SMS Server Tools 3
This site is hosted by Kekekasvi.com
 Menu
Basic information:
Additional information:
Support:
Get SMS Server Tools 3:
Additional Options

 Sponsored links

 Search
Custom Search

 Visitor locations
 
 SMS Server Tools 3 Community
Welcome, Guest. Please login or register. Fri Mar 29, 2024 14:27
SMSTools3 Community » Help and support Bottom

[solved] Huawei E173s 3G broadband stick (modem on)

Login and Post Reply

Page:  1

Author Post
Member
Registered:
Jun 2017
Location: Arad, Romania
Hello,
I am trying to send sms using huawei 173s.

Config:

[USB0]
init = AT^CURC=0
report_device_details = yes
signal_quality_ber_ignore = yes
device = /dev/ttyUSB0
incoming = yes

Error Log:

2017-06-21 15:01:19,6, USB0: Checking if modem is ready
2017-06-21 15:01:19,7, USB0: -> AT
2017-06-21 15:01:19,7, USB0: Command is sent, waiting for the answer
2017-06-21 15:01:19,7, USB0: <- OK
2017-06-21 15:01:19,6, USB0: Pre-initializing modem
2017-06-21 15:01:19,7, USB0: -> ATE0+CMEE=1;+CREG=2
2017-06-21 15:01:19,7, USB0: Command is sent, waiting for the answer
2017-06-21 15:01:20,7, USB0: <- OK
2017-06-21 15:01:20,6, USB0: Initializing modem
2017-06-21 15:01:20,7, USB0: -> AT^CURC=0
2017-06-21 15:01:20,7, USB0: Command is sent, waiting for the answer
2017-06-21 15:01:20,7, USB0: <- OK
2017-06-21 15:01:20,7, USB0: -> AT+CSQ
2017-06-21 15:01:20,7, USB0: Command is sent, waiting for the answer
2017-06-21 15:01:21,7, USB0: <- +CSQ: 19,99 OK
2017-06-21 15:01:21,6, USB0: Signal Strength Indicator: (19,99) -75 dBm (Good)
2017-06-21 15:01:21,6, USB0: Checking if Modem is registered to the network
2017-06-21 15:01:21,7, USB0: -> AT+CREG?
2017-06-21 15:01:21,7, USB0: Command is sent, waiting for the answer
2017-06-21 15:01:21,7, USB0: <- +CREG: 2,1,"1BA0","43DC" OK
2017-06-21 15:01:21,6, USB0: Modem is registered to the network
2017-06-21 15:01:21,6, USB0: Selecting PDU mode
2017-06-21 15:01:21,7, USB0: -> AT+CMGF=0
2017-06-21 15:01:21,7, USB0: Command is sent, waiting for the answer
2017-06-21 15:01:22,7, USB0: <- OK
2017-06-21 15:01:22,7, USB0: -> AT+CMGS=35
2017-06-21 15:01:22,7, USB0: Command is sent, waiting for the answer
2017-06-21 15:01:22,7, USB0: <- >
2017-06-21 15:01:22,7, USB0: -> 0011000B910447450680F60000FF17C8329BFD6681E8E8F41C949E83E8E83268DE9EBB01
2017-06-21 15:01:22,7, USB0: Command is sent, waiting for the answer
2017-06-21 15:01:48,3, USB0: The modem answer was not OK: +CMS ERROR: 500 (Unknown error)
2017-06-21 15:01:48,5, USB0: Waiting 10 sec. before retrying

Operating system name and version: Linux worker001 4.9.28-v7+ #998 SMP Mon May 15 16:55:39 BST 2017 armv7l GNU/Linux, Raspbian, RPI 3
Version of smsd: Smsd v3.1.15
Smsd installed from: apt-get install
Name and model of a modem / phone: Huawei E173s 3G broadband stick
Interface: USB

Network: 3G UMTS 2100

Do you have any clue to make this work?
Thank You.

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
It is not clear what is causing this error.

You could try a different port, device = /dev/ttyUSB2. Assuming that it does not help, try to set the number of service center, smsc = number in international format. Assuming that the error still exists, test the SIM with your handset and test another SIM with your modem.

Member
Registered:
Jun 2017
Location: Arad, Romania
Topic owner
You where right. The sim is restricted to "data only", i am not able to send sms with this one.
Thank You.

Login and Post Reply

Page:  1

SMSTools3 Community » Help and support Top

 
Time in this board is UTC.  

Privacy Policy   SMS Server Tools 3 Copyright © Keijo Kasvi.