Operating system name and version: Ubuntu 12.04 Desktop
Version of smsd: 3.1.15
Smsd installed from: sources
Name and model of a modem / phone: Wavecom Q2303A Module COM/RS232/Serial Port
Interface: Serial to USB Converter

Hi good eve. Is there anyone in the community made Wavecom Q2303A working for SMS Tools 3?

Thanks!

It seems that two users are using this modem. It works with simple settings.

Hi sorry keke,

when you say Q2303A uses simple settings, do you mean

[GSM1] device = @obfuscated_ip:4001 incoming = high read_timeout = 15

should be enough? (We seem to need a read_timeout for the internet connection, which is

Hidden private text.

)

We are trying to use this modem through a Moxa nport box, but are just getting the following code, even when we pushed the baudrate on the moxa down to 300.

2013-07-29 15:52:55,7, GSM1: Command is sent, waiting for the answer 2013-07-29 15:53:10,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 2. 2013-07-29 15:53:10,7, GSM1: <- 2013-07-29 15:53:10,7, GSM1: -> AT

cheers

Ben

Yes Ben, keke is correct. It works with a simple settings - simple settings with a minor tweaks.

I just installed minicom on my Ubuntu (just google minicom for reference if you don't know minicom). Use minicom to set the baudrate at 9600.

Back to your smsd.conf and also set the baudrate at 9600.

Hope that helps! Cheers!


Regards,

Rustan

Thanks Rustan,

I will try this - I'm concerned that the problem is the cable going from the Modem into the Moxa Nport, but it's certainly worth a try - I'll have to get closer to the boxes, which won't be for a week or so.

cheers

Ben