Operating system name and version: Ubuntu 10.04.4 LTS
Version of smsd: Smsd v3.1.15
Smsd installed from: sources
Name and model of a modem / phone: MultiTech MultiModem® rCell MTCBA-X-EN2
Interface: LAN (TCP)

Hello,

I am new here and got a question / error with our SMS Gateway.
Since I had updated our MultiModem yesterday from firmware version 2.5 to 2.7.18 I get a strange error in the smsd.log.
I did the firmware upgrade because there were some other issues before.
Now i'm not sure, if it's an error from our Modem or if it's just a simple configuration issue.

The smsd.log:
2013-10-01 11:00:01,2, smsd: Smsd mainprocess is awaiting the termination of all modem handlers. PID: 21453. 2013-10-01 11:00:01,2, sms-gateway: Modem handler 0 terminated. PID: 21455, was started 13-10-01 10:30:02. 2013-10-01 11:00:01,2, smsd: Smsd mainprocess terminated. PID 21453, was started 13-10-01 10:30:02. 2013-10-01 11:00:02,2, smsd: Smsd v3.1.15 started. 2013-10-01 11:00:02,2, smsd: Running as root:root. 2013-10-01 11:00:02,4, smsd: File mode creation mask: 022 (0644, rw-r--r--). 2013-10-01 11:00:02,5, smsd: Outgoing file checker has started. PID: 30283. 2013-10-01 11:00:02,5, sms-gateway: Modem handler 0 has started. PID: 30285. 2013-10-01 11:00:02,5, sms-gateway: Using check_memory_method 1: CPMS is used. 2013-10-01 11:02:04,3, sms-gateway: Modem is not ready to answer commands (Timeouts: 0) 2013-10-01 11:04:21,3, sms-gateway: Modem is not ready to answer commands (Timeouts: 0) 2013-10-01 11:06:39,3, sms-gateway: Modem is not ready to answer commands (Timeouts: 0) 2013-10-01 11:08:56,3, sms-gateway: Modem is not ready to answer commands (Timeouts: 0) 2013-10-01 11:11:14,3, sms-gateway: Modem is not ready to answer commands (Timeouts: 0) 2013-10-01 11:13:31,3, sms-gateway: Modem is not ready to answer commands (Timeouts: 0) 2013-10-01 11:15:49,3, sms-gateway: Modem is not ready to answer commands (Timeouts: 0) 2013-10-01 11:18:06,3, sms-gateway: Modem is not ready to answer commands (Timeouts: 0) 2013-10-01 11:20:24,3, sms-gateway: Modem is not ready to answer commands (Timeouts: 0)

And the smsd.conf:
# Example smsd.conf. Read the manual for a description devices = sms-gateway incoming = /var/spool/sms/incoming sent = /var/spool/sms/sent logfile = /var/log/smsd.log loglevel = 5 [sms-gateway] device = @172.16.*.*:5000 incoming = yes baudrate = 230400 send_delay = 10 rtscts = no cs_convert = no report = no regular_run_interval = 60 regular_run_cmd = AT+CREG?;+CSQ;+COPS?

The problem is, that we need the SMS Modem for our high critical infrastructure services.
So it would be a pleasure, if you could help us, to fix this problem.

Kind regards,
NOC