|
|
| SMS Server Tools 3 Community |
| Welcome, Guest. The forum is currently read-only, but will open soon. |
Fri Aug 29, 2025 19:32 |
Page: 1
| Keywords: Mode: All keywords (AND) |
|
Thu Jan 27, 2011 14:57
|
obelix: Ok, adding
init = AT^CURC=0
fixed the problem of unexpected input.
but i am not sure what this cmd really does....
|
|
Thu Jan 27, 2011 14:33
|
obelix: hi keke,
thx for your answer!
i tried those config settings and this is the result:
2011-01-27 15:10:08,2, smsd: Smsd v3.1.14 started.
2011-01-27 15:10:08,2, smsd: Running as root:root.
2011-01-27 15:10:08,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.oRrmLA /tmp/smsd_data.8WPZiP
2011-01-27 15:10:08,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2011-01-27 15:10:08,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2011-01-27 15:10:08,5, smsd: Outgoing file checker has started. PID: 11183.
2011-01-27 15:10:08,5, GSM1: Modem handler 0 has started. PID: 11185. Will only send messages.
2011-01-27 15:10:08,7, smsd: All PID's: 11183,11185
2011-01-27 15:10:08,6, GSM1: Checking if modem is ready
2011-01-27 15:10:08,3, GSM1: Unexpected input: ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^RSSI:13 ^BOOT:35954679,0,0,0,75 ^SIMST:1 ^SRVST:2 ^RSSI:6 ^RSSI:6 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:359546
79,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75 ^BOOT:35954679,0,0,0,75
2011-01-27 15:10:08,7, GSM1: -> AT
2011-01-27 15:10:08,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:10:09,7, GSM1: <- OK
2011-01-27 15:10:09,6, GSM1: Pre-initializing modem
2011-01-27 15:10:09,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-01-27 15:10:09,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:10:09,7, GSM1: <- OK
2011-01-27 15:10:09,6, GSM1: Checking if modem needs PIN
2011-01-27 15:10:09,7, GSM1: -> AT+CPIN?
2011-01-27 15:10:09,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:10:10,7, GSM1: <- +CPIN: READY OK
2011-01-27 15:10:10,7, GSM1: -> AT+CSQ
2011-01-27 15:10:10,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:10:10,7, GSM1: <- +CSQ: 6,99 OK
2011-01-27 15:10:10,6, GSM1: Signal Strength Indicator: (6,99) -101 dBm (Marginal)
2011-01-27 15:10:10,6, GSM1: Selecting PDU mode
2011-01-27 15:10:10,7, GSM1: -> AT+CMGF=0
2011-01-27 15:10:10,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:10:11,7, GSM1: <- OK
2011-01-27 15:10:11,7, GSM1: -> AT+CIMI
2011-01-27 15:10:11,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:10:11,7, GSM1: <- 262032011758141 OK
2011-01-27 15:10:11,7, GSM1: -> AT+CGSN
2011-01-27 15:10:11,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:10:12,7, GSM1: <- 354764035954679 OK
2011-01-27 15:10:12,5, GSM1: CGSN: 354764035954679
2011-01-27 15:10:12,5, GSM1: IMSI: 262032011758141
2011-01-27 15:10:12,7, GSM1: ## Start of device details
2011-01-27 15:10:12,7, GSM1: # Manufacturer identification:
2011-01-27 15:10:12,7, GSM1: -> AT+CGMI
2011-01-27 15:10:12,7, GSM1: <- huawei
OK
2011-01-27 15:10:12,7, GSM1: # Model identification:
2011-01-27 15:10:12,7, GSM1: -> AT+CGMM
2011-01-27 15:10:13,7, GSM1: <- E160
OK
2011-01-27 15:10:13,7, GSM1: # Revision identification:
2011-01-27 15:10:13,7, GSM1: -> AT+CGMR
2011-01-27 15:10:13,7, GSM1: <- 11.608.06.00.52
OK
2011-01-27 15:10:13,7, GSM1: # New message indications, list of supported modes:
2011-01-27 15:10:13,7, GSM1: -> AT+CNMI=?
2011-01-27 15:10:14,7, GSM1: <- +CNMI: (0,1,2),(0,1,2,3),(0,2),(0,1,2),(0,1)
OK
2011-01-27 15:10:14,7, GSM1: # New message indications, current settings:
2011-01-27 15:10:14,7, GSM1: -> AT+CNMI?
2011-01-27 15:10:14,7, GSM1: <- +CNMI: 0,0,0,0,0
OK
2011-01-27 15:10:14,7, GSM1: # Preferred message storage, list of supported mem's:
2011-01-27 15:10:14,7, GSM1: -> AT+CPMS=?
