Operating system name and version: Ubuntu 9.10
Version of smsd: 3.1.3
Smsd installed from: via make and make install
Name and model of a modem / phone: Samsung SGH-F250L
Interface: usb ttyACM0

i have a basic configuration:

# Example smsd.conf. Read the manual for a description

devices = GSM1
logfile = /var/log/smsd.log
loglevel = 7

[GSM1]
device = /dev/ttyACM0
incoming = yes

Thanks

Probably it's a smart phone which does not show incoming messages thru the AT command interface.

Check the log: there is a command AT+CPMS? sent to the device. If the answer is like +CPMS: ,,,,,,,, (many dots without values between them), your phone is "too" smart and can be used for sending only.

If the answer is something else, show a piece of the log here, use Private tags to protect the data if necessary.

keke

the problem was that the sms stored in the memory of phone, not in the simcard.

i move the sms from the memory to simcard and smstools3 read the message.

now my problem is decode the message ajajaja.

Thank you