Operating system name and version: Win XP
Version of smsd: 3.1.6
Smsd installed from: sources
Name and model of a modem / phone: Siemens ES75
Interface: serial

Hi, please how to configure siemens es75?

my config file

devices = GSM1
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
report = /var/spool/sms/report
sent = /var/spool/sms/sent
logfile = /var/log/smsd.log
loglevel = 7
stats = /var/spool/sms/stats
keep_filename = no
date_filename = 1
os_cygwin = yes
hangup_incoming_call = yes
smart_logging = yes

[GSM1]
init =
device = /dev/com5
incoming = yes
memory_start = 1
# pin =
baudrate = 115200
phonecalls = no
smsc = 420603052000


Thank you for Helping!

Assuming that you cannot receive any messages, even when there surely is at least one message in the modem, try this definition:

init = AT+CPMS="ME","ME","ME"

If you have an unexpected input detected in the log, try this:
init2 = AT+CNMI=1,1,0,2

If you still do not get this device working, show a piece of a log here, or describe what the problem is.

Thank's but not working.

[GSM1]
#init = AT+CPMS="ME","ME","ME"
init = AT+CNMI=1,1,0,2
device = /dev/com5
incoming = yes
memory_start = 1
# pin =
baudrate = 115200
phonecalls = no
#smsc = 420603052000


Log

2010-03-04 17:37:25,2, smsd: Smsd v3.1.6 started. 2010-03-04 17:37:25,2, smsd: Running as SYSTEM:Administrators. 2010-03-04 17:37:25,7, smsd: Running startup_check (shell): /tmp/smsd_script.kfxqZz /tmp/smsd_data.ksyK92 2010-03-04 17:37:26,7, smsd: Done: startup_check (shell), execution time 1 sec., status: 0 (0) 2010-03-04 17:37:26,4, smsd: File mode creation mask: 022 (0644, rw-r--r--). 2010-03-04 17:37:26,2, smsd: Running in terminal mode. 2010-03-04 17:37:26,5, smsd: Outgoing file checker has started. PID: 3392. 2010-03-04 17:37:26,5, GSM1: Modem handler 0 has started. PID: 4040. 2010-03-04 17:37:26,5, GSM1: Using check_memory_method 1: CPMS is used. 2010-03-04 17:37:26,6, GSM1: Checking device for incoming SMS 2010-03-04 17:37:26,6, GSM1: Checking if modem is ready 2010-03-04 17:37:26,7, GSM1: -> AT 2010-03-04 17:37:26,7, GSM1: Command is sent, waiting for the answer 2010-03-04 17:37:27,7, GSM1: <- OK 2010-03-04 17:37:27,6, GSM1: Pre-initializing modem 2010-03-04 17:37:27,7, GSM1: -> ATE0+CMEE=1 2010-03-04 17:37:27,7, GSM1: Command is sent, waiting for the answer 2010-03-04 17:37:27,7, GSM1: <- OK 2010-03-04 17:37:27,6, GSM1: Checking if modem needs PIN 2010-03-04 17:37:28,7, GSM1: -> AT+CPIN? 2010-03-04 17:37:28,7, GSM1: Command is sent, waiting for the answer 2010-03-04 17:37:28,7, GSM1: <- +CPIN: READY OK 2010-03-04 17:37:28,6, GSM1: Initializing modem 2010-03-04 17:37:28,7, GSM1: -> AT+CNMI=1,1,0,2 2010-03-04 17:37:29,7, GSM1: Command is sent, waiting for the answer 2010-03-04 17:37:29,7, GSM1: <- OK 2010-03-04 17:37:29,7, GSM1: -> AT+CSQ 2010-03-04 17:37:29,7, GSM1: Command is sent, waiting for the answer 2010-03-04 17:37:30,7, GSM1: <- +CSQ: 14,0 OK 2010-03-04 17:37:30,6, GSM1: Checking if Modem is registered to the network 2010-03-04 17:37:30,7, GSM1: -> AT+CREG? 2010-03-04 17:37:30,7, GSM1: Command is sent, waiting for the answer 2010-03-04 17:37:30,7, GSM1: <- +CREG: 0,1 OK 2010-03-04 17:37:30,6, GSM1: Modem is registered to the network 2010-03-04 17:37:30,6, GSM1: Selecting PDU mode 2010-03-04 17:37:31,7, GSM1: -> AT+CMGF=0 2010-03-04 17:37:31,7, GSM1: Command is sent, waiting for the answer 2010-03-04 17:37:31,7, GSM1: <- OK 2010-03-04 17:37:32,7, GSM1: -> AT+CIMI 2010-03-04 17:37:32,7, GSM1: Command is sent, waiting for the answer 2010-03-04 17:37:32,7, GSM1: <- 230014500579311 OK 2010-03-04 17:37:32,7, GSM1: -> AT+CGSN 2010-03-04 17:37:32,7, GSM1: Command is sent, waiting for the answer 2010-03-04 17:37:33,7, GSM1: <- 355634003201792 OK 2010-03-04 17:37:33,5, GSM1: CGSN: 355634003201792 2010-03-04 17:37:33,5, GSM1: IMSI: 230014500579311 2010-03-04 17:37:33,6, GSM1: Checking if reading of messages is supported 2010-03-04 17:37:33,7, GSM1: -> AT+CPMS? 2010-03-04 17:37:33,7, GSM1: Command is sent, waiting for the answer 2010-03-04 17:37:39,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 1. 2010-03-04 17:37:39,7, GSM1: <- 2010-03-04 17:37:39,6, GSM1: Checking memory size 2010-03-04 17:37:40,7, GSM1: -> AT+CPMS? 2010-03-04 17:37:40,7, GSM1: Command is sent, waiting for the answer 2010-03-04 17:37:46,7, GSM1: put_command expected (\+CPMS:.*OK)|(ERROR), timeout occurred. 2. 2010-03-04 17:37:46,7, GSM1: <- 2010-03-04 17:37:46,6, GSM1: Command failed. 2010-03-04 17:37:46,6, GSM1: No SMS received (reading interrupted) 2010-03-04 17:37:56,6, GSM1: Checking device for incoming SMS 2010-03-04 17:37:56,6, GSM1: Checking if modem is ready 2010-03-04 17:37:56,7, GSM1: -> AT 2010-03-04 17:37:56,7, GSM1: Command is sent, waiting for the answer 2010-03-04 17:38:03,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred.

For some reason your device does not answer when CPMS? is asked. Perhaps this is because preferred message storage was not set.

Test this issue using a communication mode of smsd:

Stop the smsd if it's running.
Start it with smsd -C GSM1. Follow the instructions on screen.

Type ATE1 (and Enter) to set echo on.

Use the following commands:

AT+CPMS=? to get a list of storages.

AT+CPMS="SM" to select SIM.

AT+CPMS? to see if there are messages.

AT+CPMS="ME" to select mobile equipment.

AT+CPMS? to see if there are messages.

Show the result of a communication here.