SMS Server Tools 3
This site is hosted by Kekekasvi.com
 Menu
Basic information:
Additional information:
Support:
Get SMS Server Tools 3:
Additional Options

 Sponsored links

 Search
Custom Search

 Visitor locations
 
 SMS Server Tools 3 Community
Welcome, Guest. Please login or register. Fri Mar 29, 2024 10:20
SMSTools3 Community » Help and support Bottom

Cannot send SMS anymore, since 2 days

Login and Post Reply

Page:  1

Author Post
Member
Registered:
Jan 2015
Location: France
Operating system name and version: Raspbian @ RaspberryPi
Version of smsd: v3.1.14
Smsd installed from: apt-get
Name and model of a modem / phone: Huawei E160E
Interface: USB

Hi,

Since 2 days, my sms server tools stop sending SMS. I don't understand why. I put the loglevel to 7 to see if I can understand something from the log but I can't even understood them..

Reception is OK, but I cannot send any SMS.


This is the log output :

2015-01-19 11:46:29,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/vsjarqflcjtnhdlbfniufafftbrasl
2015-01-19 11:46:29,6, GSM1: Checking device for incoming SMS
2015-01-19 11:46:29,6, GSM1: Checking if modem is ready
2015-01-19 11:46:30,7, GSM1: -> AT
2015-01-19 11:46:30,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:30,7, GSM1: <- OK
2015-01-19 11:46:30,6, GSM1: Pre-initializing modem
2015-01-19 11:46:30,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2015-01-19 11:46:30,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:30,7, GSM1: <- OK
2015-01-19 11:46:30,6, GSM1: Checking if modem needs PIN
2015-01-19 11:46:31,7, GSM1: -> AT+CPIN?
2015-01-19 11:46:31,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:31,7, GSM1: <- +CPIN: READY OK
2015-01-19 11:46:31,6, GSM1: Initializing modem
2015-01-19 11:46:31,7, GSM1: -> AT+CPMS="SM"
2015-01-19 11:46:31,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:31,7, GSM1: <- +CPMS: 1,50,1,50,1,50 OK
2015-01-19 11:46:32,7, GSM1: -> AT+CSQ
2015-01-19 11:46:32,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:32,7, GSM1: <- +CSQ: 17,99 OK
2015-01-19 11:46:32,6, GSM1: Signal Strength Indicator: (17,99) -79 dBm (Good), Bit Error Rate: not known or not detectable
2015-01-19 11:46:32,6, GSM1: Checking if Modem is registered to the network
2015-01-19 11:46:32,7, GSM1: -> AT+CREG?
2015-01-19 11:46:32,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:32,7, GSM1: <- +CREG: 2,1,F52,5D OK
2015-01-19 11:46:32,6, GSM1: Modem is registered to the network
2015-01-19 11:46:32,6, GSM1: Selecting PDU mode
2015-01-19 11:46:32,7, GSM1: -> AT+CMGF=0
2015-01-19 11:46:32,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:33,7, GSM1: <- OK
2015-01-19 11:46:33,6, GSM1: Checking memory size
2015-01-19 11:46:33,7, GSM1: -> AT+CPMS?
2015-01-19 11:46:33,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:33,7, GSM1: <- +CPMS: "SM",1,50,"SM",1,50,"SM",1,50 OK
2015-01-19 11:46:33,6, GSM1: Used memory is 1 of 50
2015-01-19 11:46:33,6, GSM1: Trying to get stored message 1
2015-01-19 11:46:33,7, GSM1: -> AT+CMGR=1
2015-01-19 11:46:33,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:34,7, GSM1: <- OK
2015-01-19 11:46:34,6, GSM1: No SMS received (reading interrupted)
2015-01-19 11:46:34,6, GSM1: Sending SMS from to 33663813252
2015-01-19 11:46:34,6, GSM1: Checking if modem is ready
2015-01-19 11:46:34,7, GSM1: -> AT
2015-01-19 11:46:34,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:34,7, GSM1: <- OK
2015-01-19 11:46:34,6, GSM1: Pre-initializing modem
2015-01-19 11:46:34,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2015-01-19 11:46:34,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:35,7, GSM1: <- OK
2015-01-19 11:46:35,6, GSM1: Checking if modem needs PIN
2015-01-19 11:46:35,7, GSM1: -> AT+CPIN?
2015-01-19 11:46:35,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:35,7, GSM1: <- +CPIN: READY OK
2015-01-19 11:46:35,6, GSM1: Initializing modem
2015-01-19 11:46:35,7, GSM1: -> AT+CPMS="SM"
2015-01-19 11:46:35,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:36,7, GSM1: <- +CPMS: 1,50,1,50,1,50 OK
