Operating system name and version: Ubuntu 12.04 LTS Server
Version of smsd: 3 (?) I do not know how to get this information - the newest one from the repos
Smsd installed from: sources
Name and model of a modem / phone: Globetrotter 3g
Interface: PCMCIA

Hi guys,

I am in trouble. I programmed a small java-based Server Application and this depends on the great "SMS Server Tools". My problem is, that the smstools is not getting running.

My device is attached to the PCMCIA port and is working properly:



But if try to start the sms tools i get the following error:



My config looks as following:

devices = GSM1
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
incoming = /var/spool/sms/incoming
logfile = /var/log/smstools/smsd.log
infofile = /var/run/smstools/smsd.working
pidfile = /var/run/smstools/smsd.pid
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
stats = /var/log/smstools/smsd_stats
#loglevel = 7
#delaytime = 10
#errorsleeptime = 10
#blocktime = 3600
#stats = /var/log/smsd_stats
#stats_interval = 3600
#stats_no_zeroes = no
#checkhandler = /usr/local/bin/smscheck
receive_before_send = no
# autosplit 0=no 1=yes 2=with text numbers 3=concatenated
autosplit = 3
# store_received_pdu 0=no, 1=unsupported, 2=unsupported and 8bit, 3=all
#store_received_pdu = 1
#validity = 255

#pin = 2222
#mode = new
#smsc = 491710760000
#baudrate = 19200
#rtscts = yes
#cs_convert = yes
#report = no
#primary_memory = memory name
#secondary_memory = memory name
#secondary_memory_max = number
#pdu_from_file = /var/spool/sms/GSM2-PDU
#sending_disabled = no
#decode_unicode_text = no
#internal_combine = no
[GSM1]
#init =
device = /dev/noz0
incoming = yes
#pin = m
memory_start = 0
baudrate = 19200

 
 
'smsdconf' Syntax Highlight powered by GeSHi


I am pretty much in trouble. Do you have any ideas?

kewes