SMS Server Tools 3
This site is hosted by Kekekasvi.com
 Menu
Basic information:
Additional information:
Support:
Get SMS Server Tools 3:
Additional Options

 Sponsored links

 Search
Custom Search

 Visitor locations
 
 SMS Server Tools 3 Community
Welcome, Guest. Please login or register. Fri Sep 22, 2017 11:37
SMSTools3 Community » Bug reports Bottom

[solved] SMSTools not receiving

Login and Post Reply

Page:  1

Author Post
Member
Registered:
May 2017
Location: Bucharest, Romania
/var/log/smstools/smsd.log


/etc/smsd.conf


/var/spool/sms $ while true; do clear; tree; sleep 1; done


I am not able to recieve SMS, what am i doing wrong?

Thank you,
Cezar


« Last edit by sarbull on Mon May 22, 2017 13:16, 4 months ago. »
Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
Try with init = AT+CPMS="SM". If it does not help, use a modem setting report_device_details = yes and show those details here.

Member
Registered:
May 2017
Location: Bucharest, Romania
Topic owner


Still not working, thanks for the quick reply.

Best regards,
Cezar

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
Are sure that there should be a message received in the modem?

As your modem is Huawei, you could use the following settings:

[GSM1]
init = AT+CPMS="SM";+CNMI=2,0,0,2,1
init2 = AT^CURC=0
memory_start = 0
ussd_convert = 2
signal_quality_ber_ignore = yes
 
'smsdconf' Syntax Highlight powered by GeSHi


Please check what ports are provided by the modem ( ls -l /dev/serial/by-id/ ). If there are three ports, try to use the last one, for example device = /dev/ttyUSB2. Try to send a message to SIM's own number.

Member
Registered:
May 2017
Location: Bucharest, Romania
Topic owner
/etc/smsd.conf


/var/log/smstools/smsd.log


Still not working, i'm getting this... I'm sensing that this modem is "programmed" wrong.

Best regards,
Cezar

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
Was there /dev/ttyUSB2 and did you try it?

As the modem did not accept AT^CURC=0, perhaps the firmware is bad. You need to comment out init2 setting.

Have you tried to send SMS? If not, you should try to send SMS to it's own number, to see how sending works.

Member
Registered:
May 2017
Location: Bucharest, Romania
Topic owner
Quote
Was there /dev/ttyUSB2 and did you try it?

Yes, i tried all ports..

Quote
As the modem did not accept AT^CURC=0, perhaps the firmware is bad. You need to comment out init2 setting.

I also tried this, but with no success

Quote
Have you tried to send SMS? If not, you should try to send SMS to it's own number, to see how sending works.

Sending SMSs works fine, i also tried sending an SMS to it's own number but with no success on receiving it.

I will buy another modem. Thank you so much for your answers.

Best regards,
Cezar

Member
Registered:
May 2017
Location: Bucharest, Romania
Topic owner
I bought a new 100% original Huawei E1750 and it worked. Lesson learned again.

Thank you @keke for your answers!

Login and Post Reply

Page:  1

SMSTools3 Community » Bug reports Top

 
Time in this board is UTC.  

Privacy Policy   SMS Server Tools 3 Copyright © Keijo Kasvi.