Operating system name and version: CentOS release 6.9
Version of smsd: Version 3.1.15
Smsd installed from: sources (http://smstools3.kekekasvi.com/index.php?p=packages)
Name and model of a modem / phone: VISIONTEK 81GC
Interface: serial

I have connected Visiontek 81GC device and configured smstools3-3.1.15.

After configuration, Ran this command:
# sendsms +919530187457 "HI"
--
Text: HI
To: +919530187457

But I am not receiving message.
Below is the smsd.conf file:

# cat /etc/smsd.conf


Below is the log file:

/var/log/smsd.log
2017-06-16 12:07:30,2, smsd: Smsd v3.1.15 started. 2017-06-16 12:07:30,2, smsd: Running as root:root. 2017-06-16 12:07:30,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.mF5SK5 /tmp/smsd_data.HLgnTQ 2017-06-16 12:07:30,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0) 2017-06-16 12:07:30,4, smsd: File mode creation mask: 022 (0644, rw-r--r--). 2017-06-16 12:07:30,5, smsd: Outgoing file checker has started. PID: 5153. 2017-06-16 12:07:30,7, smsd: All PID's: 5153,5155 2017-06-16 12:07:30,5, GSM1: Modem handler 0 has started. PID: 5155. 2017-06-16 12:07:30,5, GSM1: Using check_memory_method 1: CPMS is used. 2017-06-16 12:07:30,5, GSM1: Using read_timeout 60 seconds. 2017-06-16 12:07:30,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/send_uBi8jc 2017-06-16 12:07:30,6, GSM1: Sending SMS from to 919530187457 2017-06-16 12:07:30,6, GSM1: Checking if modem is ready 2017-06-16 12:07:30,7, GSM1: -> AT 2017-06-16 12:08:11,5, smsd: Moved file /var/spool/sms/outgoing/send_Euqo2Z to /var/spool/sms/checked 2017-06-16 12:08:11,7, GSM1: Command is sent, waiting for the answer 2017-06-16 12:08:31,5, smsd: Moved file /var/spool/sms/outgoing/send_76fGMH to /var/spool/sms/checked 2017-06-16 12:09:11,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 1. 2017-06-16 12:09:11,7, GSM1: <- 2017-06-16 12:09:11,7, GSM1: -> ^Z 2017-06-16 12:09:32,5, smsd: Moved file /var/spool/sms/outgoing/send_JzQqj6 to /var/spool/sms/checked 2017-06-16 12:09:32,7, GSM1: Command is sent, waiting for the answer 2017-06-16 12:09:32,5, smsd: Moved file /var/spool/sms/outgoing/send_Tb24Ho to /var/spool/sms/checked 2017-06-16 12:09:53,5, smsd: Moved file /var/spool/sms/outgoing/send_6jlmix to /var/spool/sms/checked 2017-06-16 12:09:53,5, smsd: Moved file /var/spool/sms/outgoing/send_KYfbw4 to /var/spool/sms/checked 2017-06-16 12:09:54,5, smsd: Moved file /var/spool/sms/outgoing/send_j4JxIa to /var/spool/sms/checked

Please help here.

Here is the dmesg output:

[root@nms_noc checked]# dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-696.el6.x86_64 (mockbuild@c1bm.rdu2.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-18) (GCC) ) #1 SMP Tue Mar 21 19:29:05 UTC 2017 Command line: ro root=UUID=6985b94c-136f-4a33-b3e8-ba4d897fa5a1 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000093000 (usable) BIOS-e820: 0000000000093000 - 0000000000094000 (reserved) BIOS-e820: 0000000000094000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 0000000062fe1000 (usable) BIOS-e820: 0000000062fe1000 - 000000006b5e1000 (reserved) BIOS-e820: 000000006b5e1000 - 000000006b5e2000 (usable) BIOS-e820: 000000006b5e2000 - 000000006b663000 (reserved) BIOS-e820: 000000006b663000 - 00000000784ff000 (usable) BIOS-e820: 00000000784ff000 - 00000000791ff000 (reserved) BIOS-e820: 00000000791ff000 - 000000007b5ff000 (ACPI NVS) BIOS-e820: 000000007b5ff000 - 000000007b7ff000 (ACPI data) BIOS-e820: 000000007b7ff000 - 000000007b800000 (usable) BIOS-e820: 0000000080000000 - 0000000090000000 (reserved) BIOS-e820: 0000000100000000 - 0000000480000000 (usable) EFI v2.40 by HP ACPI=0x7b7fe000 ACPI 2.0=0x7b7fe014 SMBIOS=0x788fb000 EFI: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000091000) (0MB) EFI: mem01: type=2, attr=0xf, range=[0x0000000000091000-0x0000000000093000) (0MB) EFI: mem02: type=0, attr=0xf, range=[0x0000000000093000-0x0000000000094000) (0MB) EFI: mem03: type=7, attr=0xf, range=[0x0000000000094000-0x00000000000a0000) (0MB) EFI: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x000000003ed00000) (1004MB) EFI: mem05: type=4, attr=0xf, range=[0x000000003ed00000-0x000000003ed80000) (0MB) EFI: mem06: type=7, attr=0xf, range=[0x000000003ed80000-0x0000000060570000) (535MB) EFI: mem07: type=2, attr=0xf, range=[0x0000000060570000-0x0000000062fe1000) (42MB) EFI: mem08: type=0, attr=0xf, range=[0x0000000062fe1000-0x000000006b5e1000) (134MB) EFI: mem09: type=4, attr=0xf, range=[0x000000006b5e1000-0x000000006b5e2000) (0MB) EFI: mem10: type=6, attr=0x800000000000000f, range=[0x000000006b5e2000-0x000000006b663000) (0MB) EFI: mem11: type=4, attr=0xf, range=[0x000000006b663000-0x000000006ecfb000) (54MB) EFI: mem12: type=3, attr=0xf, range=[0x000000006ecfb000-0x000000006ecfc000) (0MB) EFI: mem13: type=2, attr=0xf, range=[0x000000006ecfc000-0x000000006ecff000) (0MB) EFI: mem14: type=7, attr=0xf, range=[0x000000006ecff000-0x000000007063c000) (25MB) EFI: mem15: type=4, attr=0xf, range=[0x000000007063c000-0x0000000070641000) (0MB) EFI: mem16: type=7, attr=0xf, range=[0x0000000070641000-0x0000000070a2c000) (3MB) EFI: mem17: type=4, attr=0xf, range=[0x0000000070a2c000-0x0000000070f53000) (5MB) EFI: mem18: type=7, attr=0xf, range=[0x0000000070f53000-0x0000000070f56000) (0MB) EFI: mem19: type=4, attr=0xf, range=[0x0000000070f56000-0x0000000070f57000) (0MB) EFI: mem20: type=7, attr=0xf, range=[0x0000000070f57000-0x0000000070f58000) (0MB) EFI: mem21: type=4, attr=0xf, range=[0x0000000070f58000-0x0000000070f8e000) (0MB) EFI: mem22: type=7, attr=0xf, range=[0x0000000070f8e000-0x0000000070f8f000) (0MB) EFI: mem23: type=4, attr=0xf, range=[0x0000000070f8f000-0x0000000072ae6000) (27MB) EFI: mem24: type=7, attr=0xf, range=[0x0000000072ae6000-0x0000000072aea000) (0MB) EFI: mem25: type=4, attr=0xf, range=[0x0000000072aea000-0x0000000072aeb000) (0MB) EFI: mem26: type=7, attr=0xf, range=[0x0000000072aeb000-0x0000000072aed000) (0MB) EFI: mem27: type=4, attr=0xf, range=[0x0000000072aed000-0x0000000072aee000) (0MB) EFI: mem28: type=7, attr=0xf, range=[0x0000000072aee000-0x0000000072aef000) (0MB) EFI: mem29: type=4, attr=0xf, range=[0x0000000072aef000-0x0000000072af0000) (0MB) EFI: mem30: type=7, attr=0xf, range=[0x0000000072af0000-0x0000000072af2000) (0MB) EFI: mem31: type=4, attr=0xf, range=[0x0000000072af2000-0x0000000072af3000) (0MB) EFI: mem32: type=7, attr=0xf, range=[0x0000000072af3000-0x0000000072af5000) (0MB) EFI: mem33: type=4, attr=0xf, range=[0x0000000072af5000-0x0000000072de0000) (2MB) EFI: mem34: type=7, attr=0xf, range=[0x0000000072de0000-0x0000000072de4000) (0MB) EFI: mem35: type=4, attr=0xf, range=[0x0000000072de4000-0x0000000072e51000) (0MB) EFI: mem36: type=7, attr=0xf, range=[0x0000000072e51000-0x0000000072e55000) (0MB) EFI: mem37: type=4, attr=0xf, range=[0x0000000072e55000-0x0000000072e56000) (0MB) EFI: mem38: type=7, attr=0xf, range=[0x0000000072e56000-0x0000000072e58000) (0MB) EFI: mem39: type=4, attr=0xf, range=[0x0000000072e58000-0x0000000076cff000) (62MB) EFI: mem40: type=2, attr=0xf, range=[0x0000000076cff000-0x0000000076e52000) (1MB) EFI: mem41: type=7, attr=0xf, range=[0x0000000076e52000-0x0000000076e9e000) (0MB) EFI: