I use ubuntu 14:04 LTS version in my system and use latest smstools version
and using the 32 port modem for sms

how to settings port 1 to port 8 to the provider 1 and then port 9 to port 16 to the provider 2 and port 17 to port 24 to the provider 3 and port 25 to port 32 to provider 4.

sorry for my english leanguage

thanks

You need to configure providers and queues. It is explained on this page: Configuring Providers.

For more information I need to know what is the manufacturer and model of your 32 port modem. If it provides individual port for each modem, it likely can be used, but if it's using some multiplexer or something else, it probably is not compatible with smstools.

thanks keke

setting for the modem has been resolved, and it can run smoothly

The following modem settings I use :

devices=GSM01,GSM02,GSM03,GSM04,GSM05,GSM06,GSM07,GSM08,GSM10,GSM11,GSM12,GSM13,GSM14,GSM15,GSM16,GSM17,GSM18,GSM19,GSM20,GSM21,GSM22,GSM23,GSM24,GSM25,GSM26,GSM27,GSM28,GSM29,GSM30,GSM31,GSM32

[queues]
P01 = /var/spool/sms/prov01
P02 = /var/spool/sms/prov02
P03 = /var/spool/sms/prov03

[provider]
prov01 = 0,1,2
prov02 = 3,4,5
indosat = 6,7,8,9

[GSM01]
device = /dev/ttyUSB0
queues = prov01
baudrate = 115200
incoming = yes
check_network=0
mode = new
smsc = +7777777777777777
rtscts = yes
cs_convert = yes
init = AT+CNMI=1,0,0,1,0
report = yes
using_routed_status_report = yes
memory_start = 1
send_delay = 10

[GSM02]
device = /dev/ttyUSB1
queues = prov01
baudrate = 115200
incoming = yes
smsc = +77777777777777777
check_network=0
mode = new
rtscts = yes
cs_convert = yes
init = AT+CNMI=1,0,0,1,0
report = yes
using_routed_status_report = yes
memory_start = 1
send_delay = 10

...
...
etc
...
...

[GSM15]
device = /dev/ttyUSB14
queues = prov02
baudrate = 115200
incoming = yes
smsc = +8888888888888888
check_network=0
mode = new
rtscts = yes
cs_convert = yes
init = AT+CNMI=1,0,0,1,0
report = yes
using_routed_status_report = yes
memory_start = 1
send_delay = 10

[GSM16]
device = /dev/ttyUSB15
queues = prov02
baudrate = 115200
incoming = yes
smsc = +88888888888888
check_network=0
mode = new
rtscts = yes
cs_convert = yes
init = AT+CNMI=1,0,0,1,0
report = yes
using_routed_status_report = yes
memory_start = 1
send_delay = 10

....
...
etc
...
...

[GSM31]
device = /dev/ttyUSB30
queues = prov03
baudrate = 115200
incoming = yes
smsc = +99999999999999
check_network=0
mode = new
rtscts = yes
cs_convert = yes
init = AT+CNMI=1,0,0,1,0
report = yes
using_routed_status_report = yes
memory_start = 1
send_delay = 10

[GSM32]
device = /dev/ttyUSB31
queues = prov03
baudrate = 115200
incoming = yes
smsc = +99999999999999
check_network=0
mode = new
rtscts = yes
cs_convert = yes
init = AT+CNMI=1,0,0,1,0
report = yes
using_routed_status_report = yes
memory_start = 1
send_delay = 10

I use a modem that modem wavecom Q2406B 32 port

Thank you very much