SMSTools3 Help and support

Operating system name and version: debian squeeze
Version of smsd: v.3.1.11
Smsd installed from: package repository
Name and model of a modem / phone: Huawei 1750, T-Mobile web'n walk Fusion II
Interface: USB

Hi,

i got the usb-modem to work. The switching is gone, but sending sms isn't working right now. If i sent a message, i got it on the phone, but smstools didn't get the correct answer from the modem.

2012-07-17 13:20:12,2, smsd: Smsd v3.1.11 started.
2012-07-17 13:20:12,2, smsd: Running as smsd:dialout.
2012-07-17 13:20:12,7, smsd: Running startup_check (shell): /tmp/smsd_script.yYhqCV /tmp/smsd_data.aqmwVk
2012-07-17 13:20:12,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2012-07-17 13:20:12,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2012-07-17 13:20:12,5, smsd: Outgoing file checker has started. PID: 1420.
2012-07-17 13:20:12,5, GSM1: Modem handler 0 has started. PID: 1421. Will only send messages.
2012-07-17 13:20:12,5, GSM1: Using communication_delay between new commands 5 milliseconds.
2012-07-17 13:20:12,6, GSM1: Checking if modem is ready
2012-07-17 13:20:12,7, GSM1: -> AT
2012-07-17 13:20:12,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:20:12,7, GSM1: <- OK
2012-07-17 13:20:12,6, GSM1: Pre-initializing modem
2012-07-17 13:20:12,7, GSM1: -> ATE0+CMEE=1
2012-07-17 13:20:13,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:20:13,7, GSM1: <- OK
2012-07-17 13:20:13,6, GSM1: Checking if modem needs PIN
2012-07-17 13:20:13,7, GSM1: -> AT+CPIN?
2012-07-17 13:20:13,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:20:13,7, GSM1: <- +CPIN: READY OK
2012-07-17 13:20:13,6, GSM1: Initializing modem
2012-07-17 13:20:14,7, GSM1: -> AT^CURC=0
2012-07-17 13:20:14,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:20:14,7, GSM1: <- OK
2012-07-17 13:20:14,7, GSM1: -> AT+CSQ
2012-07-17 13:20:14,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:20:15,7, GSM1: <- +CSQ: 23,99 OK
2012-07-17 13:20:15,6, GSM1: Signal Strength Indicator: (23,99) -67 dBm, Bit Error Rate: not known or not detectable
2012-07-17 13:20:15,6, GSM1: Checking if Modem is registered to the network
2012-07-17 13:20:15,7, GSM1: -> AT+CREG?
2012-07-17 13:20:15,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:20:15,7, GSM1: <- +CREG: 0,1 OK
2012-07-17 13:20:15,6, GSM1: Modem is registered to the network
2012-07-17 13:20:15,6, GSM1: Selecting PDU mode
2012-07-17 13:20:16,7, GSM1: -> AT+CMGF=0
2012-07-17 13:20:16,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:20:16,7, GSM1: <- OK
2012-07-17 13:20:16,7, GSM1: -> AT+CIMI
2012-07-17 13:20:16,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:20:16,7, GSM1: <- 262019339093971 OK
2012-07-17 13:20:17,7, GSM1: -> AT+CGSN
2012-07-17 13:20:17,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:20:17,7, GSM1: <- 354818047121493 OK
2012-07-17 13:20:17,5, GSM1: CGSN: 354818047121493
2012-07-17 13:20:17,5, GSM1: IMSI: 262019339093971
2012-07-17 13:20:17,5, GSM1: Waiting for messages to send...
2012-07-17 13:23:03,5, smsd: Moved file /var/spool/sms/outgoing/send_EriMu9 to /var/spool/sms/checked
2012-07-17 13:23:03,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/send_EriMu9
2012-07-17 13:23:03,6, GSM1: Sending SMS from  to 49xxxxxxxxxxxx
2012-07-17 13:23:03,6, GSM1: Checking if modem is ready
2012-07-17 13:23:03,7, GSM1: -> AT
2012-07-17 13:23:03,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:23:03,7, GSM1: <- OK
2012-07-17 13:23:03,6, GSM1: Pre-initializing modem
2012-07-17 13:23:03,7, GSM1: -> ATE0+CMEE=1
2012-07-17 13:23:03,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:23:04,7, GSM1: <- OK
2012-07-17 13:23:04,6, GSM1: Initializing modem
2012-07-17 13:23:04,7, GSM1: -> AT^CURC=0
2012-07-17 13:23:04,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:23:04,7, GSM1: <- OK
2012-07-17 13:23:05,7, GSM1: -> AT+CSQ
2012-07-17 13:23:05,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:23:05,7, GSM1: <- +CSQ: 23,99 OK
2012-07-17 13:23:05,6, GSM1: Signal Strength Indicator: (23,99) -67 dBm, Bit Error Rate: not known or not detectable
2012-07-17 13:23:05,6, GSM1: Checking if Modem is registered to the network
2012-07-17 13:23:05,7, GSM1: -> AT+CREG?
2012-07-17 13:23:05,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:23:06,7, GSM1: <- +CREG: 0,1 OK
2012-07-17 13:23:06,6, GSM1: Modem is registered to the network
2012-07-17 13:23:06,6, GSM1: Selecting PDU mode
2012-07-17 13:23:06,7, GSM1: -> AT+CMGF=0
2012-07-17 13:23:06,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:23:06,7, GSM1: <- OK
2012-07-17 13:23:07,7, GSM1: -> AT+CMGS=18
2012-07-17 13:23:07,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:23:07,7, GSM1: <- >
