Operating system name and version: Centos 5.3
Version of smsd: 3.1.14
Smsd installed from: sources
Name and model of a modem / phone: SE W810i
Interface: serial


Message_id is 0 always for send SMS in logfile and SMS send file.
Please help.

config file:
# Global configuration devices = modem1 loglevel = 7 #logfile = /var/log/smsd.log logfile = /var/log/sms/smstools.log outgoing = /var/spool/sms/outgoing checked = /var/spool/sms/checked failed = /var/spool/sms/failed incoming = /var/spool/sms/incoming sent = /var/spool/sms/sent regular_run = /var/spool/sms/regular_run stats = /var/spool/sms/stats report = /var/spool/sms/report #delivered = /var/spool/sms/delivered delaytime = 6 errorsleeptime = 12 blocktime = 180 autosplit = 3 receive_before_send = yes keep_filename = yes [default] regular_run_interval = 10 regular_run_logfile = /var/log/sms/smsd_regular_run.log # Modem configuration # iTegno 3000 USB [modem1] #init = AT+CNMI=2,3,2,0,0;+CMGF=0 #init = AT+CNMI=2,0,0,1,0 init = AT+CPMS="ME","ME","ME" init2 = AT+CNMI=2,0,0,1,0 #device = /dev/ttyUSB0 device = /dev/ttyS0 incoming = yes report = yes routed_status_report_cnma = no #keep_messages = yes #pin = baudrate = 115200 regular_run = /var/spool/sms/regular_run/modem1.sh regular_run_post_run = /var/spool/sms/regular_run/modem1.sh regular_run_cmdfile = /var/spool/sms/regular_run/modem1.cmdfile #regular_run_cmdfile = /var/spool/sms/regular_run/modem1.ussd regular_run_statfile = /var/spool/sms/regular_run/modem1.statfile #eventhandler = /usr/local/bin/smsd_eventhandler.sh

Send file:

From: +6583766055 To: +6597555334 Report: yes Modem: modem1 Sent: 10-11-07 18:48:03 Message_id: 0 IMSI: 525016131286817 Hi u there, good morning!!

Report file:

From: 6597555334 From_TOA: 91 international, ISDN/telephone Sent: 10-11-07 18:48:00 Received: 10-11-07 18:48:16 Subject: modem1 Modem: modem1 IMSI: 525016131286817 Report: no Alphabet: ISO Length: 118 SMS STATUS REPORT Message_id: 56 Discharge_timestamp: 10-11-07 18:48:00 Status: 0,Ok,short message received by the SME

Logfile:

2010-11-07 18:48:04,6, modem1: Checking device for incoming SMS 2010-11-07 18:48:04,6, modem1: Checking memory size 2010-11-07 18:48:04,7, modem1: -> AT+CPMS? 2010-11-07 18:48:04,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:48:04,7, modem1: <- +CPMS: "ME",0,200,"ME",0,200,"ME",0,200 OK 2010-11-07 18:48:04,6, modem1: Used memory is 0 of 200 2010-11-07 18:48:04,6, modem1: No SMS received 2010-11-07 18:48:10,6, modem1: Checking device for incoming SMS 2010-11-07 18:48:10,6, modem1: Checking if modem is ready 2010-11-07 18:48:11,3, modem1: Routed status report detected: +CDS: 29 06380A9156795535430111708184002301117081840023000000000012 2010-11-07 18:48:11,3, modem1: Saved routed status report for later handling. However, you MUST DISABLE status report routing with modem settings. 2010-11-07 18:48:11,7, modem1: -> AT 2010-11-07 18:48:11,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:48:11,7, modem1: <- OK 2010-11-07 18:48:11,6, modem1: Pre-initializing modem 2010-11-07 18:48:11,7, modem1: -> ATE0+CMEE=1;+CREG=2 2010-11-07 18:48:11,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:48:12,7, modem1: <- OK 2010-11-07 18:48:12,6, modem1: Initializing modem 2010-11-07 18:48:12,7, modem1: -> AT+CPMS="ME","ME","ME" 2010-11-07 18:48:12,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:48:12,7, modem1: <- +CPMS: 0,200,0,200,0,200 OK 2010-11-07 18:48:13,7, modem1: -> AT+CNMI=2,0,0,1,0 2010-11-07 18:48:13,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:48:13,7, modem1: <- OK 2010-11-07 18:48:13,7, modem1: -> AT+CSQ 2010-11-07 18:48:13,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:48:14,7, modem1: <- +CSQ: 19,99 OK 2010-11-07 18:48:14,6, modem1: Signal Strength Indicator: (19,99) -75 dBm (Good), Bit Error Rate: not known or not detectable 2010-11-07 18:48:14,6, modem1: Checking if Modem is registered to the network 2010-11-07 18:48:14,7, modem1: -> AT+CREG? 2010-11-07 18:48:14,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:48:14,7, modem1: <- +CREG: 2,1,"3F00","0000377D" OK 2010-11-07 18:48:14,6, modem1: Modem is registered to the network 2010-11-07 18:48:14,6, modem1: Selecting PDU mode 2010-11-07 18:48:15,7, modem1: -> AT+CMGF=0 2010-11-07 18:48:15,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:48:15,7, modem1: <- OK 2010-11-07 18:48:15,6, modem1: Checking memory size 2010-11-07 18:48:15,7, modem1: -> AT+CPMS? 2010-11-07 18:48:15,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:48:16,7, modem1: <- +CPMS: "ME",0,200,"ME",0,200,"ME",0,200 OK 2010-11-07 18:48:16,6, modem1: Used memory is 0 of 200 2010-11-07 18:48:16,6, modem1: No SMS received 2010-11-07 18:48:16,6, modem1: Handling saved routed messages / status reports 2010-11-07 18:48:16,5, modem1: SMS received (report, Message_id: 56, Status: 0,Ok,short message received by the SME), From: 6597555334 2010-11-07 18:48:16,6, modem1: Wrote an incoming message file: /var/spool/sms/report/modem1.fFzAde 2010-11-07 18:48:16,6, modem1: Running a regular_run (PRE_RUN) 2010-11-07 18:48:16,7, modem1: Running regular_run (modem): /var/spool/sms/regular_run/modem1.sh PRE_RUN "/var/spool/sms/regular_run/modem1.statfile" modem1 2010-11-07 18:48:16,7, modem1: Done: regular_run (modem), execution time 0 sec., status: 0 (0) 2010-11-07 18:48:16,6, modem1: Running a regular_run POST_RUN 2010-11-07 18:48:16,7, modem1: Running regular_run_post_run (modem): /var/spool/sms/regular_run/modem1.sh POST_RUN "/var/spool/sms/regular_run/modem1.statfile" modem1 2010-11-07 18:48:16,7, modem1: Done: regular_run_post_run (modem), execution time 0 sec., status: 0 (0)

Your log does not show how a message is sent. Can you show those lines?

Hi,

is this log ok ?