2011-01-27 15:10:15,7, GSM1: <- +CPMS: ("ME","MT","SM","SR"),("ME","MT","SM","SR"),("ME","MT","SM","SR")
OK
2011-01-27 15:10:15,7, GSM1: # Phonebook storage, available mem's:
2011-01-27 15:10:15,7, GSM1: -> AT+CPBS=?
2011-01-27 15:10:15,7, GSM1: <- +CPBS: ("SM","EN","ON")
OK
2011-01-27 15:10:15,7, GSM1: # List messages, list of supported stat's:
2011-01-27 15:10:15,7, GSM1: -> AT+CMGL=?
2011-01-27 15:10:16,7, GSM1: <- +CMGL: (0-4)
OK
2011-01-27 15:10:16,7, GSM1: # Delete message, list of supported values:
2011-01-27 15:10:16,7, GSM1: -> AT+CMGD=?
2011-01-27 15:10:16,7, GSM1: <- +CMGD: (),(0-4)
OK
2011-01-27 15:10:16,7, GSM1: # Phone activity status, list of supported stat's:
2011-01-27 15:10:16,7, GSM1: -> AT+CPAS=?
2011-01-27 15:10:17,7, GSM1: <- +CPAS: (0,3,4)
OK
2011-01-27 15:10:17,7, GSM1: # TE character set, list of supported charset's:
2011-01-27 15:10:17,7, GSM1: -> AT+CSCS=?
2011-01-27 15:10:17,7, GSM1: <- +CSCS: ("IRA","GSM","UCS2")
OK
2011-01-27 15:10:17,7, GSM1: # TE character set, current setting:
2011-01-27 15:10:17,7, GSM1: -> AT+CSCS?
2011-01-27 15:10:18,7, GSM1: <- +CSCS: "IRA"
OK
2011-01-27 15:10:18,7, GSM1: ## End of device details
2011-01-27 15:10:18,5, GSM1: Waiting for messages to send...
2011-01-27 15:12:09,5, smsd: Moved file /var/spool/sms/outgoing/send_vAcbMB to /var/spool/sms/checked
2011-01-27 15:12:09,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/send_vAcbMB
2011-01-27 15:12:09,6, GSM1: Sending SMS from to 491xxxxx
2011-01-27 15:12:09,6, GSM1: Checking if modem is ready
2011-01-27 15:12:09,7, GSM1: -> AT
2011-01-27 15:12:09,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:09,7, GSM1: <- OK
2011-01-27 15:12:09,6, GSM1: Pre-initializing modem
2011-01-27 15:12:09,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-01-27 15:12:09,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:10,7, GSM1: <- OK
2011-01-27 15:12:10,6, GSM1: Checking if modem needs PIN
2011-01-27 15:12:10,7, GSM1: -> AT+CPIN?
2011-01-27 15:12:10,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:10,7, GSM1: <- +CPIN: READY OK
2011-01-27 15:12:10,7, GSM1: -> AT+CSQ
2011-01-27 15:12:10,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:11,7, GSM1: <- +CSQ: 6,99 OK
2011-01-27 15:12:11,6, GSM1: Signal Strength Indicator: (6,99) -101 dBm (Marginal)
2011-01-27 15:12:11,6, GSM1: Selecting PDU mode
2011-01-27 15:12:11,7, GSM1: -> AT+CMGF=0
2011-01-27 15:12:11,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:11,7, GSM1: <- OK
2011-01-27 15:12:11,7, GSM1: -> AT+CMGS=17
2011-01-27 15:12:11,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:12,7, GSM1: <- >
2011-01-27 15:12:12,7, GSM1: -> 0011000C919471630213020000FF03627618
2011-01-27 15:12:12,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:37,7, GSM1: <- +CMS ERROR: 500 (Unknown error)
2011-01-27 15:12:37,3, GSM1: The modem answer was not OK: +CMS ERROR: 500 (Unknown error)
2011-01-27 15:12:37,5, GSM1: Waiting 10 sec. before retrying
2011-01-27 15:12:47,6, GSM1: Checking if modem is ready
2011-01-27 15:12:47,7, GSM1: -> AT
2011-01-27 15:12:47,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:48,7, GSM1: <- OK
2011-01-27 15:12:48,6, GSM1: Pre-initializing modem
2011-01-27 15:12:48,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-01-27 15:12:48,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:48,7, GSM1: <- OK
2011-01-27 15:12:48,6, GSM1: Checking if modem needs PIN
2011-01-27 15:12:48,7, GSM1: -> AT+CPIN?
