|
|
ajpugliese: here is my smsd.conf
---------------------------------
devices = GSM1
logfile = /var/log/smsd.log
loglevel = 7
outgoing = /var/spool/sms/outgoing
incoming = /var/spool/sms/incoming
checked = /var/spool/sms/checked
[GSM1]
device = /dev/tty/ACM0
# send_handshake_select=no
incoming =no
#pin = 1111
send_delay=6
|
ajpugliese: I get the following message:
GSM1: Couldn't open serial port /dev/tty/ACM0, error: Not a directory, waiting 30 sec.
I understand that I cannot expect incoming messages using the e71x but though I could at lease send messages.
Any advice will be greatly appreciated. I included output from log, dmesg and lsusb.
Tony Pugliese
OS: Linux Debian 6.0 (Squeeze)
smsd: v3.1.14 installed using apt-get
phone: Nokia e71x
Interface: usb "PC Suite" selected on phone
output from /var/log/smsd.log:
--------------------------------------------
2012-05-07 07:55:53,2, smsd: Smsd mainprocess is awaiting the termination of all modem handlers. PID: 8154.
2012-05-07 07:55:53,2, smsd: Smsd mainprocess terminated. PID 8154, was started 12-05-07 07:55:07.
2012-05-07 07:55:54,2, smsd: Smsd v3.1.14 started.
2012-05-07 07:55:54,2, smsd: Running as root:root.
2012-05-07 07:55:54,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.RuqNwE /tmp/smsd_data.4ESth8
2012-05-07 07:55:54,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2012-05-07 07:55:54,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2012-05-07 07:55:54,5, smsd: Outgoing file checker has started. PID: 8226.
2012-05-07 07:55:54,5, GSM1: Modem handler 0 has started. PID: 8228. Will only send messages.
2012-05-07 07:55:54,7, smsd: All PID's: 8226,8228
2012-05-07 07:55:54,3, GSM1: Couldn't open serial port /dev/tty/ACM0, error: Not a directory, waiting 30 sec.
output from dmesg:
----------------------------
[79365.272024] usb 4-2: new full speed USB device using uhci_hcd and address 16
[79365.450096] usb 4-2: New USB device found, idVendor=0421, idProduct=01a2
[79365.450105] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[79365.450111] usb 4-2: Product: E71x
[79365.450116] usb 4-2: Manufacturer: Nokia
[79365.450120] usb 4-2: SerialNumber: 356875021505354
[79365.450322] usb 4-2: configuration #1 chosen from 1 choice
[79365.458213] cdc_acm 4-2:1.0: ttyACM0: USB ACM device
[79365.464188] usb 4-2: bad CDC descriptors
[79365.464317] usb 4-2: bad CDC descriptors
[82302.953583] [drm] Big FIFO is enabled
[86209.504059] [drm] Big FIFO is enabled
[86517.944061] usb 4-2: USB disconnect, address 16
output from lsusb:
---------------------------
Bus 005 Device 002: ID 04d9:1400 Holtek Semiconductor, Inc. PS/2 keyboard + mouse controller
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 017: ID 0421:01a2 Nokia Mobile Phones
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
|
