SMS Server Tools 3
This site is hosted by
Basic information:
Additional information:
Get SMS Server Tools 3:
Additional Options

 Sponsored links

Custom Search

 Visitor locations
 SMS Server Tools 3 Community
Welcome, Guest. Please login or register. Fri Jun 14, 2024 18:04
SMSTools3 Community » Help and support Bottom

Whats the difference of init and init2 ?

Login and Post Reply

Page:  1

Author Post
Sep 2022
Location: Germany
I can not find a explanation about init and init2
In how to configure there is nearly nothing about that.
"most users do not need this" at init2 is not really helpful ....

What is the difference between init and init2?
Why should I use init2?
Is there a limit of characters in each init string?
Will init2 command only run, if init is OK?

Most items for HUAWEI modems refer to

Regardless of the effect of that command. Why not simply concat this to "init"?

Hope that someone can clarify this.

May 2009
Location: Jyväskylä, Finland
In some cases, it is not possible to give all the necessary commands to the modem at once, or it is clearer to give them separately. Because of this, two settings are available, one or both of which can be used.

In addition, there is a "wakeup_init" setting that may be needed with some modems, especially when using telnet. It is sent to the modem at the very beginning. There is a small wait after sending, but the return value is not checked. Most users won't need this.

If init or init2 fails (return value is not OK), the whole operation is aborted.

The maximum length of init strings is 98 characters, or 97 characters when using telnet.

Sep 2022
Location: Germany
Topic owner
Thank you for this information.

Maybe it would be helpful to add this infos to "How to configure". Just to prevent stupid questions, like mine ...

Login and Post Reply

Page:  1

SMSTools3 Community » Help and support Top

Time in this board is UTC.  

Privacy Policy   SMS Server Tools 3 Copyright © Keijo Kasvi.