 2010-06-20 15:57:38,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:38,7, GSM1: <- AT+CSQ +CSQ: 11,99 OK 2010-06-20 15:57:38,6, GSM1: Checking if Modem is registered to the network 2010-06-20 15:57:38,7, GSM1: -> AT+CREG? 2010-06-20 15:57:38,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:39,7, GSM1: <- AT+CREG? +CREG: 0,1 OK 2010-06-20 15:57:39,6, GSM1: Modem is registered to the network 2010-06-20 15:57:39,6, GSM1: Selecting PDU mode 2010-06-20 15:57:39,6, GSM1: Selecting PDU mode 2010-06-20 15:57:39,7, GSM1: -> AT+CMGF=0 2010-06-20 15:57:39,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:39,7, GSM1: <- AT+CMGF=0 OK 2010-06-20 15:57:39,7, GSM1: -> AT+CIMI 2010-06-20 15:57:39,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:40,7, GSM1: <- AT+CIMI 602022017896489 OK 2010-06-20 15:57:40,7, GSM1: -> AT+CGSN 2010-06-20 15:57:40,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:40,7, GSM1: <- AT+CGSN 355855027164589 OK 2010-06-20 15:57:40,5, GSM1: CGSN: 355855027164589 2010-06-20 15:57:40,5, GSM1: CGSN: 355855027164589 2010-06-20 15:57:40,5, GSM1: IMSI: 602022017896489 2010-06-20 15:57:40,5, GSM1: Waiting for messages to send... 2010-06-20 15:57:40,5, GSM1: Waiting for messages to send... 2010-06-20 15:57:57,5, smsd: Moved file /var/spool/sms/outgoing/send_g8ssyJ to /var/spool/sms/checked 2010-06-20 15:57:57,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/send_g8ssyJ 2010-06-20 15:57:57,6, GSM1: Sending SMS from to 010... 2010-06-20 15:57:57,6, GSM1: Checking if modem is ready 2010-06-20 15:57:57,7, GSM1: -> AT 2010-06-20 15:57:57,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:57,7, GSM1: <- AT OK 2010-06-20 15:57:57,6, GSM1: Pre-initializing modem 2010-06-20 15:57:57,6, GSM1: Pre-initializing modem 2010-06-20 15:57:57,7, GSM1: -> ATE0+CMEE=1 2010-06-20 15:57:57,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:58,7, GSM1: <- ATE0+CMEE=1 OK 2010-06-20 15:57:58,6, GSM1: Initializing modem 2010-06-20 15:57:58,7, GSM1: -> ATZ 2010-06-20 15:57:58,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:58,7, GSM1: <- OK 2010-06-20 15:57:58,7, GSM1: -> AT+CSQ 2010-06-20 15:57:58,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:59,7, GSM1: <- AT+CSQ +CSQ: 11,99 OK 2010-06-20 15:57:59,6, GSM1: Checking if Modem is registered to the network 2010-06-20 15:57:59,7, GSM1: -> AT+CREG? 2010-06-20 15:57:59,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:57:59,7, GSM1: <- AT+CREG? +CREG: 0,1 OK 2010-06-20 15:57:59,6, GSM1: Modem is registered to the network 2010-06-20 15:57:59,6, GSM1: Selecting PDU mode 2010-06-20 15:57:59,7, GSM1: -> AT+CMGF=0 2010-06-20 15:57:59,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:58:00,7, GSM1: <- AT+CMGF=0 OK 2010-06-20 15:58:00,7, GSM1: -> AT+CMGS=30 2010-06-20 15:58:00,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:58:00,7, GSM1: <- AT+CMGS=30 > 2010-06-20 15:58:00,7, GSM1: -> 0011000AA110105300020000FF13B0182C36ABC1603218882E4F87D9A0980D▒ 2010-06-20 15:58:00,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:58:02,7, GSM1: <- 0011000AA110105300020000FF13B0182C36ABC1603218882E4F87D9A0980D +CMGS: 194 OK 2010-06-20 15:58:02,5, GSM1: SMS sent, Message_id: 194, To: 0101350020, sending time 5 sec. 2010-06-20 15:58:02,6, GSM1: Deleted file /var/spool/sms/checked/send_g8ssyJ the file that i put in the outgoing directory To: 010... To_TOA: National Trial with national number and again.. thank you very much for your patience
Sun Jun 20, 2010 12:43 [answered] vodafone usb modem (Help and support)
