Operating system name and version: OpenSUSE 11.2
Version of smsd: v3.1.6
Smsd installed from: package repository
Name and model of a modem / phone: Teltonika ModemUSB/G10 GSM Modem
Interface: USB

Hello everybody,

I have some problems to get smsd running, everything works fine but I can't register in the network. Searching the web doesn't brought something helpfull, so I hope somebody here could help me.

smsd.log
2010-04-26 10:34:19,2, smsd: Smsd mainprocess is awaiting the termination of all modem handlers. PID: 22601. 2010-04-26 10:34:19,2, smsd: Smsd mainprocess terminated. PID 22601, was started 10-04-26 10:32:19. 2010-04-26 10:34:20,2, smsd: Smsd v3.1.6 started. 2010-04-26 10:34:20,2, smsd: Running as root:root. 2010-04-26 10:34:20,7, smsd: Running startup_check (shell): /tmp/smsd_script.sMNYpT /tmp/smsd_data.TVi0to 2010-04-26 10:34:20,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0) 2010-04-26 10:34:20,4, smsd: File mode creation mask: 022 (0644, rw-r--r--). 2010-04-26 10:34:20,5, GSM1: Modem handler 0 has started. PID: 23182. Will only send messages. 2010-04-26 10:34:20,5, smsd: Outgoing file checker has started. PID: 23181. 2010-04-26 10:34:20,5, GSM1: Using check_memory_method 1: CPMS is used. 2010-04-26 10:34:20,6, GSM1: Checking if modem is ready 2010-04-26 10:34:20,7, GSM1: -> AT 2010-04-26 10:34:20,7, GSM1: Command is sent, waiting for the answer 2010-04-26 10:34:20,7, GSM1: <- AT OK 2010-04-26 10:34:20,6, GSM1: Pre-initializing modem 2010-04-26 10:34:20,7, GSM1: -> ATE0+CMEE=1 2010-04-26 10:34:20,7, GSM1: Command is sent, waiting for the answer 2010-04-26 10:34:21,7, GSM1: <- ATE0+CMEE=1 OK 2010-04-26 10:34:21,6, GSM1: Checking if modem needs PIN 2010-04-26 10:34:21,7, GSM1: -> AT+CPIN? 2010-04-26 10:34:21,7, GSM1: Command is sent, waiting for the answer 2010-04-26 10:34:21,7, GSM1: <- +CPIN: READY OK 2010-04-26 10:34:21,6, GSM1: Initializing modem 2010-04-26 10:34:21,7, GSM1: -> ATZ 2010-04-26 10:34:21,7, GSM1: Command is sent, waiting for the answer 2010-04-26 10:34:22,7, GSM1: <- OK 2010-04-26 10:34:22,7, GSM1: -> AT+CSQ 2010-04-26 10:34:22,7, GSM1: Command is sent, waiting for the answer 2010-04-26 10:34:22,7, GSM1: <- AT+CSQ +CSQ: 13,99 OK 2010-04-26 10:34:22,6, GSM1: Checking if Modem is registered to the network 2010-04-26 10:34:22,7, GSM1: -> AT+CREG? 2010-04-26 10:34:22,7, GSM1: Command is sent, waiting for the answer 2010-04-26 10:34:23,7, GSM1: <- AT+CREG? +CREG: 0,3 OK 2010-04-26 10:34:23,6, GSM1: Modem said: registration denied. Retrying. 2010-04-26 10:34:24,7, GSM1: -> AT+CSQ 2010-04-26 10:34:24,7, GSM1: Command is sent, waiting for the answer 2010-04-26 10:34:24,7, GSM1: <- AT+CSQ +CSQ: 13,99 OK 2010-04-26 10:34:24,7, GSM1: -> AT+CREG? 2010-04-26 10:34:25,7, GSM1: Command is sent, waiting for the answer 2010-04-26 10:34:25,7, GSM1: <- AT+CREG? +CREG: 0,3 OK 2010-04-26 10:34:25,6, GSM1: Modem said: registration denied. Retrying. 2010-04-26 10:34:26,7, GSM1: -> AT+CSQ 2010-04-26 10:34:26,7, GSM1: Command is sent, waiting for the answer 2010-04-26 10:34:26,7, GSM1: <- AT+CSQ +CSQ: 13,99 OK 2010-04-26 10:34:27,7, GSM1: -> AT+CREG? 2010-04-26 10:34:27,7, GSM1: Command is sent, waiting for the answer 2010-04-26 10:34:27,7, GSM1: <- AT+CREG? +CREG: 0,3 OK 2010-04-26 10:34:27,3, GSM1: Error: registration is denied. 2010-04-26 10:34:27,2, GSM1: Modem handler 0 terminated abnormally. PID: 23182.

smsd.conf
devices = GSM1 logfile = /var/log/smsd.log loglevel = 7 [GSM1] init=ATZ device = /dev/ttyUSB0 incoming = no cs_convert = yes pin = **** report = no rtscts = no baudrate = 115200

Thank you!

Greetings
nke

I got "registration denied" with a new SIM which was not yet activeted by the operator.

Have you checked your SIM with a handset, if it can be used?

If the SIM is working, you could try a modem setting check_network = no. If the sending fails, check the antenna and GSM coverage.