| Author |
Post |
|
|
#1 Mon May 31, 2010 04:48, 176 months ago.
|
|
Member
Registered:
May 2010
Location: sichuan chengdu, China
|
Operating system name and version: Linux version 2.6.24-19-generic,Ubuntu 4.2.3-2ubuntu7 Version of smsd: smstools3-3.1.8 Smsd installed from: sources Name and model of a modem / phone: GSM MODEM Interface: USB Please excuse for my poor english. I am a common chinese coder. The problem was that I send a short messge by using command "sendsms 8613708203321 '测试'". when my phone received this message, I saw the content was Mis-coding/Disorderly code,like 'au@e'. the smsd.conf was Can you tell me what can I do. thanks
|
|
|
#2 Mon May 31, 2010 06:51, 176 months ago.
|
|
Member
Registered:
May 2010
Location: Russian Federation
|
sendsms is designed to work with 7bit ascii only. you need something like this: #!/bin/sh
FILE=`mktemp /tmp/smsd_XXXXXX`
DEST=$1
TEXT=$2
if [ -z "$DEST" ]; then
printf "Destination: "
read DEST
fi
if [ -z "$TEXT" ]; then
printf "Text: "
read TEXT
fi
echo "To: $DEST" >> $FILE
echo "Alphabet: UCS" >> $FILE
echo "" >> $FILE
echo -n "$TEXT" | iconv -t ucs-2be >> $FILE
chmod 644 $FILE
mv $FILE /var/spool/sms/outgoing/ 'bash' Syntax Highlight powered by GeSHi ps: sorry, i don't test this script  |
|
|
#3 Mon May 31, 2010 08:41, 176 months ago.
|
|
Member
Registered:
May 2010
Location: sichuan chengdu, China
Topic owner
|
edo wrote sendsms is designed to work with 7bit ascii only. you need something like this: #!/bin/sh
FILE=`mktemp /tmp/smsd_XXXXXX`
DEST=$1
TEXT=$2
if [ -z "$DEST" ]; then
printf "Destination: "
read DEST
fi
if [ -z "$TEXT" ]; then
printf "Text: "
read TEXT
fi
echo "To: $DEST" >> $FILE
echo "Alphabet: UCS" >> $FILE
echo "" >> $FILE
echo -n "$TEXT" | iconv -t ucs-2be >> $FILE
chmod 644 $FILE
mv $FILE /var/spool/sms/outgoing/ 'bash' Syntax Highlight powered by GeSHi ps: sorry, i don't test this script
 I create a new file named out-convert.pl with your script. and edit the smsd.conf,add one line with 'checkhandler = /bin/smsd/out-convert.pl'. when I execute the command with '/etc/init.d/sms3 start', I get the arguments $1,$2 is '/var/spool/sms/outgoing/send_B16223' and empty. |
|
|
#4 Mon May 31, 2010 08:45, 176 months ago.
|
|
Member
Registered:
May 2010
Location: Russian Federation
|
it is not "checkhandler", but standalone script like original sendsms. save this file as /usr/local/bin/sendsms-ucs and call "sendsms-ucs 8613708203321 '测试'" « Last edit by edo on Mon May 31, 2010 08:47, 176 months ago. » |
|
|
#5 Mon May 31, 2010 09:46, 176 months ago.
|
|
Member
Registered:
May 2010
Location: sichuan chengdu, China
Topic owner
|
It`s done. Thanks, edo. And what can I do that I use checkhandler. how can I convert the outgoing files character set the text only. If I use It will failed. the error is 'No destination in file /var/spool/sms/outgoing/send_001'. Thank you. |
|
|
#6 Mon May 31, 2010 09:59, 176 months ago.
|
|
Member
Registered:
May 2010
Location: Russian Federation
|
you recode not only mesaage body, but all message including headers (like "To:").
|
|
|
#7 Mon May 31, 2010 10:03, 176 months ago.
|
|
Member
Registered:
May 2010
Location: sichuan chengdu, China
Topic owner
|
yes , but what can I recode the text part not all pary.
|
|
|
#8 Mon May 31, 2010 10:16, 176 months ago.
|
|
Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
|
See this post, it contains a sample checkhandler. If you do the character set conversion in the sendsms-ucs script, you do not need a checkhandler. But you could modify the sendsms-ucs script: remove the iconv and write a header " Alphabet: UTF-8" to the file. Then that checkhandler will do the conversion. You can also create a message file with an editor, and the checkhandler will convert message to UCS if that header exists. |
|
|
#9 Tue Jun 01, 2010 02:36, 176 months ago.
