Operating system name and version: OpenBSD current (5.3)
Version of smsd: smstools3-3.1.15
Smsd installed from: package
Name and model of a modem / phone: Ericson K320i
Interface: USB

Hello,

All is in the title, i can send but not retreive SMS. I know that this phone is not in the support hardware list but if someone have
some success with this phone..

I can give you more detail.

This is my conf file :

devices = GSM1
#devices = GSM1, GSM2
loglevel = 7
logfile = 1
date_filename = 1
user = _smsd
pidfile = /var/run/smsd/smsd.pid
logfile = /var/log/smsd/smsd.log

[GSM1]
report_device_details = yes
device = /dev/cuaU0
incoming = yes
send_delay = 20


This is my log output :

2013-03-13 23:55:12,6, GSM1: Checking device for incoming SMS
2013-03-13 23:55:12,6, GSM1: Checking if modem is ready
2013-03-13 23:55:12,7, GSM1: -> AT
2013-03-13 23:55:12,7, GSM1: Command is sent, waiting for the answer
2013-03-13 23:55:12,7, GSM1: <- OK
2013-03-13 23:55:12,6, GSM1: Pre-initializing modem
2013-03-13 23:55:12,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2013-03-13 23:55:13,7, GSM1: Command is sent, waiting for the answer
2013-03-13 23:55:13,7, GSM1: <- OK
2013-03-13 23:55:14,7, GSM1: -> AT+CSQ
2013-03-13 23:55:14,7, GSM1: Command is sent, waiting for the answer
2013-03-13 23:55:14,7, GSM1: <- +CSQ: 21,99 OK
2013-03-13 23:55:14,6, GSM1: Signal Strength Indicator: (21,99) -71 dBm (Excellent), Bit Error Rate: not known or not detectable
2013-03-13 23:55:14,6, GSM1: Checking if Modem is registered to the network
2013-03-13 23:55:14,7, GSM1: -> AT+CREG?
2013-03-13 23:55:15,7, GSM1: Command is sent, waiting for the answer
2013-03-13 23:55:15,7, GSM1: <- +CREG: 2,1,"0052","00003BEC" OK
2013-03-13 23:55:15,6, GSM1: Modem is registered to the network
2013-03-13 23:55:15,6, GSM1: Selecting PDU mode
2013-03-13 23:55:15,7, GSM1: -> AT+CMGF=0
2013-03-13 23:55:16,7, GSM1: Command is sent, waiting for the answer
2013-03-13 23:55:16,7, GSM1: <- OK
2013-03-13 23:55:16,6, GSM1: Checking memory size
2013-03-13 23:55:16,7, GSM1: -> AT+CPMS?
2013-03-13 23:55:16,7, GSM1: Command is sent, waiting for the answer
2013-03-13 23:55:17,7, GSM1: <- +CPMS: "SM",0,50,"SM",0,50,"ME",16,200 OK
2013-03-13 23:55:17,6, GSM1: Used memory is 0 of 50
2013-03-13 23:55:17,6, GSM1: No SMS received

Thank's for your help.

rhino

Try this setting:

[GSM1]
init = AT+CPMS="ME","ME","ME"


If receiving works, try if sending still works.

Hooo great !!!

It's works send /receive SMS.

So you can add ericsson K320i to your hardware list.

Thank's keke