Hello, could You advise couple of cheap GSM phones with traditional micro-USB port to send SMS with smstools?
Does somebody have experience with Nokia 105 SS + smstools ?

Thank You.

I do not know about Nokia 105 SS, or currently about any phone.

In couple of systems I use these USB sticks: https://www.fasttech.com/products/0/10008211/2409900-huawei-e353-21mbps-3g-umts-hspa-hsdpa-usb-surf

These are cheap and have been working very well. These are also fast. Please check if these are suitable for you.

Yes, it works fine with USB-sticks , I have practical experience with 8 farms @ Debian 8 (with 63 modems on each farm), but now the purpose is changed - need to change modem to mobile phone.

Right now I'm trying to ride a Nokia 105 (idVendor=0421, idProduct=069a) , AFAIU it is finnish-chinese collaboration product based on a Mediatek chip. Still can't catch REPORT events from it and suddenly phone stopped to send messages, saying:
2018-01-13 18:40:07,7, GSM1: -> 0031000B9{...some text skipped....}00B 2018-01-13 18:40:07,7, GSM1: Command is sent, waiting for the answer. (60) 2018-01-13 18:40:10,7, GSM1: <- +CME ERROR: 21 (Invalid index) 2018-01-13 18:40:10,3, GSM1: The modem answer was not OK: +CME ERROR: 21 (Invalid index



could You advise what can be a reason of CME ERROR 21 ? AFAIR i met it on Huawei modems but it was couple years ago and I don't remember how did I cure it %) Could it be caused by text to binary traslation or it is device memory handling error?

self-reply:
everything is simple, CME ERROR 21 means operator's SMS reject because of no money on balance.
I suggest to place it into FAQ

But the delivery report still do not come. Could You point me where i am wrong?

smsd.conf:


1.sms:
To: 79042144111 Report:yes Hi Friends.

Please use the modem setting report_device_details = yes, restart smsd and show those details from the log.

Do you have a manual of AT commands for this device?

Quote

Please use the modem setting report_device_details = yes, restart smsd and show those details from the log.

Found couple of errors:
2018-01-13 19:59:29,7, GSM1: # New message indications, list of supported modes: 2018-01-13 19:59:29,7, GSM1: -> AT+CNMI=? 2018-01-13 19:59:29,7, GSM1: <- ERROR 2018-01-13 19:59:29,7, GSM1: # New message indications, current settings: 2018-01-13 19:59:29,7, GSM1: -> AT+CNMI? 2018-01-13 19:59:29,7, GSM1: <- ERROR

Quote

Do you have a manual of AT commands for this device?

Found it just day ago, I'll try to find answer there? thank You

I would like to see all details.

is this enough?
# tail -f /var/log/smsd.log 2018-01-13 20:23:17,7, GSM1: -> AT+CGMR 2018-01-13 20:23:17,7, GSM1: <- +CGMR: N103.10.02.11.p1, 2017/05/13 16:42 OK 2018-01-13 20:23:17,7, GSM1: # New message indications, list of supported modes: 2018-01-13 20:23:17,7, GSM1: -> AT+CNMI=? 2018-01-13 20:23:17,7, GSM1: <- ERROR 2018-01-13 20:23:17,7, GSM1: # New message indications, current settings: 2018-01-13 20:23:17,7, GSM1: -> AT+CNMI? 2018-01-13 20:23:18,7, GSM1: <- ERROR 2018-01-13 20:23:18,7, GSM1: # Preferred message storage, list of supported mem's: 2018-01-13 20:23:18,7, GSM1: -> AT+CPMS=? 2018-01-13 20:23:18,7, GSM1: <- +CPMS: ("SM", "ME", "SM_P", "ME_P", "MT"), ("SM", "ME", "SM_P", "ME_P", "MT"), ("SM", "ME", "SM_P", "ME_P", "MT") OK 2018-01-13 20:23:18,7, GSM1: # Phonebook storage, available mem's: 2018-01-13 20:23:18,7, GSM1: -> AT+CPBS=? 2018-01-13 20:23:18,7, GSM1: <- +CPBS: ("ME","SM","LD","MC","RC","FD","DC","ON") OK 2018-01-13 20:23:18,7, GSM1: # List messages, list of supported stat's: 2018-01-13 20:23:18,7, GSM1: -> AT+CMGL=? 2018-01-13 20:23:18,7, GSM1: <- ERROR 2018-01-13 20:23:18,7, GSM1: # Delete message, list of supported values: 2018-01-13 20:23:18,7, GSM1: -> AT+CMGD=? 2018-01-13 20:23:18,7, GSM1: <- +CMGD: (1-30), (0-4) OK 2018-01-13 20:23:18,7, GSM1: # Phone activity status, list of supported stat's: 2018-01-13 20:23:18,7, GSM1: -> AT+CPAS=? 2018-01-13 20:23:18,7, GSM1: <- ERROR 2018-01-13 20:23:18,7, GSM1: # TE character set, list of supported charset's: 2018-01-13 20:23:18,7, GSM1: -> AT+CSCS=? 2018-01-13 20:23:18,7, GSM1: <- +CSCS: ("IRA", "GSM", "HEX", "PCCP437", "8859-1", "UCS2", "UCS2_0X81") OK 2018-01-13 20:23:18,7, GSM1: # TE character set, current setting: 2018-01-13 20:23:18,7, GSM1: -> AT+CSCS? 2018-01-13 20:23:18,7, GSM1: <- +CSCS: "IRA" OK 2018-01-13 20:23:18,7, GSM1: ## End of device details 2018-01-13 20:23:18,6, GSM1: Checking memory size 2018-01-13 20:23:18,7, GSM1: -> AT+CPMS? 2018-01-13 20:23:18,7, GSM1: Command is sent, waiting for the answer. (5) 2018-01-13 20:23:18,7, GSM1: <- +CPMS: "SM", 0, 30, "SM", 0, 30, "SM", 0, 30 OK 2018-01-13 20:23:18,6, GSM1: Used memory is 0 of 30 2018-01-13 20:23:18,6, GSM1: No SMS received

Thanks.

There is no "SR" memory. You could check other memories: "ME", "SM_P" and "ME_P". I assume that you still do not see status reports.

Set loglevel to 7 and send a SMS which has report enabled. Check from the log if there is routed status report received after the message is sent. Wait some minutes. I however assume that there is no reports, as the CNMI is also not supported.

So it looks like this device does not support status reports.