mem42: type=2, attr=0xf, range=[0x0000000076e9e000-0x00000000770ff000) (2MB) EFI: mem43: type=7, attr=0xf, range=[0x00000000770ff000-0x00000000774be000) (3MB) EFI: mem44: type=1, attr=0xf, range=[0x00000000774be000-0x00000000774ff000) (0MB) EFI: mem45: type=7, attr=0xf, range=[0x00000000774ff000-0x00000000776c1000) (1MB) EFI: mem46: type=3, attr=0xf, range=[0x00000000776c1000-0x00000000784ff000) (14MB) EFI: mem47: type=6, attr=0x800000000000000f, range=[0x00000000784ff000-0x00000000788ff000) (4MB) EFI: mem48: type=5, attr=0x800000000000000f, range=[0x00000000788ff000-0x00000000790ff000) (8MB) EFI: mem49: type=0, attr=0xf, range=[0x00000000790ff000-0x00000000791ff000) (1MB) EFI: mem50: type=10, attr=0xf, range=[0x00000000791ff000-0x000000007b5ff000) (36MB) EFI: mem51: type=9, attr=0xf, range=[0x000000007b5ff000-0x000000007b7ff000) (2MB) EFI: mem52: type=4, attr=0xf, range=[0x000000007b7ff000-0x000000007b800000) (0MB) EFI: mem53: type=7, attr=0xf, range=[0x0000000100000000-0x0000000480000000) (14336MB) EFI: mem54: type=11, attr=0x8000000000000000, range=[0x0000000080000000-0x0000000090000000) (256MB) SMBIOS version 2.8 @ 0x788FB000 SMBIOS 2.8 present. DMI: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015 e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x480000 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0x7b800 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-000000007b800000 0000000000 - 0040000000 page 1G 0040000000 - 007b800000 page 2M kernel direct mapping tables up to 7b800000 @ 8000-a000 Use unified mapping for non-reserved e820 regions. init_memory_mapping: 0000000100000000-0000000480000000 0100000000 - 0480000000 page 1G kernel direct mapping tables up to 480000000 @ 9000-a000 RAMDISK: 60b51000 - 624ca343 ACPI: Deleted _OSI(Windows 2012) ACPI: Deleted _OSI(Windows 2013) ACPI: RSDP 000000007b7fe014 00024 (v02 HP ) ACPI: XSDT 000000007b7e8188 000F4 (v01 HP ProLiant 00000001 01000013) ACPI: FACP 000000007b7f5000 0010C (v05 HP ProLiant 00000001 HP 00000001) ACPI: DSDT 000000007b7e4000 02FC7 (v02 HP DSDT 00000002 HPAG 00020000) ACPI: FACS 000000007b5a9000 00040 ACPI: UEFI 000000007b5e1000 00042 (v01 HP ProLiant 00000002 01000013) ACPI: MCEJ 000000007b7fc000 00130 (v01 HP ProLiant 00000001 INTL 0100000D) ACPI: SSDT 000000007b7fb000 00064 (v02 HP SpsNvs 00000002 INTL 20130328) ACPI: HEST 000000007b7fa000 000A8 (v01 HP ProLiant 00000001 INTL 00000001) ACPI: BERT 000000007b7f9000 00030 (v01 HP ProLiant 00000001 INTL 00000001) ACPI: ERST 000000007b7f8000 00230 (v01 HP ProLiant 00000001 INTL 00000001) ACPI: EINJ 000000007b7f7000 00150 (v01 HP ProLiant 00000001 INTL 00000001) ACPI: BGRT 000000007b7f6000 00038 (v01 HP ProLiant 00000002 HP 01000013) ACPI: HPET 000000007b7f4000 00038 (v01 HP ProLiant 00000001 HP 00000001) ACPI: PMCT 000000007b7f3000 00064 (v01 HP ProLiant 00000001 HP 00000001) ACPI: WDDT 000000007b7f2000 00040 (v01 HP ProLiant 00000001 HP 00000001) ACPI: APIC 000000007b7f1000 00106 (v03 HP ProLiant 00000001 HP 00000001) ACPI: MCFG 000000007b7f0000 0003C (v01 HP ProLiant 00000001 HP 00000001) ACPI: SLIT 000000007b7ef000 0002D (v01 HP ProLiant 00000001 HP 00000001) ACPI: SRAT 000000007b7ee000 000E8 (v03 HP ProLiant 00000001 HP 00000001) ACPI: SPMI 000000007b7ed000 00041 (v05 HP ProLiant 00000001 HP 00000001) ACPI: RASF 000000007b7ec000 00030 (v01 HP ProLiant 00000001 HP 00000001) ACPI: SPCR 000000007b7eb000 00050 (v01 HP ProLiant 00000001 HP 00000001) ACPI: MSCT 000000007b7ea000 0004E (v01 HP ProLiant 00000001 HP 00000001) ACPI: BDAT 000000007b7e9000 00030 (v01 HP ProLiant 00000001 HP 00000001) ACPI: PCCT 000000007b7fd000 0006E (v01 HP ProLiant 00000001 HP 00000001) ACPI: DMAR 000000007b7e7000 00278 (v01 HP ProLiant 00000001 HP 00000001) ACPI: SSDT 000000007b7dd000 061D5 (v02 HP PCISSDT 00000002 HPAG 00020000) ACPI: SSDT 000000007b7dc000 001CB (v02 HP TIMESSDT 00000002 HPAG 00020000) ACPI: SSDT 000000007b7db000 002F2 (v01 HP pmab 00000001 INTL 20130328) ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 4 -> Node 0 SRAT: PXM 0 -> APIC 8 -> Node 0 SRAT: PXM 0 -> APIC 2 -> Node 0 SRAT: PXM 0 -> APIC 6 -> Node 0 SRAT: PXM 0 -> APIC 10 -> Node 0 SRAT: Node 0 PXM 0 0-480000000 NUMA: Using 63 for the hash shift. Bootmem setup node 0 0000000000000000-0000000480000000 NODE_DATA [0000000000009000 - 000000000003cfff] bootmap [0000000000100000 - 000000000018ffff] pages 90 (9 early reservations) ==> bootmem [0000000000 - 0480000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0002045964] TEXT DATA BSS ==> [0001000000 - 0002045964] #3 [0060b51000 - 00624ca343] RAMDISK ==> [0060b51000 - 00624ca343] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [00770fc000 - 00770fca50] EFI memmap ==> [00770fc000 - 00770fca50] #6 [0002046000 - 0002046a5d] BRK ==> [0002046000 - 0002046a5d] #7 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] #8 [0000001000 - 000000102d] ACPI SLIT ==> [0000001000 - 000000102d] Reserving 128MB of memory at 48MB for crashkernel (System RAM: 18432MB) [ffffea0000000000-ffffea000fbfffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00480000 Movable zone start PFN for each node early_node_map[7] active PFN ranges 0: 0x00000001 -> 0x00000093 0: 0x00000094 -> 0x000000a0 0: 0x00000100 -> 0x00062fe1 0: 0x0006b5e1 -> 0x0006b5e2 0: 0x0006b663 -> 0x000784ff 0: 0x0007b7ff -> 0x0007b800 0: 0x00100000 -> 0x00480000 On node 0 totalpages: 4128285 DMA zone: 56 pages used for memmap DMA zone: 101 pages reserved DMA zone: 3841 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 439991 pages, LIFO batch:31 Normal zone: 50176 pages used for memmap Normal zone: 3619840 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 Setting APIC routing to flat. ACPI: X2APIC (apic_id[0x00] uid[0x00] enabled) ACPI: X2APIC (apic_id[0x04] uid[0x04] enabled) ACPI: X2APIC (apic_id[0x08] uid[0x08] enabled) ACPI: X2APIC (apic_id[0x02] uid[0x02] enabled) ACPI: X2APIC (apic_id[0x06] uid[0x06] enabled) ACPI: X2APIC (apic_id[0x0a] uid[0x0a] enabled) ACPI: X2APIC_NMI (uid[0x00] high level lint[0x1]) ACPI: X2APIC_NMI (uid[0x02] high level lint[0x1]) ACPI: X2APIC_NMI (uid[0x04] high level lint[0x1]) ACPI: X2APIC_NMI (uid[0x06] high level lint[0x1]) ACPI: X2APIC_NMI (uid[0x08] high level lint[0x1]) ACPI: X2APIC_NMI (uid[0x0a] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 6 CPUs, 0 hotplug CPUs nr_irqs_gsi: 48 PM: Registered nosave memory: 0000000000093000 - 0000000000094000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 0000000062fe1000 - 000000006b5e1000 PM: Registered nosave memory: 000000006b5e2000 - 000000006b663000 PM: Registered nosave memory: 00000000784ff000 - 00000000791ff000 PM: Registered nosave memory: 00000000791ff000 - 000000007b5ff000 PM: Registered nosave memory: 000000007b5ff000 - 000000007b7ff000 PM: Registered nosave memory: 000000007b800000 - 0000000080000000 PM: Registered nosave memory: 0000000080000000 - 0000000090000000 PM: Registered nosave memory: 0000000090000000 - 0000000100000000 Allocating PCI resources starting at 90000000 (gap: 90000000:70000000) Booting paravirtualized kernel on bare hardware NR_CPUS:4096 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 