marafa: pls double check your end. i went as far as downloading v3.1.10 again and recompiling it and overwriting my current smsd. it still says 3.1.9
Sun Jun 20, 2010 12:23 [answered] vodafone usb modem (Help and support)
marafa: the log when sending to 010... 2010-06-20 15:15:50,2, smsd: Smsd mainprocess is awaiting the termination of all modem handlers. PID: 24041. 2010-06-20 15:15:50,2, GSM1: Modem handler 0 terminated. PID: 24043, was started 10-06-20 15:02:38. 2010-06-20 15:15:50,2, smsd: Smsd mainprocess terminated. PID 24041, was started 10-06-20 15:02:38. 2010-06-20 15:15:50,2, smsd: Smsd v3.1.9 started. 2010-06-20 15:15:50,2, smsd: Running as smstools:smstools. 2010-06-20 15:15:50,7, smsd: Running startup_check (shell): /tmp/smsd_script.IDBPLK /tmp/smsd_data.JQysil 2010-06-20 15:15:50,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0) 2010-06-20 15:15:50,4, smsd: File mode creation mask: 022 (0644, rw-r--r--). 2010-06-20 15:15:50,5, smsd: Outgoing file checker has started. PID: 24243. 2010-06-20 15:15:50,5, GSM1: Modem handler 0 has started. PID: 24245. Will only send messages. 2010-06-20 15:15:50,6, GSM1: Checking if modem is ready 2010-06-20 15:15:50,7, GSM1: -> AT 2010-06-20 15:15:50,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:15:50,7, GSM1: <- AT OK 2010-06-20 15:15:50,6, GSM1: Pre-initializing modem 2010-06-20 15:15:51,7, GSM1: -> ATE0+CMEE=1 2010-06-20 15:15:51,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:15:51,7, GSM1: <- ATE0+CMEE=1 OK 2010-06-20 15:15:51,6, GSM1: Checking if modem needs PIN 2010-06-20 15:15:51,7, GSM1: -> AT+CPIN? 2010-06-20 15:15:51,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:15:51,7, GSM1: <- +CPIN: READY OK 2010-06-20 15:15:51,6, GSM1: Initializing modem 2010-06-20 15:15:52,7, GSM1: -> ATZ 2010-06-20 15:15:52,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:15:52,7, GSM1: <- OK 2010-06-20 15:15:52,7, GSM1: -> AT+CSQ 2010-06-20 15:15:52,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:15:52,7, GSM1: <- AT+CSQ +CSQ: 9,99 OK 2010-06-20 15:15:52,6, GSM1: Checking if Modem is registered to the network 2010-06-20 15:15:53,7, GSM1: -> AT+CREG? 2010-06-20 15:15:53,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:15:53,7, GSM1: <- AT+CREG? +CREG: 0,1 OK 2010-06-20 15:15:53,6, GSM1: Modem is registered to the network 2010-06-20 15:15:53,6, GSM1: Selecting PDU mode 2010-06-20 15:15:53,7, GSM1: -> AT+CMGF=0 2010-06-20 15:15:53,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:15:53,7, GSM1: <- AT+CMGF=0 OK 2010-06-20 15:15:54,7, GSM1: -> AT+CIMI 2010-06-20 15:15:54,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:15:54,7, GSM1: <- AT+CIMI 602022017896489 OK 2010-06-20 15:15:54,7, GSM1: -> AT+CGSN 2010-06-20 15:15:54,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:15:54,7, GSM1: <- AT+CGSN 355855027164589 OK 2010-06-20 15:15:54,5, GSM1: CGSN: 355855027164589 2010-06-20 15:15:54,5, GSM1: IMSI: 602022017896489 2010-06-20 15:15:54,5, GSM1: Waiting for messages to send... 2010-06-20 15:16:11,5, smsd: Moved file /var/spool/sms/outgoing/send_UiUHa4 to /var/spool/sms/checked 2010-06-20 15:16:11,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/send_UiUHa4 2010-06-20 15:16:11,6, GSM1: Sending SMS from to <mobile_number> 2010-06-20 15:16:11,6, GSM1: Checking if modem is ready 2010-06-20 15:16:11,7, GSM1: -> AT 2010-06-20 15:16:11,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:16:11,7, GSM1: <- AT OK 2010-06-20 15:16:11,6, GSM1: Pre-initializing modem 2010-06-20 15:16:12,7, GSM1: -> ATE0+CMEE=1 2010-06-20 15:16:12,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:16:12,7, GSM1: <- ATE0+CMEE=1 OK 2010-06-20 15:16:12,6, GSM1: Initializing modem 2010-06-20 15:16:12,7, GSM1: -> ATZ 2010-06-20 15:16:12,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:16:13,7, GSM1: <- OK 2010-06-20 15:16:13,7, GSM1: -> AT+CSQ 2010-06-20 15:16:13,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:16:13,7, GSM1: <- AT+CSQ +CSQ: 12,99 OK 2010-06-20 15:16:13,6, GSM1: Checking if Modem is registered to the network 2010-06-20 15:16:13,7, GSM1: -> AT+CREG? 2010-06-20 15:16:13,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:16:14,7, GSM1: <- AT+CREG? +CREG: 0,1 OK 2010-06-20 15:16:14,6, GSM1: Modem is registered to the network 2010-06-20 15:16:14,6, GSM1: Selecting PDU mode 2010-06-20 15:16:14,6, GSM1: Selecting PDU mode 2010-06-20 15:16:14,7, GSM1: -> AT+CMGF=0 2010-06-20 15:16:14,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:16:14,7, GSM1: <- AT+CMGF=0 OK 2010-06-20 15:16:14,7, GSM1: -> AT+CMGS=30 2010-06-20 15:16:14,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:16:15,7, GSM1: <- AT+CMGS=30 > 2010-06-20 15:16:15,7, GSM1: -> 0011000A9110105300020000FF13B0182C36ABC1603218882E4F87D9A0580D▒ 2010-06-20 15:16:15,7, GSM1: Command is sent, waiting for the answer 2010-06-20 15:16:41,7, GSM1: <- 0011000A9110105300020000FF13B0182C36ABC1603218882E4F87D9A0580D +CMS ERROR: 500 (Unknown error) 2010-06-20 15:16:41,3, GSM1: The modem answer was not OK: 0011000A9110105300020000FF13B0182C36ABC1603218882E4F87D9A0580D+CMS ERROR: 500 (Unknown error) 2010-06-20 15:16:41,5, GSM1: Waiting 10 sec. before retrying and my _working_ smsd.conf devices = GSM1 logfile = /var/log/smsd/smsd.log loglevel = 7 user = smstools smart_logging = yes pidfile = /var/run/smsd/smsd.pid national_prefixes = 0 blocktime = 60 whitelist = /var/lib/smstools/whitelist.txt [GSM1] device = /dev/ttyUSB0 init = ATZ voicecall_hangup_ath = yes hangup_incoming_call = yes voicecall_ignore_modem_response = yes incoming = no outgoing = yes cs_convert = yes decode_unicode_text = yes internal_combine = yes ps. i think you dint changed the version number for 3.1.10 from 3.1.9
Sun Jun 20, 2010 12:00 [answered] vodafone usb modem (Help and support)
marafa: hello keke thank you so much for all your help i am sorry to say i do not understand what a PDU is nor how i can configure it to accept phone numbers with 010.. format thanks
Sun Jun 20, 2010 10:53 [answered] vodafone usb modem (Help and support)
marafa: oh and i need to speed up processing of the messages
Sun Jun 20, 2010 10:52 [answered] vodafone usb modem (Help and support)
marafa: i dont want to recieve however out of the 3 numbers 002010.. works 2010.. works 010.. does NOT work i need to have it accept and send in the last format coz all the numbers here (and applications - there are apparently 3 different applications) use the last format
Sun Jun 20, 2010 10:41 [answered] vodafone usb modem (Help and support)
marafa: it worked! :P i'd overlooked your suggestion for smsc so i am posting my smsd.conf here for you and others: devices = GSM1 logfile = /var/log/smsd/smsd.log loglevel = 7 user = smstools smart_logging = yes pidfile = /var/run/smsd/smsd.pid national_prefixes = 0 blocktime = 60 [GSM1] device = /dev/ttyUSB0 init = ATZ voicecall_hangup_ath = yes hangup_incoming_call = yes voicecall_ignore_modem_response = yes incoming = no outgoing = yes smsc = 20105996500 cs_convert = yes decode_unicode_text = yes internal_combine = yes thank you keke!
