SMS Server Tools 3
This site is hosted by Kekekasvi.com
 Menu
Basic information:
Additional information:
Support:
Get SMS Server Tools 3:
Additional Options

 Sponsored links

 Search
Custom Search

 Visitor locations
 
 SMS Server Tools 3 Community
Welcome, Guest. Please login or register. Thu Mar 28, 2024 21:50
SMSTools3 Community » Help and support Bottom

modem with 16 sims

Login and Post Reply

Page:  1

Author Post
Member
Registered:
Jun 2017
Location: Arad, Romania
Do you have any experience with devices like this one?
https://www.aliexpress.com/item/16-PORT-GPRS-MODEM-professional-SEND-RECEIVE-SMS-MSM-Gateway-Mobile-Recharge/1721780447.html

Is able smstools to deal with this?

As i can see there is only one usb conector.
Smstools will see this as a single modem or as 16 because inside that is usb hub also?

Thank You.

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
If the device provides independent serial interface for each module, like /dev/ttyUSB0, /dev/ttyUSB1 and so on, it can be used with SMSTools3.

I do not know if there is a hub inside. You have to ask that from the seller.

See also this topic:
http://smstools3.kekekasvi.com/topic.php?post=5734#post5734

Member
Registered:
Jun 2017
Location: Arad, Romania
Topic owner
The seller is telling me that i will see 16 serial devices under linux/windows, so... i will order one piece and make some tests.

Keke, nice software.
Thank You.

Member
Registered:
Jun 2017
Location: Arad, Romania
Topic owner
Hello,

I got that device, and it works. The modems are seen like ACM devices. My config that worked:

[T0]
device = /dev/ttyACM0
incoming = yes
outgoing = yes
signal_quality_ber_ignore = yes
cs_convert = yes
check_memory_method = 5
status_signal_quality = no

Is not working without antena, and every modem has his own power switch.
Speed for one modem: 4-5 sec, theoretically volume 11000-12000/hour.
No test with 16 sims yet.

lsusb on Raspberry pi 3:
Bus 001 Device 005: ID 1058:10b8 Western Digital Technologies, Inc.
Bus 001 Device 024: ID 04e2:1414 Exar Corp.
Bus 001 Device 023: ID 04e2:1414 Exar Corp.
Bus 001 Device 022: ID 04e2:1414 Exar Corp.
Bus 001 Device 021: ID 04e2:1414 Exar Corp.
Bus 001 Device 020: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Some pictures here: http://drgsm.ro/img/


« Last edit by ploaie on Tue Jul 11, 2017 15:31, 81 months ago. »
Member
Registered:
Jul 2017
Location: Santiago, Chile
Hello,

I have a question, in de smsd.conf, which is the code, because I tried but only can send by 1 modem, I don't understand because not sent by multiple modems

my code:

# Global configuration
# Configuration smsd.conf
#
checkhandler = /usr/local/bin/load_balancing.sh
#
devices = GSM1,GSM2,GSM3
#
logfile = /var/log/smsd.log
#loglevel = 6
loglevel = 5
delaytime = 0
delaytime_mainprocess = 0
internal_combine = yes
receive_before_send = no
logtime_ms = 1
max_continuous_sending = 600
incoming_utf8 = yes
umask = 111
stats_interval = 0
#checkhandler = /usr/local/bin/load_balancing.sh
smart_logging = yes
#
trust_outgoing = yes
stats = /var/spool/sms/stats
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
#
autosplit = 3
#
#Timers for errors (specify how many seconds stop on error)
blocktime = 3
errorsleeptime = 3
#
[queues]
#ALL = /var/spool/sms/all
Q1 = /var/spool/sms/modem1
Q2 = /var/spool/sms/modem2
Q3 = /var/spool/sms/modem3
#Q4 = /var/spool/sms/modem4

And the conf for modem is the same.

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
Hello cgambi,

The load balancing script has a bug. The maximum value of counter is limited to 255 by oversight, and I think that in your system counters are much more than that.

