Author |
Post |
|
#1 Fri Apr 15, 2011 11:21, 158 months ago.
|
Member
Registered: Apr 2010
Location: Portugal
|
Operating system name and version: Fedora14 Version of smsd: 3.1.14 Smsd installed from: sources Name and model of a modem / phone: Huawei E220 Interface: USB
Hello support.
I don't know why, but I'm unable to get the saldo.
Here is the conf: regular_run_loglevel = debug regular_run_interval = 5 regular_run_cmdfile = /var/spool/sms/command/MODEM1c regular_run_post_run = /var/spool/sms/command/MODEM1pr regular_run_statfile = /var/spool/sms/MODEM1s
Here is the MODEM1c: [(OK)|(OK +CUSD)|(ERROR)|(.*)]AT+CUSD=1,"*102#"
Here is the MODEMs: 2011-04-15 12:14:58,5, MODEM1: CMD: [(OK)|(OK +CUSD)|(ERROR)|(.*)]AT+CUSD=1,"*102#": OK
Here is the log: 2011-04-15 12:14:58,7, MODEM1: -> AT+CUSD=1,"*102#" 2011-04-15 12:14:58,7, MODEM1: Command is sent, waiting for the answer 2011-04-15 12:14:58,7, MODEM1: <- OK 2011-04-15 12:14:58,7, MODEM1: CMD: [(OK)|(OK +CUSD)|(ERROR)|(.*)]AT+CUSD=1,"*102#": OK
From my phone, I'm able to get the answer I was expecting.
Can you tell me why the OK and not the whole answer?
Best regards, Carlos
|
|
#2 Fri Apr 15, 2011 12:14, 158 months ago.
|
Administrator
Registered: May 2009
Location: Jyväskylä, Finland
|
You could try with a command AT+CUSD=1,"*102#",0; or AT+CUSD=1,"*102#",15; if it makes a difference. In your previous posting ( [answered] Saldo) you used the same command as now. Was the command working then? After that posting a new script is published, probably this is interesting for you: Sample config and script for regular_run and balance of prepaid SIM using USSD.
|
|
#3 Fri Apr 15, 2011 12:21, 158 months ago.
|
Member
Registered: Apr 2010
Location: Portugal
Topic owner
|
Hello.
Yes, it remember it worked back then. But I never tried any more. I already saw the script, but in order to "parse" it I need to know the result from the operator.
I'm not sure, but can it be because now the regular_run_cmdfile expects a particular returned value (http://smstools3.kekekasvi.com/index.php?p=configure#m_regular_run_cmdfile)?
Best regards, Carlos
|
|
#4 Fri Apr 15, 2011 12:36, 158 months ago.
|
Administrator
Registered: May 2009
Location: Jyväskylä, Finland
|
You could try the USSD command manually, using Minicom or smsd -C modemname.
|
|
#5 Fri Apr 15, 2011 15:26, 158 months ago.
|
Member
Registered: Apr 2010
Location: Portugal
Topic owner
|
Hello.
Well... not a big development...
Communicating with MODEM1. ( Press Ctrl-C to abort. ) ( If you need to send Ctrl-Z, change the suspend character first, like stty susp \^N ) Default device is /dev/serial/by-id/usb-HUAWEI_Technologies_HUAWEI_Mobile-if00-port0 Press Enter to start or type an another device name.
Opening device /dev/serial/by-id/usb-HUAWEI_Technologies_HUAWEI_Mobile-if00-port0 Ready.
+CPIN: READY
OK
OK
Any other suggestion?
Carlos
|
|
#6 Fri Apr 15, 2011 16:52, 158 months ago.
|
Administrator
Registered: May 2009
Location: Jyväskylä, Finland
|
I forgot to say that first set "echo on" with ATE1 . Anyways, to some USSD command the answer was just OK. Did you try ",0;" or ",15;" variations? I do not have other suggestions. As the command worked 12 months ago, you just need to remember what was the format which was working.
|
|
#7 Sat Apr 16, 2011 19:35, 158 months ago.
|
Member
Registered: Apr 2010
Location: Portugal
Topic owner
|
Hello.
Still no answer from "saldo request". I don't know if it is related or not, but I'm also unable do receive sms reports (receive confirmations). Is that a clue for what is happening?
Carlos
|
|
#8 Sun Apr 17, 2011 07:52, 158 months ago.
|
Member
Registered: Apr 2010
Location: Portugal
Topic owner
|
Hello.
I tried with another modem (different vender/model) and works fine. Can It be a miss configuration of the modem? The modem that is not working is a Huawei H220, and the smsd.conf is:
[MODEM1] outgoing = yes incoming = yes pin = 1111 memory_start = 0 check_memory_method = 2 signal_quality_ber_ignore = yes pre_init = yes init = AT^CURC=0 init2 = AT^BOOT=0,0 detect_unexpected_input = yes device = /dev/serial/by-id/usb-HUAWEI_Technologies_HUAWEI_Mobile-if00-port0
Any clue?
Carlos
|
|
#9 Sun Apr 17, 2011 09:55, 158 months ago.
|
Administrator
Registered: May 2009
Location: Jyväskylä, Finland
|
Your E220 is bad or broken. As the status report also does not work properly, just throw E220 away and continue with another modem.
|