Operating system name and version: Windows 7 - cygwin
Version of smsd: last
Smsd installed from: sources
Name and model of a modem / phone: wavecome
Interface: serial

Hello.
Sorry for my English, is not my native language.

Help me.
How to configure two modem that the first modem sent to the phones of "MTS" provider, and the latter on phones "MEGAFON" provider?
I know that there is such a function, but I can't figure out how to set it up?

This is my config file.

devices = GSM1 checked = /var/spool/sms/checked failed = /var/spool/sms/failed incoming = /var/spool/sms/incoming outgoing = /var/spool/sms/outgoing phonecalls = /var/spool/sms/phonecalls report = /var/spool/sms/report sent = /var/spool/sms/sent stats = /var/spool/sms/stats logfile = /var/log/smsd.log loglevel = 7 infofile = /var/run/smsd/smsd.working pidfile = /var/run/smsd/smsd.pid checkhandler = /usr/local/bin/shto eventhandler = /usr/local/bin/shfrom # With value 1 like 2007-09-02.GSM1.xxxxxx and # With value 2 like GSM1.2007-09-02.xxxxxx date_filename = 1 hangup_incoming_call = yes [GSM1] device = /dev/ttyS0 baudrate = 115200 rtscts = yes init = AT init2 = AT+CPMS="ME","ME","ME" incoming = yes outgoing = yes report = yes

Ok. I understand how to do what I need.

My smsd.conf

devices = GSM1_MFON, GSM2_MTSS checked = /var/spool/sms/checked failed = /var/spool/sms/failed incoming = /var/spool/sms/incoming outgoing = /var/spool/sms/outgoing phonecalls = /var/spool/sms/phonecalls report = /var/spool/sms/report sent = /var/spool/sms/sent stats = /var/spool/sms/stats logfile = /var/log/smsd.log loglevel = 7 infofile = /var/run/smsd/smsd.working pidfile = /var/run/smsd/smsd.pid checkhandler = /usr/local/bin/shto eventhandler = /usr/local/bin/shfrom # With value 1 like 2007-09-02.GSM1.xxxxxx and # with value 2 like GSM1.2007-09-02.xxxxxx date_filename = 1 hangup_incoming_call = yes [queues] ALL = /var/spool/sms/checked GSM1_MFON = /var/spool/sms/GSM1_MFON GSM2_MTSS = /var/spool/sms/GSM2_MTSS [GSM1_MFON] queues = GSM1_MFON, ALL device = /dev/ttyS0 baudrate = 9600 rtscts = yes init = AT incoming = yes outgoing = yes report = yes [GSM2_MTSS] queues = GSM2_MTSS, ALL device = /dev/ttyS1 baudrate = 115200 rtscts = yes init = AT init2 = AT+CPMS="ME","ME","ME" incoming = yes outgoing = yes report = yes

and my sms

To: +7924XXXXXXX Queue: GSM2_MTSS Obj: 122972 Dtm: 2017-10-17 14:01:39 Alphabet: Unicode Program is started!(17.10 14:01 PROG)

2017-10-18 14:00:22,3, GSM1_MFON: write_to_modem: error 13: Permission denied

What is this error?

OK. I realized my mistake.
It was necessary in the settings to put "rtscts = no" for GSM1_MFON.
Or to configure the modem that will be correct.