PERCPU: Embedded 31 pages/cpu @ffff880028200000 s96600 r8192 d22184 u262144 pcpu-alloc: s96600 r8192 d22184 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 - - Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4063672 Policy zone: Normal Kernel command line: ro root=UUID=6985b94c-136f-4a33-b3e8-ba4d897fa5a1 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet PID hash table entries: 4096 (order: 3, 32768 bytes) x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping. Memory: 15870500k/18874368k available (5467k kernel code, 2361228k absent, 642640k reserved, 6954k data, 1316k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:864 Extended CMOS year: 2000 Console: colour dummy device 80x25 console [tty0] enabled allocated 67108864 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 1897.796 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3795.59 BogoMIPS (lpj=1897796) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 22 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21966 entries in 87 pages dmar: Host address width 46 dmar: DRHD base: 0x000000fbffc000 flags: 0x1 dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de dmar: RMRR base: 0x00000079171000 end: 0x00000079173fff dmar: RMRR base: 0x000000791eb000 end: 0x000000791eefff dmar: RMRR base: 0x000000791db000 end: 0x000000791eafff dmar: RMRR base: 0x000000635e1000 end: 0x000000675e0fff dmar: RMRR base: 0x000000675e1000 end: 0x0000006b5e0fff dmar: RMRR base: 0x000000791c8000 end: 0x000000791d8fff dmar: RMRR base: 0x000000791d9000 end: 0x000000791dafff dmar: ATSR flags: 0x0 IOAPIC id 8 under DRHD base 0xfbffc000 IOAPIC id 9 under DRHD base 0xfbffc000 HPET id 0 under DRHD base 0xfbffc000 Enabled IRQ remapping in x2apic mode Enabling x2apic Enabled x2apic APIC routing finalized to cluster x2apic. alloc irq_desc for 48 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz stepping 02 Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Broken BIOS detected, complain to your hardware vendor. [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330) Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 8 ... value mask: 0000ffffffffffff ... max period: 0000ffffffffffff ... fixed-purpose events: 3 ... event mask: 00000007000000ff NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 #2 #3 #4 #5 Ok. Brought up 6 CPUs Total of 6 processors activated (22773.55 BogoMIPS). sizeof(vma)=200 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2672 bytes devtmpfs: initialized PM: Registering ACPI NVS region at 791ff000 (37748736 bytes) regulator: core version 0.5 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255 PCI: MCFG area at 80000000 reserved in E820 PCI: Using MMCONFIG at 80000000 - 8fffffff PCI: Using configuration type 1 for base access PCI: HP ProLiant DL380 detected, enabling pci=bfsort. NMI watchdog enabled, takes one hw-pmu counter. PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: BIOS offers _GTS ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. HEST: Table parsing has been initialized. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) PCI host bridge to bus 0000:ff pci 0000:ff:1e.3: reg 10: [io 0x0010-0x001f] ACPI: PCI Interrupt Routing Table [\_SB_.UNC0._PRT] pci0000:ff: Requesting ACPI _OSC control (0x1d) Unable to assume _OSC PCIe control. Disabling ASPM ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000cbfff] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb] pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [io 0x1000-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x90000000-0xfbffbfff] pci_root PNP0A08:00: host bridge window [mem 0x38000000000-0x39fffffffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000cbfff] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff] pci_bus 0000:00: root bus resource [mem 0x38000000000-0x39fffffffff] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:01.1: PME# supported from D0 D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: PME# supported from D0 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:02.2: PME# supported from D0 D3hot D3cold pci 0000:00:02.2: PME# disabled pci 0000:00:02.3: PME# supported from D0 D3hot D3cold pci 0000:00:02.3: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.1: PME# supported from D0 D3hot D3cold pci 0000:00:03.1: PME# disabled pci 0000:00:03.2: PME# supported from D0 D3hot D3cold pci 0000:00:03.2: PME# disabled pci 0000:00:03.3: PME# supported from D0 D3hot D3cold pci 0000:00:03.3: PME# disabled pci 0000:00:04.0: reg 10: [mem 0x39ffff2c000-0x39ffff2ffff 64bit] pci 0000:00:04.1: reg 10: [mem 0x39ffff28000-0x39ffff2bfff 64bit] pci 0000:00:04.2: reg 10: [mem 0x39ffff24000-0x39ffff27fff 64bit] pci 0000:00:04.3: reg 10: [mem 0x39ffff20000-0x39ffff23fff 64bit] pci 0000:00:04.4: reg 10: [mem 0x39ffff1c000-0x39ffff1ffff 64bit] pci 0000:00:04.5: reg 10: [mem 0x39ffff18000-0x39ffff1bfff 64bit] pci 0000:00:04.6: reg 10: [mem 0x39ffff14000-0x39ffff17fff 64bit] pci 0000:00:04.7: reg 10: [mem 0x39ffff10000-0x39ffff13fff 64bit] pci 0000:00:05.4: reg 10: [mem 0x92f05000-0x92f05fff] pci 0000:00:11.4: reg 10: [io 0x40a0-0x40a7] pci 0000:00:11.4: reg 14: [io 0x40bc-0x40bf] pci 0000:00:11.4: reg 18: [io 0x4098-0x409f] pci 0000:00:11.4: reg 1c: [io 0x40b8-0x40bb] pci 0000:00:11.4: reg 20: [io 0x4040-0x405f] pci 0000:00:11.4: reg 24: [mem 0x92f04000-0x92f047ff] pci 0000:00:11.4: PME# supported from D3hot pci 0000:00:11.4: PME# disabled pci 0000:00:14.0: reg 10: [mem 0x39ffff00000-0x39ffff0ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold pci 0000:00:14.0: PME# disabled pci 0000:00:1a.0: reg 10: [mem 0x92f02000-0x92f023ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold pci 0000:00:1c.6: PME# disabled pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold pci 0000:00:1c.7: PME# disabled pci 0000:00:1d.0: reg 10: [mem 0x92f01000-0x92f013ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x4078-0x407f] pci 0000:00:1f.2: reg 14: [io 0x40ac-0x40af] pci 0000:00:1f.2: reg 18: [io 0x4070-0x4077] pci 0000:00:1f.2: reg 1c: [io 0x40a8-0x40ab] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f] pci 0000:00:1f.2: reg 24: [mem 0x92f00000-0x92f007ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0x39ffff31000-0x39ffff310ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f] pci 0000:03:00.0: reg 10: [mem 0x92d00000-0x92dfffff 64bit] pci 0000:03:00.0: reg 18: [mem 0x92e00000-0x92e003ff 64bit] pci 0000:03:00.0: reg 20: [io 0x3000-0x30ff] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] pci 0000:03:00.0: PME# supported from D0 D1 D3hot pci 0000:03:00.0: PME# disabled pci 0000:00:01.0: PCI bridge to [bus 03-03] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0x92d00000-0x92efffff] pci 0000:00:01.1: PCI bridge to [bus 0e-0e] pci 0000:05:00.0: reg 10: [io 0x2000-0x20ff] pci 0000:05:00.0: reg 14: [mem 0x92b00000-0x92b07fff pref] pci 0000:05:00.0: reg 18: [io 0x2100-0x2103] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x00007fff pref] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:00:02.0: PCI bridge to [bus 05-05] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] pci 0000:00:02.0: bridge window [mem 0x92b00000-0x92bfffff 64bit pref] pci 0000:00:02.1: PCI bridge to [bus 0f-0f] pci 0000:00:02.2: PCI bridge to [bus 04-04] pci 0000:00:02.3: PCI bridge to [bus 10-10] pci 0000:00:03.0: PCI bridge to [bus 08-08] pci 0000:00:03.1: PCI bridge to [bus 11-11] pci 0000:00:03.2: PCI bridge to [bus 0b-0b] pci 0000:00:03.3: PCI bridge to [bus 12-12] pci 0000:00:1c.0: PCI bridge to [bus 13-13] (subtractive decode) pci 0000:00:1c.0: bridge window [mem 0x000c4000-0x000cbfff] (subtractive decode) pci 0000:00:1c.0: bridge window [io 0x0000-0x03af] (subtractive decode) pci 0000:00:1c.