2012-07-17 13:23:07,7, GSM1: -> 0011000C919471638426560000FF04D4F29C0E^Z
2012-07-17 13:23:07,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:24:07,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 1.
2012-07-17 13:24:07,7, GSM1: <-
2012-07-17 13:24:07,3, GSM1: The modem answer was not OK:
2012-07-17 13:24:07,5, GSM1: Waiting 10 sec. before retrying
2012-07-17 13:24:17,6, GSM1: Checking if modem is ready
2012-07-17 13:24:18,7, GSM1: -> AT
2012-07-17 13:24:18,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:24:23,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 2.
2012-07-17 13:25:05,7, GSM1: -> ^Z
2012-07-17 13:25:05,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:25:10,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 11.
2012-07-17 13:25:10,7, GSM1: <-
2012-07-17 13:25:11,3, GSM1: Unexpected input: +CMGS: 27 OK OK OK OK OK OK
2012-07-17 13:25:11,7, GSM1: -> AT
2012-07-17 13:25:11,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:25:12,7, GSM1: <- OK
2012-07-17 13:25:12,6, GSM1: Pre-initializing modem
2012-07-17 13:25:12,7, GSM1: -> ATE0+CMEE=1
2012-07-17 13:25:12,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:25:12,7, GSM1: <- OK
2012-07-17 13:25:12,6, GSM1: Initializing modem
2012-07-17 13:25:13,7, GSM1: -> AT^CURC=0
2012-07-17 13:25:13,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:25:13,7, GSM1: <- OK
2012-07-17 13:25:13,7, GSM1: -> AT+CSQ
2012-07-17 13:25:13,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:25:14,7, GSM1: <- +CSQ: 20,99 OK
2012-07-17 13:25:14,6, GSM1: Signal Strength Indicator: (20,99) -73 dBm, Bit Error Rate: not known or not detectable
2012-07-17 13:25:14,6, GSM1: Checking if Modem is registered to the network
2012-07-17 13:25:14,7, GSM1: -> AT+CREG?
2012-07-17 13:25:14,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:25:14,7, GSM1: <- +CREG: 0,1 OK
2012-07-17 13:25:14,6, GSM1: Modem is registered to the network
2012-07-17 13:25:14,6, GSM1: Selecting PDU mode
2012-07-17 13:25:15,7, GSM1: -> AT+CMGF=0
2012-07-17 13:25:15,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:25:15,7, GSM1: <- OK
2012-07-17 13:25:15,7, GSM1: -> AT+CMGS=18
2012-07-17 13:25:15,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:25:15,7, GSM1: <- >
2012-07-17 13:25:16,7, GSM1: -> 0011000C919471638426560000FF04D4F29C0E^Z
2012-07-17 13:25:16,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:26:16,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 1.
2012-07-17 13:26:16,7, GSM1: <-
2012-07-17 13:26:16,3, GSM1: The modem answer was not OK:
2012-07-17 13:26:16,5, GSM1: Waiting 10 sec. before retrying
2012-07-17 13:26:26,6, GSM1: Checking if modem is ready
2012-07-17 13:26:26,7, GSM1: -> AT
2012-07-17 13:26:26,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:26:31,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 2.
2012-07-17 13:27:19,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 11.
2012-07-17 13:27:19,7, GSM1: <-
2012-07-17 13:27:20,3, GSM1: Unexpected input: +CMGS: 28 OK OK OK OK OK OK
2012-07-17 13:27:20,7, GSM1: -> AT
2012-07-17 13:27:20,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:27:20,7, GSM1: <- OK
2012-07-17 13:27:20,6, GSM1: Pre-initializing modem
2012-07-17 13:27:21,7, GSM1: -> ATE0+CMEE=1
2012-07-17 13:27:21,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:27:21,7, GSM1: <- OK
2012-07-17 13:27:21,6, GSM1: Initializing modem
2012-07-17 13:27:21,7, GSM1: -> AT^CURC=0
2012-07-17 13:27:21,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:27:22,7, GSM1: <- OK
2012-07-17 13:27:22,7, GSM1: -> AT+CSQ
2012-07-17 13:27:22,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:27:22,7, GSM1: <- +CSQ: 23,99 OK
2012-07-17 13:27:22,6, GSM1: Signal Strength Indicator: (23,99) -67 dBm, Bit Error Rate: not known or not detectable
2012-07-17 13:27:22,6, GSM1: Checking if Modem is registered to the network
2012-07-17 13:27:22,7, GSM1: -> AT+CREG?
2012-07-17 13:27:22,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:27:23,7, GSM1: <- +CREG: 0,1 OK
2012-07-17 13:27:23,6, GSM1: Modem is registered to the network
2012-07-17 13:27:23,6, GSM1: Selecting PDU mode
2012-07-17 13:27:23,7, GSM1: -> AT+CMGF=0
2012-07-17 13:27:23,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:27:23,7, GSM1: <- OK
2012-07-17 13:27:24,7, GSM1: -> AT+CMGS=18
2012-07-17 13:27:24,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:27:24,7, GSM1: <- >
2012-07-17 13:27:24,7, GSM1: -> 0011000C919471638426560000FF04D4F29C0E^Z
2012-07-17 13:27:24,7, GSM1: Command is sent, waiting for the answer
2012-07-17 13:28:24,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 1.
2012-07-17 13:28:24,7, GSM1: <-
2012-07-17 13:28:24,3, GSM1: The modem answer was not OK:
2012-07-17 13:28:24,4, GSM1: Sending SMS to 49xxxxxxxxxx failed