2011-01-27 15:12:48,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:49,7, GSM1: <- +CPIN: READY OK
2011-01-27 15:12:49,7, GSM1: -> AT+CSQ
2011-01-27 15:12:49,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:49,7, GSM1: <- +CSQ: 6,99 OK
2011-01-27 15:12:49,6, GSM1: Signal Strength Indicator: (6,99) -101 dBm (Marginal)
2011-01-27 15:12:49,6, GSM1: Selecting PDU mode
2011-01-27 15:12:49,7, GSM1: -> AT+CMGF=0
2011-01-27 15:12:49,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:50,7, GSM1: <- OK
2011-01-27 15:12:50,7, GSM1: -> AT+CMGS=17
2011-01-27 15:12:50,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:12:50,7, GSM1: <- >
2011-01-27 15:12:50,7, GSM1: -> 0011000C919471630213020000FF03627618
2011-01-27 15:12:50,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:13:16,7, GSM1: <- +CMS ERROR: 500 (Unknown error)
2011-01-27 15:13:16,3, GSM1: The modem answer was not OK: +CMS ERROR: 500 (Unknown error)
2011-01-27 15:13:16,5, GSM1: Waiting 10 sec. before retrying
2011-01-27 15:13:26,6, GSM1: Checking if modem is ready
2011-01-27 15:13:26,7, GSM1: -> AT
2011-01-27 15:13:26,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:13:26,7, GSM1: <- OK
2011-01-27 15:13:26,6, GSM1: Pre-initializing modem
2011-01-27 15:13:26,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-01-27 15:13:26,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:13:27,7, GSM1: <- OK
2011-01-27 15:13:27,6, GSM1: Checking if modem needs PIN
2011-01-27 15:13:27,7, GSM1: -> AT+CPIN?
2011-01-27 15:13:27,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:13:27,7, GSM1: <- +CPIN: READY OK
2011-01-27 15:13:27,7, GSM1: -> AT+CSQ
2011-01-27 15:13:27,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:13:28,7, GSM1: <- +CSQ: 6,99 OK
2011-01-27 15:13:28,6, GSM1: Signal Strength Indicator: (6,99) -101 dBm (Marginal)
2011-01-27 15:13:28,6, GSM1: Selecting PDU mode
2011-01-27 15:13:28,7, GSM1: -> AT+CMGF=0
2011-01-27 15:13:28,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:13:28,7, GSM1: <- OK
2011-01-27 15:13:28,7, GSM1: -> AT+CMGS=17
2011-01-27 15:13:28,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:13:29,7, GSM1: <- >
2011-01-27 15:13:29,7, GSM1: -> 0011000C919471630213020000FF03627618
2011-01-27 15:13:29,7, GSM1: Command is sent, waiting for the answer
2011-01-27 15:13:54,7, GSM1: <- +CMS ERROR: 500 (Unknown error)
2011-01-27 15:13:54,3, GSM1: The modem answer was not OK: +CMS ERROR: 500 (Unknown error)
2011-01-27 15:13:54,4, GSM1: Sending SMS to 49xxxxx failed, trying time 105 sec. Retries: 2.
2011-01-27 15:13:54,6, GSM1: Deleted file /var/spool/sms/checked/send_vAcbMB
what does the following log entry mean?
GSM1: Unexpected input: ^BOOT:35954679,0,0,0,75
is something missing in my config?
let's aks google...
|
|
Thu Jan 27, 2011 09:44
|
obelix: Could the following be the error:
Signal Strength Indicator: (18,99) -77 dBm (Good), Bit Error Rate: not known or not detectable
I will ask google for the 20th time on this matter...
|
|
Wed Jan 26, 2011 15:08
|
obelix: Operating system name and version: Ubuntu 10.10
Version of smsd: 3.1.14
Smsd installed from: sources
Name and model of a modem / phone: Medion S4011 (Aldi talk)
Interface: USB
hey folks,
first of all: thx for developing smstools3 it is a rly nice tool!
i have some trouble with my medion S4011. it worked fine last week right after installing smstools.
now it seems that the modem couldn't connect. i tried a different sim card from another carrier but it didn't help. the led is blinking though.
what really scares me, is that an umts connection works.
edit:
log:
2011-01-26 15:46:13,2, smsd: Smsd v3.1.14 started.
2011-01-26 15:46:13,2, smsd: Running as root:root.
2011-01-26 15:46:13,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.fBMNzt /tmp/smsd_data.B9iS6u
2011-01-26 15:46:13,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2011-01-26 15:46:13,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2011-01-26 15:46:13,5, smsd: Outgoing file checker has started. PID: 8627.
2011-01-26 15:46:13,5, GSM1: Modem handler 0 has started. PID: 8629.