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode) pci 0000:00:1c.0: bridge window [io 0x03b0-0x03bb] (subtractive decode) pci 0000:00:1c.0: bridge window [io 0x03c0-0x03df] (subtractive decode) pci 0000:00:1c.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1c.0: bridge window [io 0x1000-0xffff] (subtractive decode) pci 0000:00:1c.0: bridge window [mem 0x90000000-0xfbffbfff] (subtractive decode) pci 0000:00:1c.0: bridge window [mem 0x38000000000-0x39fffffffff] (subtractive decode) pci 0000:01:00.0: reg 10: [io 0x1200-0x12ff] pci 0000:01:00.0: reg 14: [mem 0x92a91000-0x92a911ff] pci 0000:01:00.0: reg 18: [io 0x1100-0x11ff] pci 0000:01:00.1: reg 10: [mem 0x91000000-0x91ffffff pref] pci 0000:01:00.1: reg 14: [mem 0x92a8c000-0x92a8ffff] pci 0000:01:00.1: reg 18: [mem 0x92000000-0x927fffff] pci 0000:01:00.2: reg 10: [io 0x1000-0x10ff] pci 0000:01:00.2: reg 14: [mem 0x92a90000-0x92a900ff] pci 0000:01:00.2: reg 18: [mem 0x92900000-0x929fffff] pci 0000:01:00.2: reg 1c: [mem 0x92a00000-0x92a7ffff] pci 0000:01:00.2: reg 20: [mem 0x92a80000-0x92a87fff] pci 0000:01:00.2: reg 24: [mem 0x92800000-0x928fffff] pci 0000:01:00.2: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold pci 0000:01:00.2: PME# disabled pci 0000:01:00.4: reg 20: [io 0x1300-0x131f] pci 0000:01:00.7: reg 10: [mem 0x92a88000-0x92a8bfff] pci 0000:00:1c.2: PCI bridge to [bus 01-01] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.2: bridge window [mem 0x90000000-0x92afffff] pci 0000:02:00.0: reg 10: [mem 0x92c90000-0x92c9ffff 64bit pref] pci 0000:02:00.0: reg 18: [mem 0x92ca0000-0x92caffff 64bit pref] pci 0000:02:00.0: reg 20: [mem 0x92cb0000-0x92cbffff 64bit pref] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0003ffff pref] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.1: reg 10: [mem 0x92c60000-0x92c6ffff 64bit pref] pci 0000:02:00.1: reg 18: [mem 0x92c70000-0x92c7ffff 64bit pref] pci 0000:02:00.1: reg 20: [mem 0x92c80000-0x92c8ffff 64bit pref] pci 0000:02:00.1: reg 30: [mem 0x00000000-0x0003ffff pref] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold pci 0000:02:00.1: PME# disabled pci 0000:02:00.2: reg 10: [mem 0x92c30000-0x92c3ffff 64bit pref] pci 0000:02:00.2: reg 18: [mem 0x92c40000-0x92c4ffff 64bit pref] pci 0000:02:00.2: reg 20: [mem 0x92c50000-0x92c5ffff 64bit pref] pci 0000:02:00.2: reg 30: [mem 0x00000000-0x0003ffff pref] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold pci 0000:02:00.2: PME# disabled pci 0000:02:00.3: reg 10: [mem 0x92c00000-0x92c0ffff 64bit pref] pci 0000:02:00.3: reg 18: [mem 0x92c10000-0x92c1ffff 64bit pref] pci 0000:02:00.3: reg 20: [mem 0x92c20000-0x92c2ffff 64bit pref] pci 0000:02:00.3: reg 30: [mem 0x00000000-0x0003ffff pref] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold pci 0000:02:00.3: PME# disabled pci 0000:00:1c.4: PCI bridge to [bus 02-02] pci 0000:00:1c.4: bridge window [mem 0x92c00000-0x92cfffff 64bit pref] pci 0000:00:1c.6: PCI bridge to [bus 14-14] pci 0000:00:1c.7: PCI bridge to [bus 15-15] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR07._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR09._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC control (0x15) granted ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.1 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes pci 0000:ff:1e.3: can't claim BAR 0 [io 0x0010-0x001f]: no compatible bridge window pci 0000:ff:1e.3: can't reserve [io 0x0010-0x001f] NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default alloc irq_desc for 49 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 alloc irq_desc for 50 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 alloc irq_desc for 51 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 alloc irq_desc for 52 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 alloc irq_desc for 53 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 HPET: 8 timers in total, 5 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 49, 50, 51, 52, 53, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter hpet: hpet2 irq 49 for MSI hpet: hpet3 irq 50 for MSI hpet: hpet4 irq 51 for MSI hpet: hpet5 irq 52 for MSI hpet: hpet6 irq 53 for MSI Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:02: [mem 0xfec00000-0xfecfffff] pnp 00:02: Plug and Play ACPI device, IDs PNP0003 (active) pnp 00:03: [io 0x0000-0x000f] pnp 00:03: [io 0x0081-0x0083] pnp 00:03: [io 0x0087] pnp 00:03: [io 0x0089-0x008b] pnp 00:03: [io 0x008f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [io 0x0070-0x0071] pnp 00:04: [io 0x0074-0x0077] pnp 00:04: [irq 8] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:05: [io 0x00f0] pnp 00:05: [irq 13] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:06: [io 0x0061] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:07: [mem 0xfed00000-0xfed003ff] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:08: [io 0x0500-0x053f] pnp 00:08: [io 0x0400-0x047f] pnp 00:08: [io 0x0092] pnp 00:08: [io 0x0010-0x001f] pnp 00:08: [io 0x0072-0x0073] pnp 00:08: [io 0x0080] pnp 00:08: [io 0x0084-0x0086] pnp 00:08: [io 0x0088] pnp 00:08: [io 0x008c-0x008e] pnp 00:08: [io 0x0090-0x009f] pnp 00:08: [io 0x0540-0x057f] pnp 00:08: [io 0x0600-0x061f] pnp 00:08: [io 0x0880-0x0883] pnp 00:08: [io 0x0800-0x081f] pnp 00:08: [mem 0xfed1c000-0xfed3ffff] pnp 00:08: [mem 0xfed45000-0xfed8bfff] pnp 00:08: [mem 0xff000000-0xffffffff] pnp 00:08: [mem 0xfee00000-0xfeefffff] pnp 00:08: [mem 0xfed12000-0xfed1200f] pnp 00:08: [mem 0xfed12010-0xfed1201f] pnp 00:08: [mem 0xfed1b000-0xfed1bfff] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x0ca2-0x0ca3] pnp 00:09: Plug and Play ACPI device, IDs IPI0001 (active) pnp 00:0a: [io 0x03f8-0x03ff] pnp 00:0a: [irq 4] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0b: [io 0x02f8-0x02ff] pnp 00:0b: [irq 3] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:08: [io 0x0500-0x053f] has been reserved system 00:08: [io 0x0400-0x047f] has been reserved system 00:08: [io 0x0540-0x057f] has been reserved system 00:08: [io 0x0600-0x061f] has been reserved system 00:08: [io 0x0880-0x0883] has been reserved system 00:08: [io 0x0800-0x081f] has been reserved system 00:08: [mem 0xfed1c000-0xfed3ffff] has been reserved system 00:08: [mem 0xfed45000-0xfed8bfff] has been reserved system 00:08: [mem 0xff000000-0xffffffff] has been reserved system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved system 00:08: [mem 0xfed12000-0xfed1200f] has been reserved system 00:08: [mem 0xfed12010-0xfed1201f] has been