Ubuntu 14.04 lts 64 bit:
Version of smsd 3.1.15:
Smsd installed from: / package repository /
[bSierra Wireless Airlink GL6110 (USB) programmable modem:
Interface: USB
Hello,
modem usb gl6110, now want to set up transmission via SMS - smstools,
system ubuntu 14.04 lts 64bit
Version of smsd 3.1.15
Modem does not send SMS ,
write an error
2015-09-08 10:09:07,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.J8rUuj /tmp/smsd_data.v2OiBa
2015-09-08 10:09:07,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2015-09-08 10:09:07,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2015-09-08 10:09:07,5, smsd: Outgoing file checker has started. PID: 5070.
2015-09-08 10:09:07,7, smsd: All PID's: 5070,5072
2015-09-08 10:09:07,5, GSM1: Modem handler 0 has started. PID: 5072.
2015-09-08 10:09:07,5, GSM1: Using check_memory_method 1: CPMS is used.
2015-09-08 10:09:07,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/send_6AWSjH
2015-09-08 10:09:07,6, GSM1: Sending SMS from to 995568804950
2015-09-08 10:09:07,6, GSM1: Checking if modem is ready
2015-09-08 10:09:07,7, GSM1: -> AT
2015-09-08 10:09:07,7, GSM1: Command is sent, waiting for the answer
2015-09-08 10:09:12,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 1.
2015-09-08 10:09:12,7, GSM1: <-
2015-09-08 10:09:12,7, GSM1: -> .
if you can, tell me how to solve this , the code below of smsd.conf
devices = GSM1
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
logfile = /var/log/smstools/smsd.log
loglevel = 7
delaytime = 10
errorsleeptime = 10
autosplit = 3
[GSM1]
device = /dev/ttyACM0
incoming = yes
mode = new
baudrate = 115200
pin = ignore
rtscts = yes
cs_convert = yes
report = yes
sending_disabled = no
memory_start = 1
Best Reagsrds, Satcom
|
|