Sun Jun 20, 2010 08:07 [answered] vodafone usb modem (Help and support)
marafa: hi again the order of the trial messages i sent were 010.. 002010.. 2010..
Sun Jun 20, 2010 07:54 [answered] vodafone usb modem (Help and support)
marafa: hi keke i am impressed you wrote not one but TWO bug fixes especially for me. thanks. however, the new version also does not work :( i tried with "national_prefixes = 0" and without. each time i sent 3 messages the number would be 002010..or 2010.. or 010.. the same error message showed up 2010-06-20 10:53:31,7, GSM1: -> 0011000B910201310520F00000FF1332580C169BD56030190C4497A7C36C900D▒ 2010-06-20 10:53:31,7, GSM1: Command is sent, waiting for the answer 2010-06-20 10:53:57,7, GSM1: <- 0011000B910201310520F00000FF1332580C169BD56030190C4497A7C36C900D +CMS ERROR: 500 (Unknown error) 2010-06-20 10:53:57,3, GSM1: The modem answer was not OK: 0011000B910201310520F00000FF1332580C169BD56030190C4497A7C36C900D+CMS ERROR: 500 (Unknown error) 2010-06-20 10:53:57,4, GSM1: Sending SMS to 20101350020 failed 2010-06-20 10:53:57,6, GSM1: Deleted file /var/spool/sms/checked/send_pPKXEc 2010-06-20 10:53:57,2, GSM1: Fatal error: sending failed 3 times. Blocking 3600 sec. thanks
Sat Jun 19, 2010 11:28 [answered] vodafone usb modem (Help and support)
marafa: ah no sms sent out neither in local format or international format
Sat Jun 19, 2010 11:27 [answered] vodafone usb modem (Help and support)
marafa: hi keke thanks for your very fast response i do not want to use international format as my application doesnt have the mobile numbers recorded in international format. yes i got CMS 500 errors i will put the SMSC number in pre_init - was taken from another forum post here for one of my earlier problems. i will remove it and try again the sim works. it has been with me for years. i previously (about 2 years ago) used the vodafone's betavine software to send sms from it. my conf after changes: devices = GSM1 logfile = /var/log/smsd/smsd.log loglevel = 7 user = smstools smart_logging = yes pidfile = /var/run/smsd/smsd.pid national_prefixes = 0 [GSM1] device = /dev/ttyUSB0 init = ATZ voicecall_hangup_ath = yes hangup_incoming_call = yes voicecall_ignore_modem_response = yes incoming = no outgoing = yes smsc = 0020105996500 cs_convert = yes decode_unicode_text = yes my log when i tried to send the sms: 2010-06-19 14:21:53,5, GSM1: Waiting 10 sec. before retrying 2010-06-19 14:22:03,6, GSM1: Checking if modem is ready 2010-06-19 14:22:03,7, GSM1: -> AT 2010-06-19 14:22:03,7, GSM1: Command is sent, waiting for the answer 2010-06-19 14:22:03,7, GSM1: <- AT OK 2010-06-19 14:22:03,6, GSM1: Pre-initializing modem 2010-06-19 14:22:03,7, GSM1: -> ATE0+CMEE=1 2010-06-19 14:22:03,7, GSM1: Command is sent, waiting for the answer 2010-06-19 14:22:04,7, GSM1: <- ATE0+CMEE=1 OK 2010-06-19 14:22:04,6, GSM1: Initializing modem 2010-06-19 14:22:04,6, GSM1: Initializing modem 2010-06-19 14:22:04,7, GSM1: -> ATZ 2010-06-19 14:22:04,7, GSM1: Command is sent, waiting for the answer 2010-06-19 14:22:04,7, GSM1: <- OK 2010-06-19 14:22:04,7, GSM1: -> AT+CSQ 2010-06-19 14:22:04,7, GSM1: Command is sent, waiting for the answer 2010-06-19 14:22:05,7, GSM1: <- AT+CSQ +CSQ: 10,99 OK 