reserved system 00:08: [mem 0xfed1b000-0xfed1bfff] has been reserved pci 0000:ff:1e.3: BAR 0: can't assign io (size 0x10) pci 0000:ff:1e.3: BAR 0: trying firmware assignment [io size 0x0010] pci 0000:ff:1e.3: BAR 0: [io size 0x0010] conflicts with PCI Bus 0000:00 [io 0x0000-0x03af] pci 0000:00:01.0: BAR 15: assigned [mem 0x93000000-0x930fffff pref] pci 0000:00:02.0: BAR 14: assigned [mem 0x93100000-0x931fffff] pci 0000:00:1c.2: BAR 15: assigned [mem 0x93200000-0x932fffff pref] pci 0000:00:1c.4: BAR 14: assigned [mem 0x93300000-0x933fffff] pci 0000:03:00.0: BAR 6: assigned [mem 0x93000000-0x9307ffff pref] pci 0000:00:01.0: PCI bridge to [bus 03-03] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0x92d00000-0x92efffff] pci 0000:00:01.0: bridge window [mem 0x93000000-0x930fffff pref] pci 0000:00:01.1: PCI bridge to [bus 0e-0e] pci 0000:05:00.0: BAR 6: assigned [mem 0x92b08000-0x92b0ffff pref] pci 0000:00:02.0: PCI bridge to [bus 05-05] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] pci 0000:00:02.0: bridge window [mem 0x93100000-0x931fffff] pci 0000:00:02.0: bridge window [mem 0x92b00000-0x92bfffff 64bit pref] pci 0000:00:02.1: PCI bridge to [bus 0f-0f] pci 0000:00:02.2: PCI bridge to [bus 04-04] pci 0000:00:02.3: PCI bridge to [bus 10-10] pci 0000:00:03.0: PCI bridge to [bus 08-08] pci 0000:00:03.1: PCI bridge to [bus 11-11] pci 0000:00:03.2: PCI bridge to [bus 0b-0b] pci 0000:00:03.3: PCI bridge to [bus 12-12] pci 0000:00:1c.0: PCI bridge to [bus 13-13] pci 0000:01:00.2: BAR 6: assigned [mem 0x93200000-0x9320ffff pref] pci 0000:00:1c.2: PCI bridge to [bus 01-01] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.2: bridge window [mem 0x90000000-0x92afffff] pci 0000:00:1c.2: bridge window [mem 0x93200000-0x932fffff pref] pci 0000:02:00.0: BAR 6: assigned [mem 0x92cc0000-0x92cfffff pref] pci 0000:02:00.1: BAR 6: assigned [mem 0x93300000-0x9333ffff pref] pci 0000:02:00.2: BAR 6: assigned [mem 0x93340000-0x9337ffff pref] pci 0000:02:00.3: BAR 6: assigned [mem 0x93380000-0x933bffff pref] pci 0000:00:1c.4: PCI bridge to [bus 02-02] pci 0000:00:1c.4: bridge window [mem 0x93300000-0x933fffff] pci 0000:00:1c.4: bridge window [mem 0x92c00000-0x92cfffff 64bit pref] pci 0000:00:1c.6: PCI bridge to [bus 14-14] pci 0000:00:1c.7: PCI bridge to [bus 15-15] alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:01.1: PCI INT A -> GSI 26 (level, low) -> IRQ 26 pci 0000:00:01.1: setting latency timer to 64 alloc irq_desc for 32 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pci 0000:00:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:02.1: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:00:02.1: setting latency timer to 64 pci 0000:00:02.2: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:00:02.2: setting latency timer to 64 pci 0000:00:02.3: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:00:02.3: setting latency timer to 64 alloc irq_desc for 40 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pci 0000:00:03.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:03.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40 pci 0000:00:03.1: setting latency timer to 64 pci 0000:00:03.2: PCI INT A -> GSI 40 (level, low) -> IRQ 40 pci 0000:00:03.2: setting latency timer to 64 pci 0000:00:03.3: PCI INT A -> GSI 40 (level, low) -> IRQ 40 pci 0000:00:03.3: setting latency timer to 64 alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.6: setting latency timer to 64 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.7: setting latency timer to 64 pci_bus 0000:00: resource 4 [mem 0x000c4000-0x000cbfff] pci_bus 0000:00: resource 5 [io 0x0000-0x03af] pci_bus 0000:00: resource 6 [io 0x03e0-0x0cf7] pci_bus 0000:00: resource 7 [io 0x03b0-0x03bb] pci_bus 0000:00: resource 8 [io 0x03c0-0x03df] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 10 [io 0x1000-0xffff] pci_bus 0000:00: resource 11 [mem 0x90000000-0xfbffbfff] pci_bus 0000:00: resource 12 [mem 0x38000000000-0x39fffffffff] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] pci_bus 0000:03: resource 1 [mem 0x92d00000-0x92efffff] pci_bus 0000:03: resource 2 [mem 0x93000000-0x930fffff pref] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] pci_bus 0000:05: resource 1 [mem 0x93100000-0x931fffff] pci_bus 0000:05: resource 2 [mem 0x92b00000-0x92bfffff 64bit pref] pci_bus 0000:13: resource 4 [mem 0x000c4000-0x000cbfff] pci_bus 0000:13: resource 5 [io 0x0000-0x03af] pci_bus 0000:13: resource 6 [io 0x03e0-0x0cf7] pci_bus 0000:13: resource 7 [io 0x03b0-0x03bb] pci_bus 0000:13: resource 8 [io 0x03c0-0x03df] pci_bus 0000:13: resource 9 [mem 0x000a0000-0x000bffff] pci_bus 0000:13: resource 10 [io 0x1000-0xffff] pci_bus 0000:13: resource 11 [mem 0x90000000-0xfbffbfff] pci_bus 0000:13: resource 12 [mem 0x38000000000-0x39fffffffff] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] pci_bus 0000:01: resource 1 [mem 0x90000000-0x92afffff] pci_bus 0000:01: resource 2 [mem 0x93200000-0x932fffff pref] pci_bus 0000:02: resource 1 [mem 0x93300000-0x933fffff] pci_bus 0000:02: resource 2 [mem 0x92c00000-0x92cfffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:14.0: enabling device (0140 -> 0142) pci 0000:00:14.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:14.0: PCI INT D disabled pci 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1a.0: PCI INT C disabled pci 0000:00:1d.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1d.0: PCI INT C disabled pci 0000:01:00.1: Boot video device pci 0000:01:00.4: PCI INT B -> GSI 19 (level, low) -> IRQ 19 pci 0000:01:00.4: PCI INT B disabled Trying to unpack rootfs image as initramfs... Freeing initrd memory: 26084k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Intel CQM monitoring enabled sysfb: VRAM smaller than advertised sha256_ssse3: Using AVX optimized SHA-256 implementation futex hash table entries: 2048 (order: 5, 131072 bytes) audit: initializing netlink socket (disabled) type=2000 audit(1497592588.814:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 31384 SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 1A01485A64DD991D - User ID: CentOS (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 54 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:01.0: irq 54 for MSI/MSI-X pcieport 0000:00:01.1: setting latency timer to 64 alloc irq_desc for 55 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:01.1: irq 55 for MSI/MSI-X pcieport 0000:00:02.0: setting latency timer to 64 alloc irq_desc for 56 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:02.0: irq 56 for MSI/MSI-X pcieport 0000:00:02.1: setting latency timer to 64 alloc irq_desc for 57 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:02.1: irq 57 for MSI/MSI-X pcieport 0000:00:02.2: setting latency timer to 64 alloc irq_desc for 58 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:02.2: irq 58 for MSI/MSI-X pcieport 0000:00:02.3: setting latency timer to 64 alloc irq_desc for 59 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:02.3: irq 59 for MSI/MSI-X pcieport 0000:00:03.0: setting latency timer to 64 alloc irq_desc for 60 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:03.0: