SMSTools3 Help and support

#1 Tue Feb 02, 2016 11:53, 100 months ago.

Member

Registered:
Feb 2016

Location: Prague, Czech Republic

Operating system name and version: Debian 3.2.73-2+deb7u2
Version of smsd: 3.1.14
Smsd installed from: package repository
Name and model of a modem: Cinterion BGS2 Terminal RS232 / GM-BGS2T-232 / Gemalto M2M (L30960-N2700-A100)
Interface: serial

Hi, i have problem setting up modem mentioned above, could you please help?

My setup:

[GSM2]
device = /dev/ttyS1
rtscts = yes
mode = new
pin = 1234
queues = Q2
incoming = yes
baudrate = 115200
needs_wakeup_at = yes
 

[ Select ]

'smsdconf' Syntax Highlight powered by GeSHi

Log:

2016-02-02 12:40:42,5, GSM2: Modem handler 1 has started. PID: 3848.
2016-02-02 12:40:42,5, GSM2: Using check_memory_method 1: CPMS is used.
2016-02-02 12:40:42,6, GSM2: I have to send 1 short message for /var/spool/sms/Q2/tmp.z2Tq8yLj9F
2016-02-02 12:40:42,6, GSM2: Sending SMS from  to DELETED_NUMBER
2016-02-02 12:40:42,6, GSM2: Checking if modem is ready
2016-02-02 12:40:42,7, GSM2: -> AT
2016-02-02 12:40:42,7, GSM2: Command is sent
2016-02-02 12:40:43,7, GSM2: -> AT
2016-02-02 12:45:43,7, GSM2: Command is sent, waiting for the answer
2016-02-02 12:45:48,7, GSM2: put_command expected (OK)|(ERROR), timeout occurred. 1.
2016-02-02 12:45:48,7, GSM2: <-
2016-02-02 12:45:48,7, GSM2: -> ▒
2016-02-02 12:47:51,5, GSM2: Modem handler 1 has started. PID: 3991.
2016-02-02 12:47:51,5, GSM2: Using check_memory_method 1: CPMS is used.
2016-02-02 12:47:51,6, GSM2: I have to send 1 short message for /var/spool/sms/Q2/tmp.z2Tq8yLj9F
2016-02-02 12:47:51,6, GSM2: Sending SMS from  to DELETED_NUMBER
2016-02-02 12:47:51,6, GSM2: Checking if modem is ready
2016-02-02 12:47:51,7, GSM2: -> AT
2016-02-02 12:47:53,7, GSM2: Command is sent
2016-02-02 12:47:53,7, GSM2: -> AT
2016-02-02 12:48:44,7, GSM2: Command is sent, waiting for the answer
2016-02-02 12:48:49,7, GSM2: put_command expected (OK)|(ERROR), timeout occurred. 2.
2016-02-02 12:48:49,7, GSM2: <-
2016-02-02 12:48:49,7, GSM2: -> AT

[ Select ]

[ Expand ]

I've tried almost everything, but without success... It just hangs on timeout occured a never sends the message - it locks it, and when I try turn off the daemon, it's moved to failed directory.

Thanks for any advice,
Pavel

KrytakLisak

Top

#3 Mon May 28, 2018 14:12, 71 months ago.

Member

Registered:
May 2018

Posts: 1

Location: Czech Republic

Could you please specify the HW problem? Even after these years

Thank you

Cinterion BGS2 - put_command expected (OK) | (ERROR), timeout occured.