SMSTools3 Help and support

Debian 7: Debian Raspberry Pi
Latest:
Smsd installed from: sources /
Huawie E173e:
Interface: usb

had this working today done no changes and boom it's moving stuff to sent but never sending.

Any ideas?

2015-06-01 13:32:28,6, wavecom: No SMS received
2015-06-01 13:32:29,6, wavecom: Checking device for incoming SMS
2015-06-01 13:32:29,6, wavecom: Checking if modem is ready
2015-06-01 13:32:30,7, wavecom: -> AT
2015-06-01 13:32:30,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:30,7, wavecom: <- OK
2015-06-01 13:32:30,6, wavecom: Pre-initializing modem
2015-06-01 13:32:30,7, wavecom: -> ATE0+CMEE=1;+CREG=2
2015-06-01 13:32:30,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:30,7, wavecom: <- OK
2015-06-01 13:32:30,6, wavecom: Initializing modem
2015-06-01 13:32:31,7, wavecom: -> AT+CNMI=2,0,0,2,1
2015-06-01 13:32:31,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:31,7, wavecom: <- OK
2015-06-01 13:32:31,7, wavecom: -> AT+CSQ
2015-06-01 13:32:31,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:31,7, wavecom: <- +CSQ: 8,99 OK
2015-06-01 13:32:31,6, wavecom: Signal Strength Indicator: (8,99) -97 dBm (Marginal), Bit Error Rate: not known or not detectable
2015-06-01 13:32:32,7, wavecom: -> AT+CSQ
2015-06-01 13:32:32,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:32,7, wavecom: <- +CSQ: 7,99 OK
2015-06-01 13:32:32,6, wavecom: Signal Strength Indicator: (7,99) -99 dBm (Marginal), Bit Error Rate: not known or not detectable
2015-06-01 13:32:32,6, wavecom: Checking if Modem is registered to the network
2015-06-01 13:32:32,7, wavecom: -> AT+CREG?
2015-06-01 13:32:32,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:32,7, wavecom: <- +CREG: 2,1, 525F, 97F4 OK
2015-06-01 13:32:32,6, wavecom: Modem is registered to the network
2015-06-01 13:32:32,6, wavecom: Selecting PDU mode
2015-06-01 13:32:33,7, wavecom: -> AT+CMGF=0
2015-06-01 13:32:33,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:33,7, wavecom: <- OK
2015-06-01 13:32:33,6, wavecom: Checking memory size
2015-06-01 13:32:33,7, wavecom: -> AT+CPMS?
2015-06-01 13:32:33,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:33,7, wavecom: <- +CPMS: "SM",1,10,"SM",1,10,"SM",1,10 OK
2015-06-01 13:32:33,6, wavecom: Used memory is 1 of 10
2015-06-01 13:32:33,6, wavecom: Trying to get stored message 1
2015-06-01 13:32:34,7, wavecom: -> AT+CMGR=1
2015-06-01 13:32:34,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:34,7, wavecom: <- OK
2015-06-01 13:32:34,6, wavecom: Trying to get stored message 2
2015-06-01 13:32:34,7, wavecom: -> AT+CMGR=2
2015-06-01 13:32:34,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:34,7, wavecom: <- OK
2015-06-01 13:32:34,6, wavecom: Trying to get stored message 3
2015-06-01 13:32:35,7, wavecom: -> AT+CMGR=3
2015-06-01 13:32:35,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:35,7, wavecom: <- OK
2015-06-01 13:32:35,6, wavecom: Trying to get stored message 4
2015-06-01 13:32:35,7, wavecom: -> AT+CMGR=4
2015-06-01 13:32:35,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:35,7, wavecom: <- OK
2015-06-01 13:32:35,6, wavecom: Trying to get stored message 5
2015-06-01 13:32:36,7, wavecom: -> AT+CMGR=5
2015-06-01 13:32:36,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:36,7, wavecom: <- OK
2015-06-01 13:32:36,6, wavecom: Trying to get stored message 6