irq 60 for MSI/MSI-X pcieport 0000:00:03.1: setting latency timer to 64 alloc irq_desc for 61 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:03.1: irq 61 for MSI/MSI-X pcieport 0000:00:03.2: setting latency timer to 64 alloc irq_desc for 62 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:03.2: irq 62 for MSI/MSI-X pcieport 0000:00:03.3: setting latency timer to 64 alloc irq_desc for 63 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:03.3: irq 63 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 64 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:1c.2: irq 64 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 65 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X pcieport 0000:00:1c.6: setting latency timer to 64 alloc irq_desc for 66 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:1c.6: irq 66 for MSI/MSI-X pcieport 0000:00:1c.7: setting latency timer to 64 alloc irq_desc for 67 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 pcieport 0000:00:1c.7: irq 67 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 efifb: probing for efifb efifb: framebuffer at 0x91000000, mapped to 0xffffc90022680000, using 3072k, total 3072k efifb: mode is 1024x768x32, linelength=4096, pages=1 efifb: scrolling: redraw efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: EFI VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] ACPI: acpi_idle yielding to intel_idle [Firmware Bug]: No valid trip found ERST: Error Record Serialization Table (ERST) support is initialized. GHES: APEI firmware first mode is enabled by WHEA _OSC. Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serial 0000:05:00.0: enabling device (0140 -> 0143) serial 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 serial 0000:05:00.0: PCI INT A disabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input1 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 18, io mem 0x92f02000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-696.el6.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 18, io mem 0x92f01000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-696.el6.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:01:00.4: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:01:00.4: setting latency timer to 64 uhci_hcd 0000:01:00.4: UHCI Host Controller uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3 uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:00.4: irq 19, io base 0x00001300 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-696.el6.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:01:00.4 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. usb 1-1: new high speed USB device number 2 using ehci_hcd usb 1-1: New USB device found, idVendor=8087, idProduct=800a usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected Refined TSC clocksource calibration: 1897.801 MHz. Switching to clocksource tsc i8042.c: Can't read CTR while initializing i8042. i8042: probe of i8042 failed with error -5 mice: PS/2 mouse device common for all mice rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver GRE over IPv4 demultiplexor driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 rtc_cmos 00:04: setting system clock to 2017-06-16 05:56:30 UTC (1497592590) Initalizing network drop monitor service Freeing unused kernel memory: 1316k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 656k freed Freeing unused kernel memory: 1548k freed dracut: dracut-004-409.el6_8.2 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: rd_NO_LVM: removing LVM activation usb 2-1: new high speed USB device number 2 using ehci_hcd device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com udev: starting version 147 usb 2-1: New USB device found, idVendor=8087, idProduct=8002 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected ACPI: WMI: Mapper loaded dracut: Starting plymouth daemon dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation HP HPSA Driver (v 3.4.10-0-RH3) hpsa 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hpsa 0000:03:00.0: setting latency timer to 64 hpsa 0000:03:00.0: MSI-X capable controller alloc irq_desc for 68 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 hpsa 0000:03:00.0: irq 68 for MSI/MSI-X alloc irq_desc for 69 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 hpsa 0000:03:00.0: irq 69 for MSI/MSI-X alloc irq_desc for 70 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 hpsa 0000:03:00.0: irq 70 for MSI/MSI-X alloc irq_desc for 71 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 hpsa 0000:03:00.0: irq 71 for MSI/MSI-X alloc irq_desc for 72 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 hpsa 0000:03:00.0: irq 72 for MSI/MSI-X alloc irq_desc for 73 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 hpsa 0000:03:00.0: irq 73 for MSI/MSI-X hpsa 0000:03:00.0: Logical aborts not supported scsi0 : hpsa hpsa 0000:03:00.0: scsi 0:3:0:0: added RAID HP P440ar RAID-UNKNOWN SSDSmartPathCap- En- Exp=3 hpsa 0000:03:00.0: scsi 0:2:0:0: masked Direct-Access HP EG0300JEHLV RAID-UNKNOWN SSDSmartPathCap- En- Exp=0 hpsa 0000:03:00.0: scsi 0:2:1:0: masked Direct-Access HP EG0300JEHLV RAID-UNKNOWN SSDSmartPathCap- En- Exp=0 hpsa 0000:03:00.0: scsi 0:2:2:0: masked Direct-Access HP EG0300JEHLV RAID-UNKNOWN SSDSmartPathCap- En- Exp=0 hpsa 0000:03:00.0: scsi 0:0:0:0: added Direct-Access HP LOGICAL VOLUME RAID-5 SSDSmartPathCap- En- Exp=3 scsi 0:3:0:0: RAID HP P440ar 3.56 PQ: 0 ANSI: 5 scsi 0:0:0:0: Direct-Access HP LOGICAL VOLUME 3.56 PQ: 0 ANSI: 5 ahci 0000:00:11.4: version 3.0 ahci 0000:00:11.4: enabling device (0406 -> 0407) ahci 0000:00:11.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 alloc irq_desc for 74 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 ahci 0000:00:11.4: irq 74 for MSI/MSI-X ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl RAID mode ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst ahci 0000:00:11.4: setting latency timer to 64 scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci ata1: SATA max UDMA/133 abar m2048@0x92f04000 port 0x92f04100 irq 74 ata2: SATA max UDMA/133 abar m2048@0x92f04000 port 0x92f04180 irq 74 ata3: SATA max UDMA/133 abar m2048@0x92f04000 port 0x92f04200 irq 74 ata4: SATA max UDMA/133 abar m2048@0x92f04000 port 0x92f04280 irq 74 ahci 0000:00:1f.2: enabling device (0406 -> 0407) ahci 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 alloc irq_desc for 75 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 ahci 0000:00:1f.2: irq 75 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst ahci 0000:00:1f.2: setting latency timer to 64 scsi5 : ahci scsi6 : ahci scsi7 : ahci scsi8 : ahci scsi9 : ahci scsi10 : ahci ata5: SATA max UDMA/133 abar m2048@0x92f00000 port 0x92f00100 irq 75 ata6: SATA max UDMA/133 abar m2048@0x92f00000 port 0x92f00180 irq 75 ata7: SATA max UDMA/133 abar m2048@0x92f00000 port 0x92f00200 irq 75 ata8: SATA max UDMA/133 abar m2048@0x92f00000 port 0x92f00280 irq 75 ata9: SATA max UDMA/133 abar m2048@0x92f00000 port 0x92f00300 irq 75 ata10: SATA max UDMA/133 abar m2048@0x92f00000 port 0x92f00380 irq 75 ata2: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata7: SATA link down (SStatus 0 SControl 300) ata9: SATA link down (SStatus 0 SControl 300) ata10: SATA link down (SStatus 0 SControl 300) xhci_hcd 0000:00:14.