2010-06-19 14:22:05,6, GSM1: Checking if Modem is registered to the network 2010-06-19 14:22:05,7, GSM1: -> AT+CREG? 2010-06-19 14:22:05,7, GSM1: Command is sent, waiting for the answer 2010-06-19 14:22:05,7, GSM1: <- AT+CREG? +CREG: 0,1 OK 2010-06-19 14:22:05,6, GSM1: Modem is registered to the network 2010-06-19 14:22:05,6, GSM1: Selecting PDU mode 2010-06-19 14:22:05,7, GSM1: -> AT+CMGF=0 2010-06-19 14:22:05,7, GSM1: Command is sent, waiting for the answer 2010-06-19 14:22:06,7, GSM1: <- AT+CMGF=0 OK 2010-06-19 14:22:06,6, GSM1: Changing SMSC 2010-06-19 14:22:06,7, GSM1: -> AT+CSCA="+0020105996500" 2010-06-19 14:22:06,7, GSM1: Command is sent, waiting for the answer 2010-06-19 14:22:06,7, GSM1: <- AT+CSCA="+0020105996500" OK 2010-06-19 14:22:07,7, GSM1: -> AT+CMGS=29 2010-06-19 14:22:07,7, GSM1: Command is sent, waiting for the answer 2010-06-19 14:22:07,7, GSM1: <- AT+CMGS=29 > 2010-06-19 14:22:07,7, GSM1: -> 0011000A9110105300020000FF12B0182C36ABC1603218882E4F87D9201A▒ 2010-06-19 14:22:07,7, GSM1: Command is sent, waiting for the answer 2010-06-19 14:22:33,7, GSM1: <- 0011000A9110105300020000FF12B0182C36ABC1603218882E4F87D9201A +CMS ERROR: 500 (Unknown error) 2010-06-19 14:22:33,3, GSM1: The modem answer was not OK: 0011000A9110105300020000FF12B0182C36ABC1603218882E4F87D9201A+CMS ERROR: 500 (Unknown error) 2010-06-19 14:22:33,4, GSM1: Sending SMS to <mobile_number> failed 2010-06-19 14:22:33,6, GSM1: Deleted file /var/spool/sms/checked/send_LHYRSg 2010-06-19 14:22:33,2, GSM1: Fatal error: sending failed 3 times. Blocking 3600 sec.
Sat Jun 19, 2010 10:39 [answered] vodafone usb modem (Help and support)
marafa: keke first of all i would like to thank you for your patience. seriously next, i think i should explain what i want to do with smstools. i have set up a monitoring tool (zenoss) to send out sms alerts. however, the software we use is extremely old on old hardware and would like to very much migrate it from proprietary to open source software. the program will not receive any sms plus all sms sent will only be to local numbers anyways, i did as you said and put the national_prefixes = 0 in the global section. i restarted smsd. i sent 3 sms the first with local number the second with full international number the third with the + sign as part of the international number no luck on any of the 3 trials i am adding the smsd.conf file after the changes: devices = GSM1 logfile = /var/log/smsd/smsd.log loglevel = 7 user = smstools smart_logging = yes pidfile = /var/run/smsd/smsd.pid national_prefixes = 0 [GSM1] device = /dev/ttyUSB0 incoming = no init = ATZ pre_init = no outgoing = yes voicecall_hangup_ath = yes hangup_incoming_call = yes voicecall_ignore_modem_response = yes cs_convert = yes decode_unicode_text = yes internal_combine = yes
Sat Jun 19, 2010 08:23 [answered] vodafone usb modem (Help and support)
