|
|
| SMS Server Tools 3 Community |
| Welcome, Guest. The forum is currently read-only, but will open soon. |
Thu Nov 21, 2024 21:46 |
Login and Post Reply
Page: 1
| Author |
Post |
|
|
#1 Tue Oct 01, 2013 13:23, 135 months ago.
|
|
Member
Registered:
Apr 2011
Location: Viseu / Viseu / Portugal, Portugal
|
Operating system name and version: CENTOS 5 - Elastix Version of smsd: 3.1.15 Smsd installed from: sources Name and model of a modem / phone: Huawei E220 & Huawei E1550 Interface: USB I'm experiencing problems with CGSN & IMSI! Look at this log I'm getting CMS Error 500 - Unkonwn Error from vodafone modem (huawei E1550) Huawei E220 works fine here is my conf [Optimus]
device = /dev/ttyUSB0
init = AT^CURC=0
memory_start=0
incoming = yes
queues = optimus
report = yes
smsc = +35193121314
baudrate = 19200
[Vodafone]
device = /dev/ttyUSB1
init = AT^CURC=0
memory_start=0
incoming = yes
queues = vodafone
report = yes
smsc = +351911616161
baudrate = 19200 'smsdconf' Syntax Highlight powered by GeSHi
|
|
|
#2 Tue Oct 01, 2013 18:05, 135 months ago.
|
|
Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
|
Your /dev/ttyUSB0 and ttyUSB1 are for the same modem. Just check with dmesg which ports are created for the second modem.
If you do not have dmesg information, disconnect the second modem and see ls -ltr /dev/ttyUSB*. Porst listed are for the first modem. Then reconnect the second modem, and list ports again.
|
|
|
#3 Wed Oct 02, 2013 01:29, 135 months ago.
|
|
Member
Registered:
Apr 2011
Location: Viseu / Viseu / Portugal, Portugal
Topic owner
|
Hi Keke! Thanks for your reply! You were right. This Huawei E1550 was flashed by a friend to unlock it! I've took it and pluged on my laptop. Work at first time, got network and sudenly lost network again. It's behavior is not normal. Probably a bad flash (very bad i say)  ! I'll have to wait for the other E220 that's on it's way! After that i'll let you know. Here is the log ls -ltr /dev/ttyUSB*dmesg | grep usb |
|
|
#4 Thu Oct 03, 2013 18:17, 135 months ago.
|
|
Member
Registered:
Apr 2011
Location: Viseu / Viseu / Portugal, Portugal
Topic owner
|
@Keke, i need your help, please! After all, the Huawei E1550 was flashed well. Linux it's not identifying well the modems. Now i have 2 Huawei E220 and 1 E1550. One of the E220 (optimus) is working well without any problem. The other E220 (tmn) an E1550 (vodafone), linux doesn't interpretate well the modem. It gives them as usb storage and it doesn't convert them to modem. (I think) I think that's someting with modprobe but i don't know how to do this. After googling a while, can't found nothing concrete to change this. When i do ls -ltr /dev/ttyUSB* i get this: ls -ltr /dev/ttyUSB* crw-rw---- 1 root uucp 188, 0 Out 3 13:10 /dev/ttyUSB0 crw-rw---- 1 root uucp 188, 1 Out 3 13:10 /dev/ttyUSB1 And a dmesg | grep usbThank you for your help in this matter! |
|
|
#5 Thu Oct 03, 2013 18:41, 135 months ago.
|
|
Member
Registered:
Apr 2011
Location: Viseu / Viseu / Portugal, Portugal
Topic owner
|
lsmod | grep usb usbserial 33065 1 option usb_storage 80929 0 scsi_mod 144277 13 be2iscsi,ib_iser,iscsi_tcp,bnx2i,libcxgbi,libiscsi2,scsi_transport_iscsi2,scsi_dh,sr_mod,sg,usb_storage,libata,sd_mod |
|
|
#6 Sun Oct 06, 2013 15:10, 135 months ago.
|
|
Member
Registered:
Apr 2011
Location: Viseu / Viseu / Portugal, Portugal
Topic owner
|
@Keke
[SOLVED]
I've disabled the initial PIN REQUEST on SIM CARD.
It's now working perfectly! No more errors or usb-storage, etc.
Queues are working fine, without any problems.
|
Login and Post Reply
Page: 1
Time in this board is UTC.
|
|
|
 |
|
|
 |
|
