Member
Registered: Mar 2018
Location: negombo., Sri Lanka
|
At the moment same isue happening here. But i only use 3 recipients on Nagios. But as i monitored the sms are seding maximum of 5 minutes delay. after the below log.
2018-03-21 12:12:09,3, GSM1: write_to_modem: error 5: Input/output error 2018-03-21 12:12:19,7, GSM1: -> 2018-03-21 12:12:19,3, GSM1: write_to_modem: error 5: Input/output error 2018-03-21 12:12:29,7, GSM1: -> AT 2018-03-21 12:12:29,3, GSM1: write_to_modem: error 5: Input/output error 2018-03-21 12:12:39,7, GSM1: -> 2018-03-21 12:12:39,3, GSM1: write_to_modem: error 5: Input/output error 2018-03-21 12:12:49,7, GSM1: -> AT 2018-03-21 12:12:49,3, GSM1: write_to_modem: error 5: Input/output error 2018-03-21 12:13:00,7, GSM1: -> 2018-03-21 12:13:00,3, GSM1: write_to_modem: error 5: Input/output error 2018-03-21 12:13:10,7, GSM1: -> AT 2018-03-21 12:13:10,3, GSM1: write_to_modem: error 5: Input/output error 2018-03-21 12:13:20,7, GSM1: -> 2018-03-21 12:13:20,3, GSM1: write_to_modem: error 5: Input/output error 2018-03-21 12:13:30,7, GSM1: -> AT 2018-03-21 12:13:30,3, GSM1: write_to_modem: error 5: Input/output error 2018-03-21 12:13:40,7, GSM1: -> 2018-03-21 12:13:40,3, GSM1: write_to_modem: error 5: Input/output error 2018-03-21 12:13:52,7, GSM1: -> AT 2018-03-21 12:13:52,7, GSM1: Command is sent, waiting for the answer 2018-03-21 12:13:52,7, GSM1: <- AT OK 2018-03-21 12:13:52,6, GSM1: Pre-initializing modem 2018-03-21 12:13:52,7, GSM1: -> ATE0+CMEE=1;+CREG=2 2018-03-21 12:13:52,7, GSM1: Command is sent, waiting for the answer 2018-03-21 12:13:52,7, GSM1: <- ATE0+CMEE=1;+CREG=2 OK 2018-03-21 12:13:53,7, GSM1: -> AT+CSQ 2018-03-21 12:13:53,7, GSM1: Command is sent, waiting for the answer 2018-03-21 12:13:53,7, GSM1: <- +CSQ: 21,99 OK 2018-03-21 12:13:53,6, GSM1: Signal Strength Indicator: (21,99) -71 dBm (Excellent), Bit Error Rate: not known or not detectable 2018-03-21 12:13:53,6, GSM1: Selecting PDU mode 2018-03-21 12:13:53,7, GSM1: -> AT+CMGF=0 2018-03-21 12:13:53,7, GSM1: Command is sent, waiting for the answer 2018-03-21 12:13:53,7, GSM1: <- OK 2018-03-21 12:13:54,7, GSM1: -> AT+CMGS=18 2018-03-21 12:13:54,7, GSM1: Command is sent, waiting for the answer 2018-03-21 12:13:54,7, GSM1: <- > 2018-03-21 12:13:54,7, GSM1: -> 0011000A9170767404440000FF05E8309BFD06 2018-03-21 12:13:54,7, GSM1: Command is sent, waiting for the answer 2018-03-21 12:13:57,7, GSM1: <- +CMGS: 56 OK 2018-03-21 12:13:57,5, GSM1: SMS sent, Message_id: 56, To: private, sending time 461 sec. Retries: 2. 2018-03-21 12:13:57,6, GSM1: Deleted file /var/spool/sms/checked/send_DOtdiw 2018-03-21 12:13:57,7, GSM1: Max continuous sending time reached, will do other tasks and then continue. 2018-03-21 12:13:57,6, GSM1: Sent 1 messages in 461 sec. Average time for one message: 461.0 sec.
do you facing the same issue on the log report?
|