2015-06-01 13:32:36,7, wavecom: -> AT+CMGR=6
2015-06-01 13:32:36,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:36,7, wavecom: <- OK
2015-06-01 13:32:36,6, wavecom: Trying to get stored message 7
2015-06-01 13:32:37,7, wavecom: -> AT+CMGR=7
2015-06-01 13:32:37,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:37,7, wavecom: <- OK
2015-06-01 13:32:37,6, wavecom: Trying to get stored message 8
2015-06-01 13:32:37,7, wavecom: -> AT+CMGR=8
2015-06-01 13:32:37,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:37,7, wavecom: <- OK
2015-06-01 13:32:37,6, wavecom: Trying to get stored message 9
2015-06-01 13:32:38,7, wavecom: -> AT+CMGR=9
2015-06-01 13:32:38,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:38,7, wavecom: <- OK
2015-06-01 13:32:38,6, wavecom: Trying to get stored message 10
2015-06-01 13:32:38,7, wavecom: -> AT+CMGR=10
2015-06-01 13:32:38,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:38,7, wavecom: <- +CMS ERROR: 321  (Invalid memory index)
2015-06-01 13:32:38,6, wavecom: Changing memory
2015-06-01 13:32:39,7, wavecom: -> AT+CPMS="SR"
2015-06-01 13:32:39,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:39,7, wavecom: <- +CPMS: 0,5,1,10,1,10 OK
2015-06-01 13:32:39,6, wavecom: Checking memory size
2015-06-01 13:32:39,7, wavecom: -> AT+CPMS?
2015-06-01 13:32:39,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:39,7, wavecom: <- +CPMS: "SR",0,5,"SM",1,10,"SM",1,10 OK
2015-06-01 13:32:39,6, wavecom: Used memory is 0 of 5
2015-06-01 13:32:39,6, wavecom: Changing memory
2015-06-01 13:32:40,7, wavecom: -> AT+CPMS="SM"
2015-06-01 13:32:40,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:40,7, wavecom: <- +CPMS: 1,10,1,10,1,10 OK
2015-06-01 13:32:40,6, wavecom: No SMS received
2015-06-01 13:32:41,6, wavecom: Checking device for incoming SMS
2015-06-01 13:32:41,6, wavecom: Checking if modem is ready
2015-06-01 13:32:41,7, wavecom: -> AT
2015-06-01 13:32:41,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:41,7, wavecom: <- OK
2015-06-01 13:32:41,6, wavecom: Pre-initializing modem
2015-06-01 13:32:42,7, wavecom: -> ATE0+CMEE=1;+CREG=2
2015-06-01 13:32:42,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:42,7, wavecom: <- OK
2015-06-01 13:32:42,6, wavecom: Initializing modem
2015-06-01 13:32:42,7, wavecom: -> AT+CNMI=2,0,0,2,1
2015-06-01 13:32:42,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:42,7, wavecom: <- OK
2015-06-01 13:32:43,7, wavecom: -> AT+CSQ
2015-06-01 13:32:43,7, wavecom: Command is sent, waiting for the answer
2015-06-01 13:32:43,7, wavecom: <- +CSQ: 8,99 OK
2015-06-01 13:32:43,6, wavecom: Signal Strength Indicator: (8,99) -97 dBm (Marginal), Bit Error Rate: not known or not detectable

[ Select ]

[ Expand ]

smsd.conf

# Global configuration

devices = wavecom

outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
delaytime = 1
errorsleeptime = 4
blocktime = 180
autosplit = 3
receive_before_send = no
national_prefixes = 0
# Modem configuration
phonecalls = /var/spool/sms/phonecalls
hangup_incoming_call = yes
voicecall_hangup_ath = no
# wavecom USB
[wavecom]
init = AT+CNMI=2,0,0,2,1
#init = AT+CNMI=1,0,0,2,0
#init = AT
init2 = AT+CSQ
device = /dev/ttyUSB0
incoming = yes
baudrate = 115200
report = no
primary_memory = SM
secondary_memory = SR
eventhandler = /usr/local/bin/sms/index.php
logfile = /var/log/smstools/smsd.log
 

[ Select ]

[ Expand ]