marafa: yes and yes :D i had mode-old and at the same time i was sending single digits (test numbers) :) but it still doesnt pass the block character problem. my log: 2010-06-19 11:13:55,6, GSM1: Selecting PDU mode 2010-06-19 11:13:55,7, GSM1: -> AT+CMGF=0 2010-06-19 11:13:55,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:13:55,7, GSM1: <- AT+CMGF=0 OK 2010-06-19 11:13:55,7, GSM1: -> AT+CMGS=16 2010-06-19 11:13:55,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:13:56,7, GSM1: <- AT+CMGS=16 > 2010-06-19 11:13:56,7, GSM1: -> 0011000B910201310520F00000FF02B118▒ 2010-06-19 11:13:56,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:14:22,7, GSM1: <- 0011000B910201310520F00000FF02B118 +CMS ERROR: 500 (Unknown error) 2010-06-19 11:14:22,3, GSM1: The modem answer was not OK: 0011000B910201310520F00000FF02B118+CMS ERROR: 500 (Unknown error) 2010-06-19 11:14:22,3, GSM1: The modem answer was not OK: 0011000B910201310520F00000FF02B118+CMS ERROR: 500 (Unknown error) 2010-06-19 11:14:22,5, GSM1: Waiting 10 sec. before retrying 2010-06-19 11:14:22,5, GSM1: Waiting 10 sec. before retrying 2010-06-19 11:14:32,6, GSM1: Checking if modem is ready 2010-06-19 11:14:32,7, GSM1: -> AT 2010-06-19 11:14:32,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:14:32,7, GSM1: <- AT OK 2010-06-19 11:14:32,6, GSM1: Initializing modem 2010-06-19 11:14:32,7, GSM1: -> ATZ 2010-06-19 11:14:32,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:14:33,7, GSM1: <- ATZ OK 2010-06-19 11:14:33,7, GSM1: -> AT+CSQ 2010-06-19 11:14:33,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:14:33,7, GSM1: <- AT+CSQ +CSQ: 8,99 OK 2010-06-19 11:14:33,6, GSM1: Checking if Modem is registered to the network 2010-06-19 11:14:33,7, GSM1: -> AT+CREG? 2010-06-19 11:14:33,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:14:34,7, GSM1: <- AT+CREG? +CREG: 0,1 OK 2010-06-19 11:14:34,6, GSM1: Modem is registered to the network 2010-06-19 11:14:34,6, GSM1: Selecting PDU mode 2010-06-19 11:14:34,6, GSM1: Modem is registered to the network 2010-06-19 11:14:34,6, GSM1: Selecting PDU mode 2010-06-19 11:14:34,7, GSM1: -> AT+CMGF=0 2010-06-19 11:14:34,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:14:34,7, GSM1: <- AT+CMGF=0 OK 2010-06-19 11:14:34,7, GSM1: -> AT+CMGS=16 2010-06-19 11:14:34,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:14:35,7, GSM1: <- AT+CMGS=16 > 2010-06-19 11:14:35,7, GSM1: -> 0011000B910201310520F00000FF02B118▒ 2010-06-19 11:14:35,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:15:40,6, GSM1: Deleted file /var/spool/sms/checked/send_4uZZOd 2010-06-19 11:15:54,5, smsd: Moved file /var/spool/sms/outgoing/send_FPS6sM to /var/spool/sms/checked 2010-06-19 11:15:54,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/send_FPS6sM 2010-06-19 11:15:54,6, GSM1: Sending SMS from to <Mobile_Number> 2010-06-19 11:15:54,6, GSM1: Checking if modem is ready 2010-06-19 11:15:54,7, GSM1: -> AT 2010-06-19 11:15:54,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:15:54,7, GSM1: <- AT OK 2010-06-19 11:15:54,6, GSM1: Initializing modem 2010-06-19 11:15:54,6, GSM1: Initializing modem 2010-06-19 11:15:54,7, GSM1: -> ATZ 2010-06-19 11:15:54,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:15:55,7, GSM1: <- ATZ OK 2010-06-19 11:15:55,7, GSM1: -> AT+CSQ 2010-06-19 11:15:55,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:15:55,7, GSM1: <- AT+CSQ +CSQ: 5,99 OK 2010-06-19 11:15:55,6, GSM1: Checking if Modem is registered to the network 2010-06-19 11:15:55,7, GSM1: -> AT+CREG? 2010-06-19 