Hello, I have configured smsd and my server is sending sms. But I am getting every sms 3 times. Below is the log file. IT is appear that service trying to send sms and it is trying three times, I am getting the sms but service thinking sms sending is failed. can any one help?

2014-07-19 10:52:35,6, smsd: File mode creation mask: 022 (0644, rw-r--r--). 2014-07-19 10:52:35,6, GSM1: Modem handler 0 has started. Will only send messages. 2014-07-19 10:52:35,6, smsd: outgoing file checker has started. 2014-07-19 10:52:46,6, smsd: Moved file /var/spool/sms/outgoing/send_S27623 to /var/spool/sms/checked 2014-07-19 10:52:56,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/send_S27623 2014-07-19 10:52:56,6, GSM1: Sending SMS from to 8801678004595 2014-07-19 10:52:56,6, GSM1: Checking if modem is ready 2014-07-19 10:52:56,7, GSM1: -> AT 2014-07-19 10:52:56,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:52:57,7, GSM1: <- OK 2014-07-19 10:52:57,6, GSM1: Pre-initializing modem 2014-07-19 10:52:57,7, GSM1: -> ATE0+CMEE=1 2014-07-19 10:52:57,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:52:57,7, GSM1: <- OK 2014-07-19 10:52:57,6, GSM1: Initializing modem 2014-07-19 10:52:57,7, GSM1: -> AT+CSQ 2014-07-19 10:52:57,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:52:57,7, GSM1: <- +CSQ: 16,99 OK 2014-07-19 10:52:57,6, GSM1: Checking if Modem is registered to the network 2014-07-19 10:52:57,7, GSM1: -> AT+CREG? 2014-07-19 10:52:57,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:52:57,7, GSM1: <- +CREG: 0,1 OK 2014-07-19 10:52:57,6, GSM1: Modem is registered to the network 2014-07-19 10:52:57,6, GSM1: Selecting PDU mode 2014-07-19 10:52:57,7, GSM1: -> AT+CMGF=0 2014-07-19 10:52:57,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:52:57,7, GSM1: <- OK 2014-07-19 10:52:57,6, GSM1: Querying IMSI 2014-07-19 10:52:57,7, GSM1: -> AT+CIMI 2014-07-19 10:52:57,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:52:58,7, GSM1: <- 470072650088914 OK 2014-07-19 10:52:58,6, GSM1: IMSI: 470072650088914 2014-07-19 10:52:58,7, GSM1: -> AT+CMGS=18 2014-07-19 10:52:58,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:52:58,7, GSM1: <- > 2014-07-19 10:52:58,7, GSM1: -> 0011000D91881076084095F50000FF03363A1A 2014-07-19 10:52:58,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:53:28,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 2014-07-19 10:53:28,7, GSM1: <- 2014-07-19 10:53:28,3, GSM1: The modem said ERROR or did not answer. 2014-07-19 10:53:28,5, GSM1: Waiting 10 sec. before retrying 2014-07-19 10:53:38,6, GSM1: Checking if modem is ready 2014-07-19 10:53:38,7, GSM1: -> AT 2014-07-19 10:53:38,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:53:39,7, GSM1: <- OK 2014-07-19 10:53:39,6, GSM1: Pre-initializing modem 2014-07-19 10:53:39,7, GSM1: -> ATE0+CMEE=1 2014-07-19 10:53:39,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:53:39,7, GSM1: <- OK 2014-07-19 10:53:39,6, GSM1: Initializing modem 2014-07-19 10:53:39,7, GSM1: -> AT+CSQ 2014-07-19 10:53:39,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:53:39,7, GSM1: <- +CSQ: 16,99 OK 2014-07-19 10:53:39,6, GSM1: Checking if Modem is registered to the network 2014-07-19 10:53:39,7, GSM1: -> AT+CREG? 2014-07-19 10:53:39,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:53:39,7, GSM1: <- +CREG: 0,1 OK 2014-07-19 10:53:39,6, GSM1: Modem is registered to the network 2014-07-19 10:53:39,6, GSM1: Selecting PDU mode 2014-07-19 10:53:39,7, GSM1: -> AT+CMGF=0 2014-07-19 10:53:39,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:53:39,7, GSM1: <- OK 2014-07-19 10:53:39,7, GSM1: -> AT+CMGS=18 2014-07-19 10:53:39,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:53:40,7, GSM1: <- > 2014-07-19 10:53:40,7, GSM1: -> 0011000D91881076084095F50000FF03363A1A 2014-07-19 10:53:40,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:54:10,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 2014-07-19 10:54:10,7, GSM1: <- 2014-07-19 10:54:10,3, GSM1: The modem said ERROR or did not answer. 2014-07-19 10:54:10,5, GSM1: Waiting 10 sec. before retrying 2014-07-19 10:54:20,6, GSM1: Checking if modem is ready 2014-07-19 10:54:20,7, GSM1: -> AT 2014-07-19 10:54:20,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:54:20,7, GSM1: <- OK 2014-07-19 10:54:20,6, GSM1: Pre-initializing modem 2014-07-19 10:54:20,7, GSM1: -> ATE0+CMEE=1 2014-07-19 10:54:20,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:54:21,7, GSM1: <- OK 2014-07-19 10:54:21,6, GSM1: Initializing modem 2014-07-19 10:54:21,7, GSM1: -> AT+CSQ 2014-07-19 10:54:21,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:54:21,7, GSM1: <- +CSQ: 16,99 OK 2014-07-19 10:54:21,6, GSM1: Checking if Modem is registered to the network 2014-07-19 10:54:21,7, GSM1: -> AT+CREG? 2014-07-19 10:54:21,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:54:21,7, GSM1: <- +CREG: 0,1 OK 2014-07-19 10:54:21,6, GSM1: Modem is registered to the network 2014-07-19 10:54:21,6, GSM1: Selecting PDU mode 2014-07-19 10:54:21,7, GSM1: -> AT+CMGF=0 2014-07-19 10:54:21,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:54:21,7, GSM1: <- OK 2014-07-19 10:54:21,7, GSM1: -> AT+CMGS=18 2014-07-19 10:54:21,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:54:22,7, GSM1: <- > 2014-07-19 10:54:22,7, GSM1: -> 0011000D91881076084095F50000FF03363A1A 2014-07-19 10:54:22,7, GSM1: Command is sent, waiting for the answer 2014-07-19 10:54:52,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 2014-07-19 10:54:52,7, GSM1: <- 2014-07-19 10:54:52,3, GSM1: The modem said ERROR or did not answer. 2014-07-19 10:54:52,4, GSM1: Sending SMS to 8801678004595 failed 2014-07-19 10:54:52,6, GSM1: Deleted file /var/spool/sms/checked/send_S27623

is there any option to stop retrying?

I have found on my otehr server that this keep retrying. Is there any option not to retry sending sms?