Here is a fixed version of load_balancing.sh:
#!/bin/bash
# ---------------------------------------------------------------------------------------
# This example is for three modems, named GSM1, GSM2 and GSM3 using queues Q1, Q2 and Q3.
# In the global part of smsd.conf, enable message counters:
# stats = /var/spool/sms/stats
# Use zero value for interval if statistics files are not used:
# stats_interval = 0
#
# Enable checkhandler (this script):
# checkhandler = /usr/local/bin/load_balancing.sh
#
# Define queues:
# [queues]
# Q1 = /var/spool/sms/Q1
# Q2 = /var/spool/sms/Q2
# Q3 = /var/spool/sms/Q3
#
# With smsd >= 3.1.7 providers are not needed to define,
# with previous versions define the following:
# [providers]
# Q1 = 0,1,2,3,4,5,6,7,8,9,s
# Q2 = 0,1,2,3,4,5,6,7,8,9,s
# Q3 = 0,1,2,3,4,5,6,7,8,9,s
#
# Add queue definition for each modem:
# [GSM1]
# queues = Q1
# etc...
# ---------------------------------------------------------------------------------------

# Settings for this script:
STATSDIR=/var/spool/sms/stats
MODEMS=( GSM1 GSM2 GSM3 )
QUEUES=( Q1 Q2 Q3 )

# ---------------------------------------------------------------------------------------

NUMBER_OF_MODEMS=${#MODEMS[@]}
NUMBER_OF_QUEUES=${#QUEUES[@]}
if [ $NUMBER_OF_MODEMS -ne $NUMBER_OF_QUEUES ]; then
  echo "ERROR: Number of queues does not match number of modems."
  exit 1 # Message is rejected.
fi

read_counter()
{
  local RESULT=0
  local FILE=$STATSDIR/$1.counter
  local COUNTER=0

  if [[ -e $FILE ]]
  then
    COUNTER=`formail -zx $1: < $FILE`
    if [ "$COUNTER" != "" ]; then
      RESULT=$COUNTER
    fi
  fi

  # Fix 23.7.2017: Use echo output, return value is limited to 255:
  #return $RESULT
  echo $RESULT
}

# If there is Queue (or Provider) defined, load balancing is ignored:
QUEUE=`formail -zx Queue: < $1`
if [ -z "$QUEUE" ]; then
  QUEUE=`formail -zx Provider: < $1`
  if [ -z "$QUEUE" ]; then

    # Read current counters:
    for ((i = 0; i < $NUMBER_OF_MODEMS; i++)); do
      # Fix 23.7.2017: Get echo output:
      #read_counter ${MODEMS[${i}]}
      #eval COUNTER_${MODEMS[${i}]}=$?
      tmp=$(read_counter ${MODEMS[${i}]})
      eval COUNTER_${MODEMS[${i}]}=$tmp
    done

    QUEUE=${QUEUES[0]}
    tmp=COUNTER_${MODEMS[0]}
    COUNTER=${!tmp}
    for ((i = 1; i < $NUMBER_OF_MODEMS; i++)); do
      tmp=COUNTER_${MODEMS[${i}]}
      tmp=${!tmp}
      if [ $tmp -lt $COUNTER ]; then
        QUEUE=${QUEUES[${i}]}
        tmp=COUNTER_${MODEMS[${i}]}
        COUNTER=${!tmp}
      fi
    done

    TMPFILE=`mktemp /tmp/smsd_XXXXXX`
    cp $1 $TMPFILE
    formail -f -I "Queue: $QUEUE" < $TMPFILE > $1
    unlink $TMPFILE
  fi
fi
exit 0
 
 
'bash' Syntax Highlight powered by GeSHi


Member
Registered:
Jul 2017
Location: Santiago, Chile
Hello Keke
i made the changes, and i'm still sending by 1 modem. (the first one in the queue).

here is my config file GSM 1, 2, 3:

[GSM1]
queues = ALL,GSM1
device = /dev/gsmmodem
ignore_unexpected_input = yes
detect_unexpected_input = no
report = no
sending_disabled = no
memory_start = 0
send_delay = 0
check_network = 0
voicecall_hangup_ath = yes
hangup_incoming_call = yes
voicecall_ignore_modem_response = yes
regular_run_interval = 60
regular_run_cmd = AT+CSQ
regular_run_logfile = /var/log/smsd_run_GSM1.log
regular_run_loglevel = 7
init2 = at+cmms=2
pin = ignore
status_signal_quality = no
outgoing = yes
pre_init = no
incoming = yes
mode = new
keep_open = yes
keep_messages = no
baudrate = 115200
rtscts = yes
cs_convert = yes
decode_unicode_text = yes
internal_combine = yes
check_memory_method = 2

here is my config file general:

devices = GSM1,GSM2,GSM3
#
logfile = /var/log/smsd.log
#loglevel = 6
loglevel = 5
delaytime = 0
delaytime_mainprocess = 0
internal_combine = yes
receive_before_send = no
logtime_ms = 1
max_continuous_sending = 600
incoming_utf8 = yes
umask = 111
stats_interval = 0
checkhandler = /usr/local/bin/load_balancing.sh
smart_logging = yes
#
trust_outgoing = yes
stats = /var/spool/sms/stats
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
#
autosplit = 3
#
#Timers for errors (specify how many seconds stop on error)
blocktime = 3
errorsleeptime = 3
#
#[default]
#queues = ALL,GSM1,GSM2,GSM3
#
[queues]
ALL = /var/spool/sms/all
GSM1 = /var/spool/sms/modem1
GSM2 = /var/spool/sms/modem2
GSM3 = /var/spool/sms/modem3

Pleas help

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
Check the sent message file in /var/spool/sms/sent directory. Has it a Queue: header?

