monarch: Operating system name and version: Debian Squeeze
Version of smsd: 3.1.15
Smsd installed from: source
Name and model of a modem: Zoom 4598 3g 7.2 Mbits Modem
Interface: USB, ttyACM0
I am attempting to send messages, and getting AT+CSQ? (not 0 or 99),(not 99), AT+CREG? 2.4 MODEM NOT REGISTERED. AT+CPIN? gives me READY, AT gives me OK. I can post the logs if necessary.
The modem successfully sends using its proprietary software that auto-installs on windows, fyi
My configuration is standard for sms server tools 3.1.15, although my device is ttyACM0.
|
monarch: So, I managed to determine that I had the wrong port selected (Thanks to minicom). I can get an AT (OK) and AT+CREG? (OK). I am, however, getting "modem not ready to accept commands". I've done some googling, and can't figure out where the problem could be. Is the modem's driver not installed properly? If so, why am I getting successful AT and AT+CREG? responses? Can you point me in the right direction?
|
monarch: Operating system name and version: Debian Squeeze
Version of smsd: 3.1.11
Smsd installed from: apt-get, likely the standard repository
Name and model of a modem: Indosat IM2
Interface: USB
Below I've posted the log file of what's been happening. I put a file in /outgoing/, it gets moved to checked. Then nothing happens. I'll be honest I don't know what's going on very well, but from what i can tell, the AT command is being sent, and the modem isn't responding. I'm using the standard config file that came with smstools. I will however paste the config if I need to.
I appreciate any help in advance. Also, the issue I'm having is near the bottom, this log paste is a little larger than it needs to be.
2013-02-28 15:58:01,2, smsd: Smsd v3.1.11 started.
2013-02-28 15:58:01,2, smsd: Running as smsd:dialout.
2013-02-28 15:58:01,2, smsd: There was 1 error while reading the config file:
2013-02-28 15:58:01,2, smsd: - Unknown global setting: device
2013-02-28 15:58:01,2, smsd: Incoming directory yes cannot be opened.
2013-02-28 15:58:01,7, smsd: Running startup_check (shell): /tmp/smsd_script.uTcbpV /tmp/smsd_data.ZCiiS9
2013-02-28 15:58:01,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2013-02-28 15:58:01,2, smsd: There was 2 major problems found.
2013-02-28 15:58:01,2, smsd: Smsd mainprocess terminated.
2013-02-28 15:58:51,2, smsd: Smsd v3.1.11 started.
2013-02-28 15:58:51,2, smsd: Running as smsd:dialout.
2013-02-28 15:58:51,2, smsd: There was 1 error while reading the config file:
2013-02-28 15:58:51,2, smsd: - Unknown global setting: device
2013-02-28 15:58:51,2, smsd: Incoming directory yes cannot be opened.
2013-02-28 15:58:51,7, smsd: Running startup_check (shell): /tmp/smsd_script.BGK1pJ /tmp/smsd_data.V7B4da
2013-02-28 15:58:51,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2013-02-28 15:58:51,2, smsd: There was 2 major problems found.
2013-02-28 15:58:51,2, smsd: Smsd mainprocess terminated.
2013-02-28 16:05:31,2, smsd: Smsd v3.1.11 started.
2013-02-28 16:05:31,2, smsd: Running as root:root.
2013-02-28 16:05:31,7, smsd: Running startup_check (shell): /tmp/smsd_script.B5REsZ /tmp/smsd_data.g4Nc6L
2013-02-28 16:05:31,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2013-02-28 16:05:31,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2013-02-28 16:05:31,5, smsd: Outgoing file checker has started. PID: 1605.
2013-02-28 16:05:31,5, GSM1: Modem handler 0 has started. PID: 1606.
2013-02-28 16:05:31,5, GSM1: Using check_memory_method 1: CPMS is used.
2013-02-28 16:05:31,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/test.sms
2013-02-28 16:05:31,6, GSM1: Sending SMS from to 18057045518
2013-02-28 16:05:31,6, GSM1: Checking if modem is ready
2013-02-28 16:05:31,7, GSM1: -> AT
2013-02-28 16:05:32,5, smsd: Moved file /var/spool/sms/outgoing/1.sms to /var/spool/sms/checked
2013-02-28 16:09:53,2, smsd: Smsd mainprocess is awaiting the termination of all modem handlers. PID: 1605.
2013-02-28 16:10:08,7, GSM1: Command is sent, waiting for the answer
2013-02-28 16:10:12,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 1.
2013-02-28 16:10:12,7, GSM1: <-
2013-02-28 16:10:12,6, GSM1: Moved file /var/spool/sms/checked/test.sms to /var/spool/sms/failed/test.sms
2013-02-28 16:10:13,2, GSM1: Modem handler 0 terminated. PID: 1606, was started 13-02-28 16:05:31.
2013-02-28 16:10:48,2, smsd: Smsd v3.1.11 started.
2013-02-28 16:10:48,2, smsd: Running as smsd:dialout.
2013-02-28 16:10:48,7, smsd: Running startup_check (shell): /tmp/smsd_script.JOAY97 /tmp/smsd_data.vNP31D
2013-02-28 16:10:48,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2013-02-28 16:10:48,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2013-02-28 16:10:48,5, smsd: Outgoing file checker has started. PID: 1077.
2013-02-28 16:10:49,5, GSM1: Modem handler 0 has started. PID: 1078.
2013-02-28 16:10:49,5, GSM1: Using check_memory_method 1: CPMS is used.
2013-02-28 16:10:49,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/2.sms
2013-02-28 16:10:49,6, GSM1: Sending SMS from to 18057045518
2013-02-28 16:10:49,6, GSM1: Checking if modem is ready
2013-02-28 16:10:49,7, GSM1: -> AT
2013-02-28 16:11:49,5, smsd: Moved file /var/spool/sms/outgoing/something.sms to /var/spool/sms/checked
2013-02-28 16:12:54,2, smsd: Smsd mainprocess is awaiting the termination of all modem handlers. PID: 1077.
2013-02-28 16:13:51,7, GSM1: Command is sent, waiting for the answer
2013-02-28 16:13:55,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 1.
2013-02-28 16:13:55,7, GSM1: <-
2013-02-28 16:13:55,6, GSM1: Moved file /var/spool/sms/checked/2.sms to /var/spool/sms/failed/2.sms
2013-02-28 16:13:56,2, GSM1: Modem handler 0 terminated. PID: 1078, was started 13-02-28 16:10:48.
2013-02-28 16:15:23,2, smsd: Smsd v3.1.11 started.
2013-02-28 16:15:23,2, smsd: Running as smsd:dialout.
2013-02-28 16:15:23,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
|