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 xhci_hcd 0000:00:14.0: setting latency timer to 64 xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 xhci_hcd 0000:00:14.0: cache line size of 64 is not supported usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: xHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-696.el6.x86_64 xhci_hcd usb usb4: SerialNumber: 0000:00:14.0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 15 ports detected xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 5 usb usb5: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor usb usb5: New USB device found, idVendor=1d6b, idProduct=0003 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: xHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32-696.el6.x86_64 xhci_hcd usb usb5: SerialNumber: 0000:00:14.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 6 ports detected sd 0:0:0:0: [sda] 1171743324 512-byte logical blocks: (599 GB/558 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 73 00 00 08 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk usb 4-3: new high speed USB device number 2 using xhci_hcd usb 4-3: New USB device found, idVendor=0424, idProduct=2660 usb 4-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 4-3: configuration #1 chosen from 1 choice hub 4-3:1.0: USB hub found hub 4-3:1.0: 2 ports detected EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/sda4 usb 4-11: new low speed USB device number 3 using xhci_hcd SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks usb 4-11: New USB device found, idVendor=275d, idProduct=0ba6 usb 4-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 4-11: Product: USB OPTICAL MOUSE usb 4-11: configuration #1 chosen from 1 choice usb 4-11: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb4/4-11/4-11:1.0/input/input2 generic-usb 0003:275D:0BA6.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-11/input0 type=1404 audit(1497592592.615:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root usb 4-12: new low speed USB device number 4 using xhci_hcd usb 4-12: New USB device found, idVendor=1a2c, idProduct=2124 usb 4-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-12: Product: USB Keyboard usb 4-12: Manufacturer: SEM usb 4-12: configuration #1 chosen from 1 choice usb 4-12: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes usb 4-12: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb4/4-12/4-12:1.0/input/input3 generic-usb 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:14.0-12/input0 input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb4/4-12/4-12:1.1/input/input4 generic-usb 0003:1A2C:2124.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:14.0-12/input1 udev: starting version 147 dca service started, version 1.12.1 ioatdma: Intel(R) QuickData Technology Driver 4.00 alloc irq_desc for 31 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 ioatdma 0000:00:04.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 ioatdma 0000:00:04.0: setting latency timer to 64 alloc irq_desc for 76 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 ioatdma 0000:00:04.0: irq 76 for MSI/MSI-X alloc irq_desc for 39 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 ioatdma 0000:00:04.1: PCI INT B -> GSI 39 (level, low) -> IRQ 39 ioatdma 0000:00:04.1: setting latency timer to 64 alloc irq_desc for 77 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 ioatdma 0000:00:04.1: irq 77 for MSI/MSI-X ioatdma 0000:00:04.2: PCI INT C -> GSI 31 (level, low) -> IRQ 31 ioatdma 0000:00:04.2: setting latency timer to 64 alloc irq_desc for 78 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 ioatdma 0000:00:04.2: irq 78 for MSI/MSI-X ioatdma 0000:00:04.3: PCI INT D -> GSI 39 (level, low) -> IRQ 39 ioatdma 0000:00:04.3: setting latency timer to 64 alloc irq_desc for 79 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 ioatdma 0000:00:04.3: irq 79 for MSI/MSI-X ioatdma 0000:00:04.4: PCI INT A -> GSI 31 (level, low) -> IRQ 31 ioatdma 0000:00:04.4: setting latency timer to 64 alloc irq_desc for 80 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 ioatdma 0000:00:04.4: irq 80 for MSI/MSI-X ioatdma 0000:00:04.5: PCI INT B -> GSI 39 (level, low) -> IRQ 39 ioatdma 0000:00:04.5: setting latency timer to 64 alloc irq_desc for 81 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 ioatdma 0000:00:04.5: irq 81 for MSI/MSI-X ioatdma 0000:00:04.6: PCI INT C -> GSI 31 (level, low) -> IRQ 31 ioatdma 0000:00:04.6: setting latency timer to 64 alloc irq_desc for 82 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 ioatdma 0000:00:04.6: irq 82 for MSI/MSI-X ioatdma 0000:00:04.7: PCI INT D -> GSI 39 (level, low) -> IRQ 39 ioatdma 0000:00:04.7: setting latency timer to 64 alloc irq_desc for 83 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 ioatdma 0000:00:04.7: irq 83 for MSI/MSI-X hpwdt 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 hpwdt: New timer passed in is 30 seconds. hpwdt 0000:01:00.0: HPE Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 1/ON) , priority: LAST (default = 0/LAST). hpwdt 0000:01:00.0: HPE Watchdog Timer Driver: 1.4.0-rh, timer margin: 30 seconds (nowayout=0). hpilo 0000:01:00.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 hpilo 0000:01:00.2: setting latency timer to 64 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered tg3.c:v3.137 (May 11, 2014) tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:02:00.0: setting latency timer to 64 tg3 0000:02:00.0: eth0: Tigon3 [partno(N/A) rev 5719001] (PCI Express) MAC address 14:02:ec:06:2e:14 tg3 0000:02:00.0: eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] tg3 0000:02:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit] alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 tg3 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 tg3 0000:02:00.1: setting latency timer to 64 tg3 0000:02:00.1: eth1: Tigon3 [partno(N/A) rev 5719001] (PCI Express) MAC address 14:02:ec:06:2e:15 tg3 0000:02:00.1: eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) tg3 0000:02:00.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] tg3 0000:02:00.1: eth1: dma_rwctrl[00000001] dma_mask[64-bit] tg3 0000:02:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:02:00.2: setting latency timer to 64 tg3 0000:02:00.2: eth2: Tigon3 [partno(N/A) rev 5719001] (PCI Express) MAC address 14:02:ec:06:2e:16 tg3 0000:02:00.2: eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) tg3 0000:02:00.2: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] tg3 0000:02:00.2: eth2: dma_rwctrl[00000001] dma_mask[64-bit] tg3 0000:02:00.