Is a command formail installed in your system? If it's not, it's usually available in procmail package and this command is required by the script.

Member
Registered:
Jul 2017
Location: Santiago, Chile
thx for the answer.

I already have the formail command, so that can't be the problem.

but, the sent message file doesnt have any queue header. how do i put that header?

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
The checkhandler should put the Queue header into the file.

Try the following:

- stop the smsd if it's running

- create an outgoing file as usual, without Queue or Provider headers, with a name test1

- run the checkhandler manually: /usr/local/bin/load_balancing.sh /var/spool/sms/outgoing/test1

What happens? Is there any errors seen?

Also cat /var/spool/sms/stats/*.counter and show the results.

Member
Registered:
Jul 2017
Location: Santiago, Chile
i ran the checkhandler with a test file as you said, and nothing happened, no error.

pi@raspberrypi:/var/spool/sms/outgoing $ ls
test1
pi@raspberrypi:/var/spool/sms/outgoing $ /usr/local/bin/load_balancing.sh /var/spool/sms/outgoing/test1
pi@raspberrypi:/usr/local/bin $ cat /var/spool/sms/stats/*.counter
GSM1: 1478
GSM2: 0
GSM3: 0

i still have the test file in the outgoing folder
this is my test file:

To: 5699791XXXX

Hello, this is the sms.


after run the command, the file now is:

To: 5699791XXXX
Queue: Q2

Hello, this is the sms.


EDIT:

in the log file smsd i have this error:

2017-07-24 12:44:25.954,5, smsd: Wrong provider queue Q2 in file /var/spool/sms/outgoing/test1


« Last edit by cgambi on Mon Jul 24, 2017 16:46, 81 months ago. »
Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
Settings in the config file must be equal with settings in the load balancing script. You originally had queues Q1 and so on, but now you are using GSM1 and so on, which is not correct. Either change the smsd.conf, or change the script:



Member
Registered:
Jul 2017
Location: Santiago, Chile
i checked the names and its ok now. i set the queues as Q1 - Q3 and actually, if i create now a test1 file with the queue header, it work, and the sms its sended by the specific modem.

when i send a sms by the playsms api its seems like the messages are not getting the header.
what could be wrong?

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
Load balancing is ignored if there is Queue or Provider header in the file. When testing, you should not create Queue header by yourself.

Please check which headers are created by the playsms, as it may override the load balancing.

Member
Registered:
Jul 2017
Location: Santiago, Chile
ok, i checked the file, and when i created with no headers and then run /usr/local/bin/load_balancing.sh /v
ar/spool/sms/outgoing/test1 the file now has a queue header when open it again.

the test file only have:

To: 569XXXXXXXX

hi i'm a sms


and after run the command now i have

To: 569XXXXXXXX
Queue: Q2

hi i'm a sms

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
Did you check if playsms is creating Queue or Provider header? I do not have playsms installed, so I cannot check what kind of configuration it has. You could stop the smsd and create a new message with playsms. Then you could check what kind of file was created to the outgoing directory. If there is Queue (or Provider) set, it must be disabled in the playsms side. How to do that, I do not know.

Member
Registered:
Jul 2017
Location: Santiago, Chile
We're making a load balancer in our custom platform. so we're fine with that.
But, there are some troubles with 2 things:

1. i couldn't send more than 6.x (Average) sms per minute. is this the maximum send rate? or should be faster? is there a way to optimize this?

2. I can read in the log file that the sms are sended, but how can i know they delivery status? and if someone reply the sms, where can i read the incoming sms?

we've tested replying some sms, but nothing happens. even in the log, there's no clue about sms received


This is my Code:


some log to send:


thanks for the help!
regards

Login and Post Reply

Page:  1

SMSTools3 Community » Help and support Top

 
Time in this board is UTC.  

Privacy Policy   SMS Server Tools 3 Copyright © Keijo Kasvi.