Version of smsd: Version 3.1.14
Smsd installed from: package repository
Name and model of a modem / phone: UMTS-USB-Stick XS Stick W14
Interface: USB
Hello @all,
I have a problem reciving sms by using smstools.
There is no error sending sms - this part works perfect.
Here is the conf-file:
devices = GSM1
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
incoming = /var/spool/sms/incoming
logfile = /var/log/smstools/smsd.log
infofile = /var/run/smstools/smsd.working
pidfile = /var/run/smstools/smsd.pid
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
stats = /var/log/smstools/smsd_stats
loglevel = 8
receive_before_send = no
autosplit = 3
[GSM1]
# //ORIGINAL init = ATE0+CPMS="SM"+CNMI=2,0,0,2,1 <- I tried several times
# init = AT+CPMS="ME","ME","ME" <- I tried this too
init = AT
device = /dev/ttyUSB3
incoming = yes
# pin = 1111
# baudrate = 19200
report = yes
memory_start = 0
check_memory_method = 31
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
incoming = /var/spool/sms/incoming
logfile = /var/log/smstools/smsd.log
infofile = /var/run/smstools/smsd.working
pidfile = /var/run/smstools/smsd.pid
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
stats = /var/log/smstools/smsd_stats
loglevel = 8
receive_before_send = no
autosplit = 3
[GSM1]
# //ORIGINAL init = ATE0+CPMS="SM"+CNMI=2,0,0,2,1 <- I tried several times
# init = AT+CPMS="ME","ME","ME" <- I tried this too
init = AT
device = /dev/ttyUSB3
incoming = yes
# pin = 1111
# baudrate = 19200
report = yes
memory_start = 0
check_memory_method = 31
'smsdconf' Syntax Highlight powered by GeSHi
The log-file says allways:
If anyone has an idea please give me a hint
thx
ulf5