SMS Server Tools 3
This site is hosted by Kekekasvi.com
 Menu
Basic information:
Additional information:
Support:
Get SMS Server Tools 3:
Additional Options

 Sponsored links

 Search
Custom Search

 Visitor locations
 
 SMS Server Tools 3 Community
Welcome, Guest. Please login or register. Mon Mar 01, 2021 13:42
SMSTools3 Community » Help and support Bottom

[solved] getting status report

  This topic is locked

Page:  1

Author Post
Member
Registered:
Apr 2011
Location: Switzerland
Operating system name and version: Linux - ubuntu 10.04
Version of smsd: 3.1.6
Smsd installed from: package repository
Name and model of a modem / phone: SIM300 (from SIMCOM)
Interface: serial

Hello,

I am trying to get a status report for the SMS being sent by smstools but in vain.
I have tried to set this in the configuration file as well as the sms file itself, but neither ways was successful!
I would like to debug this but I have no clue on how to proceed. I have tried to enable logging level to loglevel = 7 but the information I got was not helpful.

Any help would be greatly appreciated.

lbh

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
First, if your Ubuntu is 64bit edition, and runs on Intel processor, you have to upgrade smsd. On maverick there is 3.1.10 available, and on natty there is 3.1.11.

Also, you need to upgrade, because later versions have a modem setting report_device_details = yes available.

It would useful to see those "device details" from the log. Those details will tell the exact version of the modem, available memories and list of supported modes for new message indications.

Also, show what settings you have already tried, if something more than "report = yes".

I assume that normal sending and receiving works fine, is this correct?

Member
Registered:
Apr 2011
Location: Switzerland
Topic owner
Hello!

Thanks for the swift reply.

I am actually more interested in having it running on a Linux (BusyBox v1.11.0). I will upgrade to the newest stable version and get back with more information.

Yes the only settings I did was report = yes (in both the configuration file and the sms file)

Regards
lbh

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
Check this new topic: SIM300 and report feature.

Member
Registered:
Apr 2011
Location: Switzerland
Topic owner
Hello,

thanks for pointing me to this.
I have set the config file to have init = AT+CNMI=2,1,0,1,0
This seems to work on my side, here is parts of my log when I sent an sms with a request to get a status report back:

2011-05-03 23:02:30,6, GSM1: Checking if modem is ready
2011-05-03 23:02:31,3, GSM1: Routed status report detected:
+CDS: 25.
07911497949900F006860B911497674673F8115030224522801150302245528000.

2011-05-03 23:02:31,3, GSM1: Saved routed status report for later handling. However, you MUST DISABLE status report routing with modem settings.
2011-05-03 23:02:31,7, GSM1: Sending acknowledgement
2011-05-03 23:02:31,7, GSM1: -> AT+CNMA
2011-05-03 23:02:31,7, GSM1: <- ERROR



looks like I have to disable CNMA, but for this I need to upgrade first as I am still on 3.1.6

Once I have the complete setup updated I will re-conduct the test and will let you know

Regards and thanks for all the help
lbh

Member
Registered:
Apr 2011
Location: Switzerland
Topic owner
Hello,

I have currently upgraded to version 3.1.14 and with the setting

init = AT+CNMI=2,1,0,1,0
in the config file I now receive a report in the specified folder for reports.

Thanks for all the help
I guess we can flag this ticket as solved.

lbh

  This topic is locked

Page:  1

SMSTools3 Community » Help and support Top

 
Time in this board is UTC.  

Privacy Policy   SMS Server Tools 3 Copyright © Keijo Kasvi.