Operating system name and version: Ubuntu (wubi - Windows installer)
Version of smsd: smstools3-3.1.14.tar.gz
Smsd installed from: sources
Name and model of a modem / phone: Huawei E1552
Interface: USB

Hello, I have been working on it for almost a month now and still I can't get it to work. I am using an Ubuntu (Wubi - Windows installer) and a Huawei E1552. Below is my smsd.conf and log.



2012-01-07 04:27:34,2, smsd: Smsd v3.1.14 started. 2012-01-07 04:27:34,2, smsd: Running as root:root. 2012-01-07 04:27:34,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.TlZ567 /tmp/smsd_data.I6H3zg 2012-01-07 04:27:34,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0) 2012-01-07 04:27:34,4, smsd: File mode creation mask: 022 (0644, rw-r--r--). 2012-01-07 04:27:34,5, smsd: Outgoing file checker has started. PID: 7268. 2012-01-07 04:27:34,5, GSM1: Modem handler 0 has started. PID: 7269. Will only send messages. 2012-01-07 04:27:34,7, smsd: All PID's: 7268,7269 2012-01-07 04:27:34,3, GSM1: Baudrate 9200 not supported, using 19200 2012-01-07 04:27:34,6, GSM1: Checking if modem is ready 2012-01-07 04:27:34,7, GSM1: -> AT 2012-01-07 04:27:34,7, GSM1: Command is sent, waiting for the answer 2012-01-07 04:27:35,7, GSM1: <- OK 2012-01-07 04:27:35,6, GSM1: Pre-initializing modem 2012-01-07 04:27:35,7, GSM1: -> ATE0+CMEE=1;+CREG=2 2012-01-07 04:27:35,7, GSM1: Command is sent, waiting for the answer 2012-01-07 04:27:35,7, GSM1: <- OK 2012-01-07 04:27:35,6, GSM1: Checking if modem needs PIN 2012-01-07 04:27:35,7, GSM1: -> AT+CPIN? 2012-01-07 04:27:35,7, GSM1: Command is sent, waiting for the answer 2012-01-07 04:27:36,7, GSM1: <- +CPIN: READY OK 2012-01-07 04:27:36,6, GSM1: Initializing modem 2012-01-07 04:27:36,7, GSM1: -> AT^CURC=0 2012-01-07 04:27:36,7, GSM1: Command is sent, waiting for the answer 2012-01-07 04:27:36,7, GSM1: <- OK 2012-01-07 04:27:36,7, GSM1: -> AT+CSQ 2012-01-07 04:27:36,7, GSM1: Command is sent, waiting for the answer 2012-01-07 04:27:37,7, GSM1: <- +CSQ: 15,99 OK 2012-01-07 04:27:37,6, GSM1: Signal Strength Indicator: (15,99) -83 dBm (Good) 2012-01-07 04:27:37,6, GSM1: Checking if Modem is registered to the network 2012-01-07 04:27:37,7, GSM1: -> AT+CREG? 2012-01-07 04:27:37,7, GSM1: Command is sent, waiting for the answer 2012-01-07 04:27:37,7, GSM1: <- +CREG: 2,1,C95,35DA OK 2012-01-07 04:27:37,6, GSM1: Modem is registered to the network 2012-01-07 04:27:37,6, GSM1: Location area code: C95, Cell ID: 35DA 2012-01-07 04:27:37,7, GSM1: -> AT+CSQ 2012-01-07 04:27:37,7, GSM1: Command is sent, waiting for the answer 2012-01-07 04:27:38,7, GSM1: <- +CSQ: 15,99 OK 2012-01-07 04:27:38,6, GSM1: Signal Strength Indicator: (15,99) -83 dBm (Good) 2012-01-07 04:27:38,6, GSM1: Selecting PDU mode 2012-01-07 04:27:38,7, GSM1: -> AT+CMGF=0 2012-01-07 04:27:38,7, GSM1: Command is sent, waiting for the answer 2012-01-07 04:27:38,7, GSM1: <- OK 2012-01-07 04:27:38,6, GSM1: Changing SMSC 2012-01-07 04:27:38,7, GSM1: -> AT+CSCA="+639170000130" 2012-01-07 04:27:38,7, GSM1: Command is sent, waiting for the answer 2012-01-07 04:27:39,7, GSM1: <- OK 2012-01-07 04:27:39,7, GSM1: -> AT+CIMI 2012-01-07 04:27:39,7, GSM1: Command is sent, waiting for the answer 2012-01-07 04:27:39,7, GSM1: <- 515021009410644 OK 2012-01-07 04:27:39,7, GSM1: -> AT+CGSN 2012-01-07 