2010-11-07 18:31:20,6, modem1: Pre-initializing modem 2010-11-07 18:31:20,7, modem1: -> ATE0+CMEE=1;+CREG=2 2010-11-07 18:31:20,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:20,7, modem1: <- OK 2010-11-07 18:31:20,6, modem1: Initializing modem 2010-11-07 18:31:21,7, modem1: -> AT+CPMS="ME","ME","ME" 2010-11-07 18:31:21,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:21,7, modem1: <- +CPMS: 0,200,0,200,0,200 OK 2010-11-07 18:31:21,7, modem1: -> AT+CNMI=2,3,2,1,0 2010-11-07 18:31:21,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:22,7, modem1: <- OK 2010-11-07 18:31:22,7, modem1: -> AT+CSQ 2010-11-07 18:31:22,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:22,7, modem1: <- +CSQ: 20,99 OK 2010-11-07 18:31:22,6, modem1: Signal Strength Indicator: (20,99) -73 dBm (Excellent), Bit Error Rate: not known or not detectable 2010-11-07 18:31:22,6, modem1: Checking if Modem is registered to the network 2010-11-07 18:31:23,7, modem1: -> AT+CREG? 2010-11-07 18:31:23,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:23,7, modem1: <- +CREG: 2,1,"3F00","000037A4" OK 2010-11-07 18:31:23,6, modem1: Modem is registered to the network 2010-11-07 18:31:23,6, modem1: Selecting PDU mode 2010-11-07 18:31:23,7, modem1: -> AT+CMGF=0 2010-11-07 18:31:23,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:24,7, modem1: <- OK 2010-11-07 18:31:24,6, modem1: Checking memory size 2010-11-07 18:31:24,7, modem1: -> AT+CPMS? 2010-11-07 18:31:24,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:24,7, modem1: <- +CPMS: "ME",0,200,"ME",0,200,"ME",0,200 OK 2010-11-07 18:31:24,6, modem1: Used memory is 0 of 200 2010-11-07 18:31:24,6, modem1: No SMS received 2010-11-07 18:31:24,6, modem1: Sending SMS from +6583766055 to 6597555334 2010-11-07 18:31:24,6, modem1: Checking if modem is ready 2010-11-07 18:31:25,7, modem1: -> AT 2010-11-07 18:31:25,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:25,7, modem1: <- OK 2010-11-07 18:31:25,6, modem1: Pre-initializing modem 2010-11-07 18:31:25,7, modem1: -> ATE0+CMEE=1;+CREG=2 2010-11-07 18:31:25,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:26,7, modem1: <- OK 2010-11-07 18:31:26,6, modem1: Initializing modem 2010-11-07 18:31:26,7, modem1: -> AT+CPMS="ME","ME","ME" 2010-11-07 18:31:26,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:33,7, modem1: <- +CPMS: 0,200,0,200,0,200 OK 2010-11-07 18:31:34,7, modem1: -> AT+CNMI=2,3,2,1,0 2010-11-07 18:31:34,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:34,7, modem1: <- OK 2010-11-07 18:31:34,7, modem1: -> AT+CSQ 2010-11-07 18:31:34,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:35,7, modem1: <- +CSQ: 19,99 OK 2010-11-07 18:31:35,6, modem1: Signal Strength Indicator: (19,99) -75 dBm (Good), Bit Error Rate: not known or not detectable 2010-11-07 18:31:35,6, modem1: Checking if Modem is registered to the network 2010-11-07 18:31:35,7, modem1: -> AT+CREG? 2010-11-07 18:31:35,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:35,7, modem1: <- +CREG: 2,1,"3F00","000037A4" OK 2010-11-07 18:31:35,6, modem1: Modem is registered to the network 2010-11-07 18:31:35,6, modem1: Selecting PDU mode 2010-11-07 18:31:36,7, modem1: -> AT+CMGF=0 2010-11-07 18:31:36,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:36,7, modem1: <- OK 2010-11-07 18:31:36,7, modem1: -> AT+CMGS=36 2010-11-07 18:31:36,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:37,7, modem1: <- > 2010-11-07 18:31:37,7, modem1: -> 0031000A9156795535430000FF1AC834A80EA2A3CBF2320B747EBFC9A0F65BEE4EBBCFA110. 2010-11-07 18:31:37,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:40,7, modem1: <- +CMGS: 0 OK 2010-11-07 18:31:40,5, modem1: SMS sent, Message_id: 0, To: 6597555334, sending time 16 sec. 2010-11-07 18:31:40,6, modem1: Moved file /var/spool/sms/checked/out.0.1.373 to /var/spool/sms/sent/out.0.1.373 2010-11-07 18:31:40,6, modem1: Checking device for incoming SMS 2010-11-07 18:31:40,6, modem1: Checking memory size 2010-11-07 18:31:41,7, modem1: -> AT+CPMS? 2010-11-07 18:31:41,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:41,7, modem1: <- +CPMS: "ME",0,200,"ME",0,200,"ME",0,200 OK 2010-11-07 18:31:41,6, modem1: Used memory is 0 of 200 2010-11-07 18:31:41,6, modem1: No SMS received 2010-11-07 18:31:41,6, modem1: Running a regular_run (PRE_RUN) 2010-11-07 18:31:41,7, modem1: Running regular_run (modem): /var/spool/sms/regular_run/modem1.sh PRE_RUN "/var/spool/sms/regular_run/modem1.statfile" modem1 2010-11-07 18:31:41,7, modem1: Done: regular_run (modem), execution time 0 sec., status: 0 (0) 2010-11-07 18:31:41,6, modem1: Running a regular_run POST_RUN 2010-11-07 18:31:41,7, modem1: Running regular_run_post_run (modem): /var/spool/sms/regular_run/modem1.sh POST_RUN "/var/spool/sms/regular_run/modem1.statfile" modem1 2010-11-07 18:31:41,7, modem1: Done: regular_run_post_run (modem), execution time 0 sec., status: 0 (0) 2010-11-07 18:31:41,6, modem1: Checking device for incoming SMS 2010-11-07 18:31:41,6, modem1: Checking memory size 2010-11-07 18:31:41,7, modem1: -> AT+CPMS? 2010-11-07 18:31:41,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:42,7, modem1: <- +CPMS: "ME",0,200,"ME",0,200,"ME",0,200 OK 2010-11-07 18:31:42,6, modem1: Used memory is 0 of 200 2010-11-07 18:31:42,6, modem1: No SMS received 2010-11-07 18:31:48,6, modem1: Checking device for incoming SMS 2010-11-07 18:31:48,6, modem1: Checking if modem is ready 2010-11-07 18:31:48,3, modem1: Routed status report detected: +CDS: 29 06360A9156795535430111708113002301117081130023000000000012 2010-11-07 18:31:48,3, modem1: Saved routed status report for later handling. However, you MUST DISABLE status report routing with modem settings. 2010-11-07 18:31:48,7, modem1: Sending acknowledgement 2010-11-07 18:31:48,7, modem1: -> AT+CNMA 2010-11-07 18:31:49,7, modem1: <- ERROR 2010-11-07 18:31:49,7, modem1: -> AT 2010-11-07 18:31:49,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:49,7, modem1: <- OK 2010-11-07 18:31:49,6, modem1: Pre-initializing modem 2010-11-07 18:31:49,7, modem1: -> ATE0+CMEE=1;+CREG=2 2010-11-07 18:31:49,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:50,7, modem1: <- OK 2010-11-07 18:31:50,6, modem1: Initializing modem 2010-11-07 18:31:50,7, modem1: -> AT+CPMS="ME","ME","ME" 2010-11-07 18:31:50,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:50,7, modem1: <- +CPMS: 0,200,0,200,0,200 OK 2010-11-07 18:31:50,7, modem1: -> AT+CNMI=2,3,2,1,0 2010-11-07 18:31:50,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:51,7, modem1: <- OK 2010-11-07 18:31:51,7, modem1: -> AT+CSQ 2010-11-07 18:31:51,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:51,7, modem1: <- +CSQ: 18,99 OK 2010-11-07 18:31:51,6, modem1: Signal Strength Indicator: (18,99) -77 dBm (Good), Bit Error Rate: not known or not detectable 2010-11-07 18:31:51,6, modem1: Checking if Modem is registered to the network 2010-11-07 18:31:52,7, modem1: -> AT+CREG? 2010-11-07 18:31:52,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:52,7, modem1: <- +CREG: 2,1,"3F00","000037A4" OK 2010-11-07 18:31:52,6, modem1: Modem is registered to the network 2010-11-07 18:31:52,6, modem1: Selecting PDU mode 2010-11-07 18:31:52,7, modem1: -> AT+CMGF=0 2010-11-07 18:31:52,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:53,7, modem1: <- OK 2010-11-07 18:31:53,6, modem1: Checking memory size 2010-11-07 18:31:53,7, modem1: -> AT+CPMS? 2010-11-07 18:31:53,7, modem1: Command is sent, waiting for the answer 2010-11-07 18:31:53,7, modem1: <- +CPMS: "ME",0,200,"ME",0,200,"ME",0,200 OK 2010-11-07 18:31:53,6, modem1: Used memory is 0 of 200 2010-11-07 18:31:53,6, modem1: No SMS received 2010-11-07 18:31:53,6, modem1: Handling saved routed messages / status reports 2010-11-07 18:31:53,5, modem1: SMS received (report, Message_id: 54, Status: 0,Ok,short message received by the SME), From: 6597555334 2010-11-07 18:31:53,6, modem1: Wrote an incoming message file: /var/spool/sms/report/modem1.rPtpOd 2010-11-07 18:31:53,6, modem1: Running a regular_run (PRE_RUN) 2010-11-07 18:31:53,7, modem1: Running regular_run (modem): /var/spool/sms/regular_run/modem1.sh PRE_RUN "/var/spool/sms/regular_run/modem1.statfile" modem1 2010-11-07 18:31:53,7, modem1: Done: regular_run (modem), execution time 0 sec., status: 0 (0) 2010-11-07 18:31:53,6, modem1: Running a regular_run POST_RUN 2010-11-07 18:31:53,7, modem1: Running regular_run_post_run (modem): /var/spool/sms/regular_run/modem1.sh POST_RUN "/var/spool/sms/regular_run/modem1.statfile" modem1 2010-11-07 18:31:53,7, modem1: Done: regular_run_post_run (modem), execution time 0 sec., status: 0 (0)

The log is ok, but the answer from the modem is not. It returns zero as a message id and smsd cannot do anything for this.

Status report is correct, but returned in "old" format (without CSA). It is handled because smsd tries both modes for incoming messages. You could try if modem setting mode = old makes any difference with outgoing message. If it does not work, you have to live without message id's, or use another modem, or perhaps upgrade the firmware of a device.

Hi, keke

Thanks for your advise, I got message_id now by using other phone.