[ Select ]

[ Expand ]

here ist my smsd.conf

devices = GSM1
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
incoming = /var/spool/sms/incoming
logfile = /var/log/smstools/smsd.log
infofile = /var/run/smstools/smsd.working
pidfile = /var/run/smstools/smsd.pid
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
stats = /var/log/smstools/smsd_stats
loglevel = 7
#delaytime = 10
#errorsleeptime = 10
#blocktime = 3600
#stats = /var/log/smsd_stats
#stats_interval = 3600
#stats_no_zeroes = no
#checkhandler = /usr/local/bin/smscheck
receive_before_send = no
# autosplit 0=no 1=yes 2=with text numbers 3=concatenated
autosplit = 3
# store_received_pdu 0=no, 1=unsupported, 2=unsupported and 8bit, 3=all
#store_received_pdu = 1
#validity = 255
#decode_unicode_text = no
#internal_combine = no
# You can specify here an external program that is started whenever an alarm occurs.
# alarmhandler = /path/to/an/alarmhandler/script
# Specifies what levels start an alarmhandler. You can use value between 2 and 5.
# alarmlevel = 4
# eventhandler = @EVENTHANDLER@
#blacklist = /etc/smstools/blacklist
#whitelist = /etc/smstools/whitelist

[GSM1]
init = AT^CURC=0
device = /dev/ttyUSB0
cs_convert = yes
baudrate = 19200
communication_delay = 5
detect_unexpected_input = yes
 

[ Select ]

[ Expand ]

'smsdconf' Syntax Highlight powered by GeSHi

I think that the init-strings not correct. I tested it with gammu and it says, that it is waiting for response from network.

How to configurer the modem right?

How to configure Huawei E1750?