|
|
Member
Registered:
May 2010
Location: sichuan chengdu, China
Topic owner
|
Thank you keke . It works good.
|
|
|
#10 Tue Jun 01, 2010 09:19, 176 months ago.
|
|
Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
|
These changes will do the automatic detection of character set used, and makes the script sendsms compatible with Unicode: echo "-- "
echo "Text: $TEXT"
ALPHABET=""
if which iconv > /dev/null 2>&1; then
if ! $ECHO -n "$TEXT" | iconv -t ISO-8859-15 >/dev/null 2>&1; then
ALPHABET="Alphabet: UCS"
fi
fi
and:
$ECHO "To: $destination" >> $TMPFILE
[ -n "$ALPHABET" ] && $ECHO "$ALPHABET" >> $TMPFILE
$ECHO "" >> $TMPFILE
if [ -z "$ALPHABET" ]; then
$ECHO -n "$TEXT" >> $TMPFILE
else
$ECHO -n "$TEXT" | iconv -t UNICODEBIG >> $TMPFILE
fi
Hopefully you can test it. The checkhandler is not required, but could be used with messages created with an editor. |
|
|
#11 Tue Jun 01, 2010 09:19, 176 months ago.
|
|
Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
|
Here is the complete script with changes: #!/bin/bash
# This script send a text sms at the command line by creating
# a sms file in the outgoing queue.
# $1 is the destination phone number.
# $2 is the message text.
# If you leave $2 or both empty, the script will ask you.
# If you give more than 2 arguments, last is taken as a text and
# all other are taken as destination numbers.
# If a destination is asked, you can type multiple numbers
# delimited with spaces.
# Keys for example: "password" and "keke":
# KEYS="5f4dcc3b5aa765d61d8327deb882cf99 4a5ea11b030ec1cfbc8b9947fdf2c872 "
KEYS=""
# When creating keys, remember to use -n for echo:
# echo -n "key" | md5sum
smsd_user="smsd"
# Will need echo which accepts -n argument:
ECHO=echo
case `uname` in
SunOS)
ECHO=/usr/ucb/echo
;;
esac
if ! [ -z "$KEYS" ]; then
printf "Key: "
read KEY
if [ -z "$KEY" ]; then
echo "Key required, stopping."
exit 1
fi
KEY=`$ECHO -n "$KEY" | md5sum | awk '{print $1;}'`
if ! echo "$KEYS" | grep "$KEY" >/dev/null; then
echo "Incorrect key, stopping."
exit 1
fi
fi
DEST=$1
TEXT=$2
if [ -z "$DEST" ]; then
printf "Destination(s): "
read DEST
if [ -z "$DEST" ]; then
echo "No destination, stopping."
exit 1
fi
fi
if [ -z "$TEXT" ]; then
printf "Text: "
read TEXT
if [ -z "$TEXT" ]; then
echo "No text, stopping."
exit 1
fi
fi
if [ $# -gt 2 ]; then
n=$#
while [ $n -gt 1 ]; do
destinations="$destinations $1"
shift
n=`expr $n - 1`
done
TEXT=$1
else
destinations=$DEST
fi
echo "-- "
echo "Text: $TEXT"
ALPHABET=""
if which iconv > /dev/null 2>&1; then
if ! $ECHO -n "$TEXT" | iconv -t ISO-8859-15 >/dev/null 2>&1; then
ALPHABET="Alphabet: UCS"
fi
fi
owner=""
if [ -f /etc/passwd ]; then
if grep $smsd_user: /etc/passwd >/dev/null; then
owner=$smsd_user
fi
fi
for destination in $destinations
do
echo "To: $destination"
TMPFILE=`mktemp /tmp/smsd_XXXXXX`
$ECHO "To: $destination" >> $TMPFILE
[ -n "$ALPHABET" ] && $ECHO "$ALPHABET" >> $TMPFILE
$ECHO "" >> $TMPFILE
if [ -z "$ALPHABET" ]; then
$ECHO -n "$TEXT" >> $TMPFILE
else
$ECHO -n "$TEXT" | iconv -t UNICODEBIG >> $TMPFILE
fi
if [ "x$owner" != x ]; then
chown $owner $TMPFILE
fi
FILE=`mktemp /var/spool/sms/outgoing/send_XXXXXX`
mv $TMPFILE $FILE
done
'bash' Syntax Highlight powered by GeSHi |
