Operating system name and version: Ubuntu Server 12.04
Version of smsd: 3.1.14
Smsd installed from: sources / package repository / from elsewhere... source
Name and model of a modem / phone: MultiTech rcell
Interface: serial / USB / some adapter... ethernet

I have some problems sending sms via Ethernet through the Multitech Modem:

smsd.conf:
devices = GSM1 logfile = /var/log/smsd.log loglevel = 7 blocktime = 60 alarmlevel = 5 alarmhandler = /usr/local/bin/alarm.sh user = root group = root infofile = /var/run/sms/smsd.working pidfile = /var/run/sms/smsd.pid [GSM1] device = @xxx:xxx:xxx:xxx:5000 telnet_login = xxxxx telnet_password = xxxxx # pre_init = no keep_open = no incoming = no baudrate = 2400 send_delay = 10 pin = 1234 rtscts = no cs_convert = yes report = no regular_run_interval = 60 regular_run_cmd = AT+CREG?;+CSQ;+COPS? regular_run_statfile = /dev/shm/sms_stat

if i send sms via sendsms, the log says following:
2012-07-04 15:11:23,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/send_ZyPSlv 2012-07-04 15:11:23,6, GSM1: Sending SMS from to 06502322334 2012-07-04 15:11:23,6, GSM1: Checking if modem is ready 2012-07-04 15:11:23,7, GSM1: -> AT 2012-07-04 15:11:23,7, GSM1: Command is sent, waiting for the answer 2012-07-04 15:11:24,7, GSM1: <- OK 2012-07-04 15:11:24,6, GSM1: Pre-initializing modem 2012-07-04 15:11:24,7, GSM1: -> ATE0+CMEE=1;+CREG=2 2012-07-04 15:11:24,7, GSM1: Command is sent, waiting for the answer 2012-07-04 15:11:25,7, GSM1: <- OK +CREG: 1,"4846","E87B" 2012-07-04 15:11:25,6, GSM1: Checking if modem needs PIN 2012-07-04 15:11:25,7, GSM1: -> AT+CPIN? 2012-07-04 15:11:25,7, GSM1: Command is sent, waiting for the answer 2012-07-04 15:11:25,7, GSM1: <- +CPIN: READY 2012-07-04 15:11:25,7, GSM1: -> AT+CSQ 2012-07-04 15:11:25,7, GSM1: Command is sent, waiting for the answer 2012-07-04 15:11:26,7, GSM1: <- +CSQ: 27,0 OK 2012-07-04 15:11:26,6, GSM1: Signal Strength Indicator: (27,0) -59 dBm (Excellent), Bit Error Rate: less than 0.2 % 2012-07-04 15:11:26,6, GSM1: Checking if Modem is registered to the network 2012-07-04 15:11:26,7, GSM1: -> AT+CREG? 2012-07-04 15:11:26,7, GSM1: Command is sent, waiting for the answer 2012-07-04 15:11:26,7, GSM1: <- +CREG: 2,1,"4846","E87B" OK 2012-07-04 15:11:26,6, GSM1: Modem is registered to the network 2012-07-04 15:11:26,6, GSM1: Selecting PDU mode 2012-07-04 15:11:26,7, GSM1: -> AT+CMGF=0 2012-07-04 15:11:27,7, GSM1: Command is sent, waiting for the answer 2012-07-04 15:11:27,7, GSM1: <- OK 2012-07-04 15:11:27,7, GSM1: -> AT+CMGS=18 2012-07-04 15:11:27,7, GSM1: Command is sent, waiting for the answer 2012-07-04 15:11:27,7, GSM1: <- > 2012-07-04 15:11:28,7, GSM1: -> 0011000B916005322233F40000FF04F4F29C0E 2012-07-04 15:11:28,7, GSM1: Command is sent, waiting for the answer 2012-07-04 15:11:31,7, GSM1: <- +CMGS: 102 OK 2012-07-04 15:11:31,5, GSM1: SMS sent, Message_id: 102, To: 06502322334, sending time 8 sec. 2012-07-04 15:11:31,6, GSM1: Deleted file /var/spool/sms/checked/send_ZyPSlv

The sms is marked as sent but nothing comes to my cell. If i log on per telnet directly on the Multitech, and send an sms per AT command,
everything works well.
Maybe you guys can help me out in this ..... problem!

regards
ndeebee

I solved the problem: entered the phone number with a 0 instead of the country code...