Operating system name and version: altlinux 2.4
Version of smsd: 3-3.1.7beta7
Smsd installed from: sources
Name and model of a modem / phone: sim300,sim300,mc60,samd840
Interface: serial,serial,serial,USB


2010-04-22 11:41:22,6, d840: Serial port /dev/ttyUSB0 opened as 4, rtscts: 0, ba udrate: 115200 2010-04-22 11:41:22,6, d840: Serial port /dev/ttyUSB0 opened as 4, rtscts: 0, ba 2010-04-22 11:41:22,6, d840: Checking device for incoming SMS 2010-04-22 11:41:22,6, d840: Checking if modem is ready 2010-04-22 11:41:23,3, d840: Unexpected input: OK 2010-04-22 11:41:23,7, d840: -> AT 2010-04-22 11:41:23,7, d840: Command is sent, waiting for the answer 2010-04-22 11:41:23,7, d840: <- AT OK 2010-04-22 11:41:23,6, d840: Pre-initializing modem 2010-04-22 11:41:23,7, d840: -> ATE0+CMEE=1 2010-04-22 11:41:24,7, d840: Command is sent, waiting for the answer 2010-04-22 11:41:24,7, d840: <- ATE0+CMEE=1 OK 2010-04-22 11:41:24,6, d840: Checking if modem needs PIN 2010-04-22 11:41:24,7, d840: -> AT+CPIN? 2010-04-22 11:41:24,7, d840: Command is sent, waiting for the answer 2010-04-22 11:41:25,7, d840: <- ERROR 2010-04-22 11:41:25,2, d840: PIN handling: expected READY, modem answered ERROR

calling ready
atdt+38067123456;
BUSY


ussd not support or wrong command
at+CUSD?
ERROR
atdt*111#;
NO CARRIER

ati
Samsung SGH-D840
OK
AT+CMGS=36
> 0031000C9183**************
>
+CMGS:51
OK

Just disable the usage of a PIN and define:
pin = ignore



ati
WAVECOM MODEM

MULTIBAND 900E 1800

OK
atd+358401234567;
OK (after a call was answered)

NO CARRIER (after hangup)
at+cusd?
+CUSD: 1

OK
at+cusd=?
+CUSD: (0-2)

OK
atd*100#;
+CME ERROR: 3
atd*100#
OK

+CUSD: 2,"Liittymäsi saldo on 10.52 EUR, palvelusaldo (puhelut/tiedonsiirto Elisa mobiiliverkossa) on 0.00 EUR ja voimassaoloaika päättyy 20.06.2010.",15

ati
Samsung SGH-D840
OK
AT+CMGS=36
> 0031000C9183**************
>
+CMGS:51
OK




use
pin = ignore

worked!!

2010-04-22 13:54:39,7, d840: -> AT+CSQ 2010-04-22 13:54:39,7, d840: Command is sent, waiting for the answer 2010-04-22 13:54:40,7, d840: <- ERROR

status_signal_quality = yes

Starting SMS Daemon: There was 1 error while reading the config file: - Unknown setting for modem d840: status_signal_quality There was 1 major problem found.

AT OK at+cusd=? ERROR at+cusd? ERROR atd*111# NO CARRIER atd*111#; NO CARRIER

nm11 wrote

2010-04-22 13:54:39,7, d840: -> AT+CSQ 2010-04-22 13:54:39,7, d840: Command is sent, waiting for the answer 2010-04-22 13:54:40,7, d840: <- ERROR

[ Select ]

As this command, and some other commands do not work, this device cannot be used with SMSTools3.

nm11 wrote

Starting SMS Daemon: There was 1 error while reading the config file: - Unknown setting for modem d840: status_signal_quality There was 1 major problem found.

[ Select ]

That's a bug which will be fixed. Use the global setting while waiting the fixed version.

A problem remaining two
1. I can not make the terminal ussd request
2. Not discourage
phonecalls = 2
voicecall_hangup_ath = yes

add
3. +CLIP=1 does not show the number on incoming calls

device = /dev/ttyUSB1 init = AT+CPMS="SM","SM","SM" queues = gsm4 needs_wakeup_at = yes #modem_disabled = yes pin = ignore logfile = /var/log/sms/smsd.d840.log incoming = high report = yes rtscts = no baudrate = 460800 check_network = no phonecalls = 2 voicecall_hangup_ath = yes