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 tg3 0000:02:00.3: setting latency timer to 64 tg3 0000:02:00.3: eth3: Tigon3 [partno(N/A) rev 5719001] (PCI Express) MAC address 14:02:ec:06:2e:17 tg3 0000:02:00.3: eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) tg3 0000:02:00.3: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] tg3 0000:02:00.3: eth3: dma_rwctrl[00000001] dma_mask[64-bit] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003) i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 i801_smbus 0000:00:1f.3: SMBus using polling scsi 0:3:0:0: Attached scsi generic sg0 type 12 sd 0:0:0:0: Attached scsi generic sg1 type 0 EDAC MC: Ver: 2.1.0 Mar 21 2017 EDAC sbridge: Seeking for: PCI ID 8086:2fa0 EDAC sbridge: Seeking for: PCI ID 8086:2fa0 EDAC sbridge: Seeking for: PCI ID 8086:2ffc EDAC sbridge: Seeking for: PCI ID 8086:2ffc EDAC sbridge: Seeking for: PCI ID 8086:2ffd EDAC sbridge: Seeking for: PCI ID 8086:2ffd EDAC sbridge: Seeking for: PCI ID 8086:2f60 EDAC sbridge: Seeking for: PCI ID 8086:2f60 EDAC sbridge: Seeking for: PCI ID 8086:2fa8 EDAC sbridge: Seeking for: PCI ID 8086:2fa8 EDAC sbridge: Seeking for: PCI ID 8086:2f71 EDAC sbridge: Seeking for: PCI ID 8086:2f71 EDAC sbridge: Seeking for: PCI ID 8086:2faa EDAC sbridge: Seeking for: PCI ID 8086:2faa EDAC sbridge: Seeking for: PCI ID 8086:2fab EDAC sbridge: Seeking for: PCI ID 8086:2fab EDAC sbridge: Seeking for: PCI ID 8086:2fac EDAC sbridge: Seeking for: PCI ID 8086:2fad EDAC sbridge: Seeking for: PCI ID 8086:2fbd EDAC sbridge: Seeking for: PCI ID 8086:2fbd EDAC sbridge: Seeking for: PCI ID 8086:2fbf EDAC sbridge: Seeking for: PCI ID 8086:2fbf EDAC sbridge: Seeking for: PCI ID 8086:2fb9 EDAC sbridge: Seeking for: PCI ID 8086:2

dmesg output continued:

EDAC sbridge: Seeking for: PCI ID 8086:2fbb EDAC sbridge: Seeking for: PCI ID 8086:2fbb EDAC sbridge: Seeking for: PCI ID 8086:2f68 EDAC sbridge: Seeking for: PCI ID 8086:2f68 EDAC sbridge: Seeking for: PCI ID 8086:2f79 EDAC sbridge: Seeking for: PCI ID 8086:2f79 EDAC sbridge: Seeking for: PCI ID 8086:2f6a EDAC sbridge: Seeking for: PCI ID 8086:2f6a EDAC sbridge: Seeking for: PCI ID 8086:2f6b EDAC sbridge: Seeking for: PCI ID 8086:2f6b EDAC sbridge: Seeking for: PCI ID 8086:2f6c EDAC sbridge: Seeking for: PCI ID 8086:2f6d EDAC MC0: Giving out device to 'sbridge_edac.c' 'Haswell Socket#0': DEV 0000:ff:12.0 EDAC sbridge: Ver: 1.1.1 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: probing via ACPI ipmi_si 00:09: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 ipmi_si: Adding ACPI-specified kcs state machine ipmi_si: probing via SMBIOS ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface ipmi_si: probing via SPMI ipmi_si: SPMI: io 0xca3 regsize 1 spacing 1 irq 0 ipmi_si: Adding SPMI-specified kcs state machine ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si 00:09: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13) ipmi_si 00:09: IPMI kcs interface initialized power_meter ACPI000D:00: Found ACPI power meter. iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11rh iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x35 platform microcode: firmware: requesting intel-ucode/06-3f-02 microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x35 platform microcode: firmware: requesting intel-ucode/06-3f-02 microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x35 platform microcode: firmware: requesting intel-ucode/06-3f-02 microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x35 platform microcode: firmware: requesting intel-ucode/06-3f-02 microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x35 platform microcode: firmware: requesting intel-ucode/06-3f-02 microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x35 platform microcode: firmware: requesting intel-ucode/06-3f-02 Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba microcode: CPU0 updated to revision 0x39, date = 2016-10-07 microcode: CPU1 updated to revision 0x39, date = 2016-10-07 microcode: CPU2 updated to revision 0x39, date = 2016-10-07 microcode: CPU3 updated to revision 0x39, date = 2016-10-07 microcode: CPU4 updated to revision 0x39, date = 2016-10-07 microcode: CPU5 updated to revision 0x39, date = 2016-10-07 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A Adding 32767996k swap on /dev/sda3. Priority:-1 extents:1 across:32767996k NET: Registered protocol family 10 lo: Disabled Privacy Extensions Bridge firewalling registered alloc irq_desc for 84 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 tg3 0000:02:00.0: irq 84 for MSI/MSI-X alloc irq_desc for 85 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 tg3 0000:02:00.0: irq 85 for MSI/MSI-X alloc irq_desc for 86 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 tg3 0000:02:00.0: irq 86 for MSI/MSI-X alloc irq_desc for 87 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 tg3 0000:02:00.0: irq 87 for MSI/MSI-X alloc irq_desc for 88 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 tg3 0000:02:00.0: irq 88 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready device eth0 entered promiscuous mode tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX tg3 0000:02:00.0: eth0: EEE is disabled ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready br0: port 1(eth0) entering forwarding state type=1305 audit(1497592602.061:3): audit_pid=2139 old=0 auid=4294967295 ses=4294967295 res=1 br0: no IPv6 routers present eth0: no IPv6 routers present pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1200 MHz, 1900 MHz br0: port 1(eth0) entering forwarding state device virbr0-nic entered promiscuous mode virbr0: starting userspace STP failed, starting kernel STP ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) Ebtables v2.0 registered ip6_tables: (C) 2000-2006 Netfilter Core Team lo: Disabled Privacy Extensions pci 0000:01:00.1: Invalid ROM contents usb 3-1: new full speed USB device number 2 using uhci_hcd usb 3-1: New USB device found, idVendor=03f0, idProduct=7029 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: Virtual Keyboard usb 3-1: Manufacturer: BMC usb 3-1: configuration #1 chosen from 1 choice input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.2/0000:01:00.4/usb3/3-1/3-1:1.0/input/input5 generic-usb 0003:03F0:7029.0004: input,hidraw3: USB HID v1.01 Keyboard [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input0 input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.2/0000:01:00.4/usb3/3-1/3-1:1.1/input/input6 generic-usb 0003:03F0:7029.0005: input,hidraw4: USB HID v1.01 Mouse [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input1 device vnet0 entered promiscuous mode br0: port 2(vnet0) entering forwarding state device vnet1 entered promiscuous mode br0: port 3(vnet1) entering forwarding state vnet0: no IPv6 routers present vnet1: no IPv6 routers present br0: port 2(vnet0) entering forwarding state br0: port 3(vnet1) entering forwarding state kvm: 3654: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd kvm: 3693: cpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd usb 3-1: USB disconnect, device number 2 [root@nms_noc checked]#

I think that you should check which RS-232 port you are using. The first physical port is /dev/ttyS0 and /dev/ttyS1 is the second port.

When a modem is connected to the wrong physical RS-232 port, selected port works like your log shows. If you are sure that the port is correct, please check the cable.