11:15:55,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:15:56,7, GSM1: <- AT+CREG? +CREG: 0,1 OK 2010-06-19 11:15:56,6, GSM1: Modem is registered to the network 2010-06-19 11:15:56,6, GSM1: Selecting PDU mode M1: Modem is registered to the network 2010-06-19 11:15:56,6, GSM1: Selecting PDU mode 2010-06-19 11:15:56,7, GSM1: -> AT+CMGF=0 2010-06-19 11:15:56,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:15:56,7, GSM1: <- AT+CMGF=0 OK 2010-06-19 11:15:56,7, GSM1: -> AT+CMGS=19 2010-06-19 11:15:57,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:15:57,7, GSM1: <- AT+CMGS=19 > 2010-06-19 11:15:57,7, GSM1: -> 0011000A9110105300020000FF06F4F29C1E9301▒ 2010-06-19 11:15:57,7, GSM1: Command is sent, waiting for the answer 2010-06-19 11:16:23,7, GSM1: <- 0011000A9110105300020000FF06F4F29C1E9301 +CMS ERROR: 500 (Unknown error) 2010-06-19 11:16:23,3, GSM1: The modem answer was not OK: 0011000A9110105300020000FF06F4F29C1E9301+CMS ERROR: 500 (Unknown error) also i think it might be helpful if you saw my smsd.conf file: devices = GSM1 logfile = /var/log/smsd/smsd.log loglevel = 7 user = smstools smart_logging = yes pidfile = /var/run/smsd/smsd.pid [GSM1] device = /dev/ttyUSB0 incoming = no memory_start = 1 init = ATZ pre_init = no outgoing = yes rtscts = yes baudrate = 230400 memory_start=0 voicecall_hangup_ath = yes hangup_incoming_call = yes voicecall_ignore_modem_response = yes cs_convert = yes decode_unicode_text = yes internal_combine = yes of course, all the settings above are from a newbie
Fri Jun 18, 2010 18:47 [answered] vodafone usb modem (Help and support)
marafa: hi i had installed smstools from fedora repos and i hope i didnt muck things up by doing this. i downloaded and compiled the version you recommended. then i _copied_ smsd to /usr/bin overwriting the old version. the logs now show this: 2010-06-18 21:32:15,7, GSM1: -> 01000A91101053000200000138▒ 2010-06-18 21:32:15,7, GSM1: Command is sent, waiting for the answer 2010-06-18 21:32:41,7, GSM1: <- 01000A91101053000200000138 ^RSSI:9 ^RSSI:9 ^RSSI:9 ^RSSI:9 ^RSSI:9 ^RSSI:9 ^RSSI:9 ^RSSI:9 ^RSSI:9 +CMS ERROR: 500 (Unknown error) 2010-06-18 21:32:41,3, GSM1: The modem answer was not OK: 01000A91101053000200000138^RSSI:9^RSSI:9^RSSI:9^RSSI:9^RSSI:9^RSSI:9^RSSI:9^RSSI:9^RSSI:9+CMS ERROR: 500 (Unknown error) 2010-06-18 21:32:41,4, GSM1: Sending SMS to <mobile_number> failed
Thu Jun 17, 2010 16:14 [answered] vodafone usb modem (Help and support)
marafa: Operating system name and version: fedora 13 - 64 bit Version of smsd: 3.1.5.4.fc13 Smsd installed from: package repository Name and model of a modem / phone: 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Interface: /dev/ttyUSB0 i have never been able to send an sms message but i can talk to my modem via minicom. sometimes smstools can talk to my modem. however, whenever smstools sends the box like character i get problems: 2010-06-17 18:38:03,7, GSM1: -> ▒ 2010-06-17 18:38:03,7, GSM1: Command is sent, waiting for the answer and then i get entries in my log like: Command is sent, waiting for the answer or Modem is not ready to answer commands (Timeouts: 1) any help would be highly appreciated

Page: 1

• SMSTools3 Community » Search

Top

Time in this board is UTC.