SMSTools3 Help and support

#1 Mon Oct 10, 2016 16:32, 91 months ago.

Member

Registered:
Oct 2016

Location: Austria

Operating system name and version: Debian 8.6
Version of smsd: 3.1.5
Smsd installed from: Debian package repository
Name and model of a modem / phone: Ericsson F3507g
Interface: mPCIe

Output smsd.log:

GSM1: Modem handler 0 has started. PID: 11534. Will only send messages.
2016-10-10 18:28:04,6, GSM1: Checking if modem is ready
2016-10-10 18:28:04,7, GSM1: -> AT
2016-10-10 18:28:04,7, GSM1: Command is sent, waiting for the answer
2016-10-10 18:28:04,7, GSM1: <- OK
2016-10-10 18:28:04,6, GSM1: Pre-initializing modem
2016-10-10 18:28:04,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2016-10-10 18:28:04,7, GSM1: Command is sent, waiting for the answer
2016-10-10 18:28:05,7, GSM1: <- OK
2016-10-10 18:28:05,6, GSM1: Checking if modem needs PIN
2016-10-10 18:28:05,7, GSM1: -> AT+CPIN?
2016-10-10 18:28:05,7, GSM1: Command is sent, waiting for the answer
2016-10-10 18:28:05,7, GSM1: <- +CPIN: READY OK
2016-10-10 18:28:05,6, GSM1: Initializing modem
2016-10-10 18:28:05,7, GSM1: -> AT+CFUN=1
2016-10-10 18:28:05,7, GSM1: Command is sent, waiting for the answer
2016-10-10 18:28:06,7, GSM1: <- OK
2016-10-10 18:28:06,7, GSM1: -> AT+CPMS="ME","ME","ME"
2016-10-10 18:28:06,7, GSM1: Command is sent, waiting for the answer
2016-10-10 18:28:06,7, GSM1: <- +CPMS: 0,30,0,30,0,30 OK
2016-10-10 18:28:06,7, GSM1: -> AT+CSQ
2016-10-10 18:28:06,7, GSM1: Command is sent, waiting for the answer
2016-10-10 18:28:07,7, GSM1: <- +CSQ: 99,99 OK
2016-10-10 18:28:07,6, GSM1: Signal Strength Indicator: not present of not measurable, Bit Error Rate: not known or not detectable
2016-10-10 18:28:07,6, GSM1: Checking if Modem is registered to the network
2016-10-10 18:28:07,7, GSM1: -> AT+CREG?
2016-10-10 18:28:07,7, GSM1: Command is sent, waiting for the answer
2016-10-10 18:28:07,7, GSM1: <- +CREG: 2,4 OK
2016-10-10 18:28:07,5, GSM1: MODEM IS NOT REGISTERED, WAITING 1 SEC. BEFORE RETRYING 1. TIME
2016-10-10 18:28:08,7, GSM1: -> AT+CSQ
2016-10-10 18:28:08,7, GSM1: Command is sent, waiting for the answer
2016-10-10 18:28:09,7, GSM1: <- +CSQ: 99,99 OK
2016-10-10 18:28:09,5, GSM1: Signal Strength Indicator: not present of not measurable, Bit Error Rate: not known or not detectable
2016-10-10 18:28:09,7, GSM1: -> AT+CREG?
2016-10-10 18:28:09,7, GSM1: Command is sent, waiting for the answer
2016-10-10 18:28:09,7, GSM1: <- +CREG: 2,4 OK
2016-10-10 18:28:09,5, GSM1: MODEM IS NOT REGISTERED, WAITING 1 SEC. BEFORE RETRYING 2. TIME
2016-10-10 18:28:10,7, GSM1: -> AT+CSQ

[ Select ]

[ Expand ]

My config:

#
# /etc/smsd.conf
#
# Description: Main configuration file for the smsd
#

devices = GSM1
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
incoming = /var/spool/sms/incoming
logfile = /var/log/smstools/smsd.log
infofile = /var/run/smstools/smsd.working
pidfile = /var/run/smstools/smsd.pid
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
stats = /var/log/smstools/smsd_stats
receive_before_send = no
loglevel = 7
autosplit = 3


[GSM1]
init = AT+CFUN=1
device = /dev/ttyACM0
incoming = no
keep_open = yes
cs_convert = yes
report = no
#report_device_details = yes
init2 = AT+CPMS="ME","ME","ME"

#rtscts = no
regular_run_interval = 60
regular_run_cmd = AT+CREG?;+CSQ;+COPS?
regular_run_statfile = /dev/shm/sms_stat
 

[ Select ]

[ Expand ]

'smsdconf' Syntax Highlight powered by GeSHi

fips

Top

#3 Fri Oct 14, 2016 08:17, 91 months ago.

Member

Registered:
Oct 2016

Posts: 4

Location: Austria

Topic owner

Thanks for your reply.

Issue was simple: Antenna was broken ;-)
Now it works like a charm.

[solved] Ericsson F3507G Modem is not registered