2015-01-19 11:46:36,7, GSM1: -> AT+CSQ
2015-01-19 11:46:36,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:36,7, GSM1: <- +CSQ: 17,99 OK
2015-01-19 11:46:36,6, GSM1: Signal Strength Indicator: (17,99) -79 dBm (Good), Bit Error Rate: not known or not detectable
2015-01-19 11:46:36,6, GSM1: Checking if Modem is registered to the network
2015-01-19 11:46:36,7, GSM1: -> AT+CREG?
2015-01-19 11:46:36,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:37,7, GSM1: <- +CREG: 2,1,F52,5D OK
2015-01-19 11:46:37,6, GSM1: Modem is registered to the network
2015-01-19 11:46:37,6, GSM1: Selecting PDU mode
2015-01-19 11:46:37,7, GSM1: -> AT+CMGF=0
2015-01-19 11:46:37,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:37,7, GSM1: <- OK
2015-01-19 11:46:37,7, GSM1: -> AT+CMGS=83
2015-01-19 11:46:37,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:46:38,7, GSM1: <- >
2015-01-19 11:46:38,7, GSM1: -> 0011000B913366833152F20000FF4ECC32685E96DBCB7539889D76D7F1AE72EB4DCECFE7E5BCCB5DA683DC6590BC007FBBC973109C5D9F83C865783D3D07B1CBA058EE058BBD64B0580D0483E962351D2C060A01
2015-01-19 11:46:38,7, GSM1: Command is sent, waiting for the answer
root@rasp:/etc# tail -f /var/log/smstools/smsd.log~
tail: impossible d'ouvrir « /var/log/smstools/smsd.log~ » en lecture: Aucun fichier ou dossier de ce type
root@rasp:/etc# tail -f /var/log/smstools/smsd.log
2015-01-19 11:47:20,7, GSM1: <- +CPIN: READY OK
2015-01-19 11:47:20,6, GSM1: Initializing modem
2015-01-19 11:47:20,7, GSM1: -> AT+CPMS="SM"
2015-01-19 11:47:20,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:47:20,7, GSM1: <- +CPMS: 1,50,1,50,1,50 OK
2015-01-19 11:47:20,7, GSM1: -> AT+CSQ
2015-01-19 11:47:20,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:47:21,7, GSM1: <- +CSQ: 17,99 OK
2015-01-19 11:47:21,6, GSM1: Signal Strength Indicator: (17,99) -79 dBm (Good), Bit Error Rate: not known or not detectable
2015-01-19 11:47:21,6, GSM1: Checking if Modem is registered to the network
2015-01-19 11:47:21,7, GSM1: -> AT+CREG?
2015-01-19 11:47:21,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:47:21,7, GSM1: <- +CREG: 2,1,F52,5D OK
2015-01-19 11:47:21,6, GSM1: Modem is registered to the network
2015-01-19 11:47:21,6, GSM1: Selecting PDU mode
2015-01-19 11:47:21,7, GSM1: -> AT+CMGF=0
2015-01-19 11:47:21,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:47:22,7, GSM1: <- OK
2015-01-19 11:47:22,7, GSM1: -> AT+CMGS=83
2015-01-19 11:47:22,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:47:22,7, GSM1: <- >
2015-01-19 11:47:22,7, GSM1: -> 0011000B913366833152F20000FF4ECC32685E96DBCB7539889D76D7F1AE72EB4DCECFE7E5BCCB5DA683DC6590BC007FBBC973109C5D9F83C865783D3D07B1CBA058EE058BBD64B0580D0483E962351D2C060A01
2015-01-19 11:47:22,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:47:53,7, GSM1: <- +CMS ERROR: 500 (Unknown error)
2015-01-19 11:47:53,3, GSM1: The modem answer was not OK: +CMS ERROR: 500 (Unknown error)
2015-01-19 11:47:53,5, GSM1: Waiting 10 sec. before retrying
2015-01-19 11:48:03,6, GSM1: Checking if modem is ready
2015-01-19 11:48:03,7, GSM1: -> AT
2015-01-19 11:48:03,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:48:03,7, GSM1: <- OK
2015-01-19 11:48:03,6, GSM1: Pre-initializing modem
2015-01-19 11:48:03,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2015-01-19 11:48:03,7, GSM1: Command is sent, waiting for the answer
2015-01-19 11:48:03,7, GSM1: <- OK


Thanks to people who will try to help me.

Coom

PS: Please excuse my english which is horrible because it's not my native language :oops:


« Last edit by coom on Mon Jan 19, 2015 10:59, 111 months ago. »
Member
Registered:
Jun 2015
Location: East Timor
Exactly the same problem here (same OS, same device, same modem, only slightly newer version of sms server tools, 3.1.15). It just doesn't send SMS anymore and fails in exactly the same way as described in your log. :'( Did you manage to solve the problem?

Greetz

Login and Post Reply

Page:  1

SMSTools3 Community » Help and support Top

 
Time in this board is UTC.  

Privacy Policy   SMS Server Tools 3 Copyright © Keijo Kasvi.