2011-01-26 15:46:13,7, smsd: All PID's: 8627,8629
2011-01-26 15:46:13,5, GSM1: Using check_memory_method 1: CPMS is used.
2011-01-26 15:46:13,6, GSM1: Checking device for incoming SMS
2011-01-26 15:46:13,6, GSM1: Checking if modem is ready
2011-01-26 15:46:13,7, GSM1: -> AT
2011-01-26 15:46:13,7, GSM1: Command is sent, waiting for the answer
2011-01-26 15:46:13,7, GSM1: <- OK
2011-01-26 15:46:13,6, GSM1: Pre-initializing modem
2011-01-26 15:46:14,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-01-26 15:46:14,7, GSM1: Command is sent, waiting for the answer
2011-01-26 15:46:14,7, GSM1: <- +CME ERROR: 11 (SIM PIN required)
2011-01-26 15:46:14,3, GSM1: Modem did not accept the pre-init string
2011-01-26 15:46:14,6, GSM1: Checking if modem needs PIN
2011-01-26 15:46:14,7, GSM1: -> AT+CPIN?
2011-01-26 15:46:14,7, GSM1: Command is sent, waiting for the answer
2011-01-26 15:46:14,7, GSM1: <- +CPIN: SIM PIN OK
2011-01-26 15:46:14,5, GSM1: Modem needs PIN, entering PIN...
2011-01-26 15:46:15,7, GSM1: -> AT+CPIN="8535"
2011-01-26 15:46:15,7, GSM1: Command is sent, waiting for the answer
2011-01-26 15:46:15,7, GSM1: <- OK
2011-01-26 15:46:15,7, GSM1: -> AT+CPIN?
2011-01-26 15:46:15,7, GSM1: Command is sent, waiting for the answer
2011-01-26 15:46:15,7, GSM1: <- +CPIN: READY OK
2011-01-26 15:46:15,6, GSM1: PIN Ready
2011-01-26 15:46:16,7, GSM1: -> AT+CSQ
2011-01-26 15:46:16,7, GSM1: Command is sent, waiting for the answer
2011-01-26 15:46:16,7, GSM1: <- +CSQ: 18,99 OK
2011-01-26 15:46:16,6, GSM1: Signal Strength Indicator: (18,99) -77 dBm (Good), Bit Error Rate: not known or not detectable
2011-01-26 15:46:16,6, GSM1: Checking if Modem is registered to the network
2011-01-26 15:46:16,7, GSM1: -> AT+CREG?
2011-01-26 15:46:16,7, GSM1: Command is sent, waiting for the answer
2011-01-26 15:46:16,7, GSM1: <- +CREG: 0,2 OK
2011-01-26 15:46:16,5, GSM1: MODEM IS NOT REGISTERED, WAITING 1 SEC. BEFORE RETRYING 1. TIME
2011-01-26 15:46:18,7, GSM1: -> AT+CSQ
2011-01-26 15:46:18,7, GSM1: Command is sent, waiting for the answer
2011-01-26 15:46:18,7, GSM1: <- +CSQ: 18,99 OK
2011-01-26 15:46:18,5, GSM1: Signal Strength Indicator: (18,99) -77 dBm (Good), Bit Error Rate: not known or not detectable
2011-01-26 15:46:18,7, GSM1: -> AT+CREG?
2011-01-26 15:46:18,7, GSM1: Command is sent, waiting for the answer
2011-01-26 15:46:18,7, GSM1: <- +CREG: 0,2 OK
2011-01-26 15:46:18,5, GSM1: MODEM IS NOT REGISTERED, WAITING 1 SEC. BEFORE RETRYING 2. TIME
2011-01-26 15:46:20,7, GSM1: -> AT+CSQ
2011-01-26 15:46:20,7, GSM1: Command is sent, waiting for the answer
2011-01-26 15:46:20,7, GSM1: <- +CSQ: 0,99 OK
2011-01-26 15:46:20,5, GSM1: Signal Strength Indicator: (0,99) -113 dBm (Marginal) or less, Bit Error Rate: not known or not detectable
2011-01-26 15:46:20,7, GSM1: -> AT+CREG?
2011-01-26 15:46:20,7, GSM1: Command is sent, waiting for the answer
conf:
# Example smsd.conf. Read the manual for a description
devices = GSM1
logfile = /var/log/smsd.log
loglevel = 7
[GSM1]
device = /dev/ttyUSB1
incoming = yes
pin = xxxx
do you have any ideas what i can try or change to get it up running? thx in advance!!!
|
Page: 1
Time in this board is UTC.
|
|
|
 |
|
|
 |
|
