Operating system name and version: Windows 10 v1803
Version of smsd: 3.1.21
Smsd installed from: Cygwin
Name and model of a modem / phone: WAVECOM Q2403A
Interface: Serial COM18 USB / ttyS17

Hi! I have the same set up in my linux and it works fine, but I can't make it work on windows 10

I'm stuck at checking if modem is ready, and it gives no response.

Config
# Example smsd.conf. Read the manual for a description devices=sim1 incoming = /var/spool/sms/incoming outgoing = /var/spool/sms/outgoing checked = /var/spool/sms/checked failed = /var/spool/sms/failed sent = /var/spool/sms/sent os_cygwin = yes logfile = /var/log/smsd.log loglevel = 7 errorsleeptime=1 max_continuous_sending = 150000 blockafter = 1 logtime_ms=yes trust_outgoing =yes receive_before_send = no ################################### [sim1] init = AT+CNMI=2,0,0,2,1 pre_init=0 pin=ignore status_signal_quality=no outgoing=yes detect_unexpected_input=no trust_spool=no check_memory_method=41 communication_delay=300 cs_convert=yes detect_message_routing = no rtscts = no device = /dev/ttyS17 incoming = 0 report_device_details = no check_network = 0 signal_quality_ber_ignore = yes baudrate=9600 sending_disabled = no read_timeout = 5 init2 = AT+CSQ

and heres my log

2019-04-26 15:44:45.443,2, smsd: Smsd v3.1.21 started. 2019-04-26 15:44:45.444,2, smsd: Running as Roi:None (197609:197121). 2019-04-26 15:44:45.459,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.u0UHrW /tmp/smsd_data.RlJ1Fv 2019-04-26 15:44:45.561,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0) 2019-04-26 15:44:45.563,4, smsd: File mode creation mask: 022 (0644, rw-r--r--). 2019-04-26 15:44:45.563,6, smsd: Using logtime format "%Y-%m-%d %H:%M:%S.timems". It produces "2019-04-26 15:44:45.563". 2019-04-26 15:44:45.563,2, smsd: Running in terminal mode. 2019-04-26 15:44:45.595,5, smsd: Outgoing file checker has started. PID: 486. 2019-04-26 15:44:45.595,7, smsd: All PID's: 486,489 2019-04-26 15:44:45.595,5, sim1: Modem handler 0 has started. PID: 489. Will only send messages. 2019-04-26 15:44:45.595,5, sim1: Using communication_delay between new commands 300 milliseconds. 2019-04-26 15:44:45.599,6, sim1: Checking if modem is ready 2019-04-26 15:44:45.599,7, sim1: -> AT 2019-04-26 15:44:45.599,7, sim1: Command is sent, waiting for the answer. (5) 2019-04-26 15:44:50.089,7, sim1: No answer, put_command expected (OK)|(ERROR)|(0)|(4), timeout occurred. 1. 2019-04-26 15:44:50.089,7, sim1: <- 2019-04-26 15:44:50.401,7, sim1: ->  2019-04-26 15:44:50.401,7, sim1: Command is sent, waiting for the answer. (5) 2019-04-26 15:44:55.183,7, sim1: No answer, put_command expected (OK)|(ERROR)|(0)|(4), timeout occurred. 2. 2019-04-26 15:44:55.183,7, sim1: <- 2019-04-26 15:44:55.495,7, sim1: -> AT 2019-04-26 15:44:55.495,7, sim1: Command is sent, waiting for the answer. (5) 2019-04-26 15:45:00.249,7, sim1: No answer, put_command expected (OK)|(ERROR)|(0)|(4), timeout occurred. 3. 2019-04-26 15:45:00.249,7, sim1: <- 2019-04-26 15:45:00.561,7, sim1: ->  2019-04-26 15:45:00.561,7, sim1: Command is sent, waiting for the answer. (5) 2019-04-26 15:45:05.067,7, sim1: No answer, put_command expected (OK)|(ERROR)|(0)|(4), timeout occurred. 4. 2019-04-26 15:45:05.067,7, sim1: <- 2019-04-26 15:45:05.370,7, sim1: -> AT 2019-04-26 15:45:05.370,7, sim1: Command is sent, waiting for the answer. (5) 2019-04-26 15:45:10.204,7, sim1: No answer, put_command expected (OK)|(ERROR)|(0)|(4), timeout occurred. 5.

I even followed this guide http://smstools3.kekekasvi.com/topic.php?post=2773#post2773
still not working, what am I missing?