04:27:39,7, GSM1: Command is sent, waiting for the answer 2012-01-07 04:27:40,7, GSM1: <- 353143034214610 OK 2012-01-07 04:27:40,5, GSM1: CGSN: 353143034214610 2012-01-07 04:27:40,5, GSM1: IMSI: 515021009410644 2012-01-07 04:27:40,7, GSM1: ## Start of device details 2012-01-07 04:27:40,7, GSM1: # Manufacturer identification: 2012-01-07 04:27:40,7, GSM1: -> AT+CGMI 2012-01-07 04:27:40,7, GSM1: <- huawei OK 2012-01-07 04:27:40,7, GSM1: # Model identification: 2012-01-07 04:27:40,7, GSM1: -> AT+CGMM 2012-01-07 04:27:41,7, GSM1: <- E1552 OK 2012-01-07 04:27:41,7, GSM1: # Revision identification: 2012-01-07 04:27:41,7, GSM1: -> AT+CGMR 2012-01-07 04:27:41,7, GSM1: <- 11.608.10.00.00 OK 2012-01-07 04:27:41,7, GSM1: # New message indications, list of supported modes: 2012-01-07 04:27:41,7, GSM1: -> AT+CNMI=? 2012-01-07 04:27:42,7, GSM1: <- +CNMI: (0,1,2),(0,1,2,3),(0,2),(0,1,2),(0,1) OK 2012-01-07 04:27:42,7, GSM1: # New message indications, current settings: 2012-01-07 04:27:42,7, GSM1: -> AT+CNMI? 2012-01-07 04:27:42,7, GSM1: <- +CNMI: 0,0,0,0,0 OK 2012-01-07 04:27:42,7, GSM1: # Preferred message storage, list of supported mem's: 2012-01-07 04:27:42,7, GSM1: -> AT+CPMS=? 2012-01-07 04:27:43,7, GSM1: <- +CPMS: ("ME","MT","SM","SR"),("ME","MT","SM","SR"),("ME","MT","SM","SR") OK 2012-01-07 04:27:43,7, GSM1: # Phonebook storage, available mem's: 2012-01-07 04:27:43,7, GSM1: -> AT+CPBS=? 2012-01-07 04:27:43,7, GSM1: <- +CPBS: ("SM","EN","ON") OK 2012-01-07 04:27:43,7, GSM1: # List messages, list of supported stat's: 2012-01-07 04:27:43,7, GSM1: -> AT+CMGL=? 2012-01-07 04:27:44,7, GSM1: <- +CMGL: (0-4) OK 2012-01-07 04:27:44,7, GSM1: # Delete message, list of supported values: 2012-01-07 04:27:44,7, GSM1: -> AT+CMGD=? 2012-01-07 04:27:44,7, GSM1: <- +CMGD: (0,1,2,3,4,5,6,7,8,10,11,12,13,14,21,23,24,25,26,27,28,30,32,33,34,36,37),(0-4) OK 2012-01-07 04:27:44,7, GSM1: # Phone activity status, list of supported stat's: 2012-01-07 04:27:44,7, GSM1: -> AT+CPAS=? 2012-01-07 04:27:45,7, GSM1: <- +CPAS: (0,3,4) OK 2012-01-07 04:27:45,7, GSM1: # TE character set, list of supported charset's: 2012-01-07 04:27:45,7, GSM1: -> AT+CSCS=? 2012-01-07 04:27:45,7, GSM1: <- +CSCS: ("IRA","GSM","UCS2") OK 2012-01-07 04:27:45,7, GSM1: # TE character set, current setting: 2012-01-07 04:27:45,7, GSM1: -> AT+CSCS? 2012-01-07 04:27:46,7, GSM1: <- +CSCS: "IRA" OK 2012-01-07 04:27:46,7, GSM1: ## End of device details 2012-01-07 04:27:46,5, GSM1: Waiting for messages to send...

This is my command when sending message. sendsms 639170000101 'Test'

As you can see on the log, no sending of message is happening. What could be the possible reason htat causes this problem? Is it hardware compatibility issues? Receiving is not a problem as it works fine. I searched on the forum and no one seems having the same problem with mine. Any brilliant ideas would be much appreciated. Thanks in advance.

Already figured out what causes this problem. It was a permission issue. When invoking sendsms command as root, the file created in outgoing directory was owned by root and has 600 permission. This is why smsd stack at "Waiting for messages to send..." message because it can't move the file from outgoing to checked directory.

Hope this will help to those having this issue also. Cheers!