SMSTools3 Help and support

Welcome, Guest. The forum is currently read-only, but will open soon.

Fri Nov 22, 2024 03:46

• SMSTools3 Community » Help and support

[fixed in 3.1.14] sent messages

This topic is locked

Page: 1

Author	Post
beremour	Bottom #1 Mon Sep 20, 2010 13:28, 172 months ago.
Member Registered: Sep 2010 Posts: 10 Location: Russian Federation	Operating system name and version: OpenBSD 4.7 Version of smsd: 3.1.12 Smsd installed from: sources Name and model of a modem / phone: Siemens M35 Interface: serial I have sent folder configured in smsd.conf to have copies of sent messages "sent = /var/spool/sms/sent", but sent folder remains empty Version 3.1.8 installed before on my site worked as expected What i am missing?
keke	Top #2 Mon Sep 20, 2010 13:40, 172 months ago.
Administrator Registered: May 2009 Posts: 2070 Location: Jyväskylä, Finland	There should not be difference between those versions of smsd. Can you show the smsd.conf file? After a message is sent, what is in the smsd.log?
beremour	Top #3 Mon Sep 20, 2010 13:52, 172 months ago.
Member Registered: Sep 2010 Posts: 10 Location: Russian Federation Topic owner	Log: smsd: Smsd v3.1.12 started. smsd: Running as root:wheel. smsd: File mode creation mask: 022 (0644, rw-r--r--). smsd: Outgoing file checker has started. PID: 5713. GSM1: Modem handler 0 has started. PID: 5179. GSM1: Using check_memory_method 1: CPMS is used. GSM1: CGSN: 35385701684xxxx GSM1: IMSI: 25001070505xxxx smsd: Moved file /var/spool/sms/outgoing/smsd_1tLMzX to /var/spool/sms/queue/MTS smsd: Moved file /var/spool/sms/outgoing/smsd_XARAjB to /var/spool/sms/queue/MTS smsd: Moved file /var/spool/sms/outgoing/smsd_rKsz4Z to /var/spool/sms/queue/MTS GSM1: SMS sent, Message_id: 40, To: 7989958xxxx, sending time 6 sec. GSM1: SMS sent, Message_id: 41, To: 7917344xxxx, sending time 5 sec. GSM1: SMS sent, Message_id: 42, To: 7927313xxxx, sending time 5 sec. GSM1: SMS received (report, Message_id: 40, Status: 0), From: 7989958xxxx GSM1: SMS received (report, Message_id: 41, Status: 0), From: 7917344xxxx GSM1: SMS received (report, Message_id: 42, Status: 0), From: 7927313xxxx smsd.conf: devices = GSM1 outgoing = /var/spool/sms/outgoing checked = /var/spool/sms/checked failed = /var/spool/sms/failed incoming = /var/spool/sms/incoming report = /var/spool/sms/report sent = /var/spool/sms/sent #mypath = /usr/local/bin logfile = /var/log/smsd.log loglevel = 5 smart_logging = yes #alarmhandler = /usr/local/bin/alarmevent alarmlevel = 4 delaytime = 10 errorsleeptime = 10 blocktime = 3600 #blockafter = 3 #eventhandler = /usr/local/bin/smsevent stats = /var/spool/sms/stats #stats_interval = 3600 #stats_no_zeroes = no #blacklist = /etc/smsd.black #whitelist = /etc/smsd.white #checkhandler = /usr/local/bin/smscheck receive_before_send = no # autosplit 0=no 1=yes 2=with text numbers 3=concatenated autosplit = 3 # store_received_pdu 0=no, 1=unsupported, 2=unsupported and 8bit, 3=all #store_received_pdu = 1 #validity = 255 #decode_unicode_text = no #internal_combine = no #user = smsd #group = dialout infofile = /var/run/smsd.working pidfile = /var/run/smsd.pid keep_filename = yes store_original_filename = yes #regular_run = /var/spool/sms/regular_run #regular_run_interval = 300 #admin_to = (number) #terminal = no #filename_preview = 80 #incoming_utf8 = yes [queues] # Commented lines are examples for germany # D1 = /var/spool/sms/D1 # D2 = /var/spool/sms/D2 # O2 = /var/spool/sms/O2 # EPLUS = /var/spool/sms/EPLUS # QUAM = /var/sppol/sms/QUAM # MOBILCOM = /var/spool/sms/MOBILCOM # OTHER = /var/spool/sms/OTHER MTS = /var/spool/sms/queue/MTS [provider] # Commented lines are examples for germany # D1 = 49160, 49170, 49171, 49175, 49151 # D2 = 491520, 49162, 49172, 49173, 49174 # O2 = 49176, 49179, 49159 # EPLUS = 49163, 49177, 49178, 49157 # QUAM = 49150 # MOBILCOM = 49156 # OTHER = 0,1,2,3,4,5,6,7,8,9 MTS = 0,1,2,3,4,5,6,7,8,9 [GSM1] # init = ATE0+CPMS="SM"+CNMI=2,0,0,2,1 device = /dev/cua00 incoming = yes queues = MTS #You don't need a PIN for mobile phones #pin = 1111 mode = new #smsc = 491722270000 baudrate = 19200 rtscts = yes cs_convert = yes report = yes memory_start = 1 #eventhandler = /usr/local/bin/smsevent #primary_memory = memory name #terminal = no #filename_preview = 80 #incoming_utf8 = yes [queues] # Commented lines are examples for germany # D1 = /var/spool/sms/D1 # D2 = /var/spool/sms/D2 # O2 = /var/spool/sms/O2 # EPLUS = /var/spool/sms/EPLUS # QUAM = /var/sppol/sms/QUAM # MOBILCOM = /var/spool/sms/MOBILCOM # OTHER = /var/spool/sms/OTHER MTS = /var/spool/sms/queue/MTS [provider] # Commented lines are examples for germany # D1 = 49160, 49170, 49171, 49175, 49151 # D2 = 491520, 49162, 49172, 49173, 49174 # O2 = 49176, 49179, 49159 # EPLUS = 49163, 49177, 49178, 49157 # QUAM = 49150 # MOBILCOM = 49156 # OTHER = 0,1,2,3,4,5,6,7,8,9 MTS = 0,1,2,3,4,5,6,7,8,9 [GSM1] # init = ATE0+CPMS="SM"+CNMI=2,0,0,2,1 device = /dev/cua00 incoming = yes queues = MTS #You don't need a PIN for mobile phones #pin = 1111 mode = new #smsc = 491722270000 baudrate = 19200 rtscts = yes cs_convert = yes report = yes memory_start = 1 #eventhandler = /usr/local/bin/smsevent #primary_memory = memory name #secondary_memory = memory name #secondary_memory_max = number #pdu_from_file = /var/spool/sms/GSM1-PDU #sending_disabled = yes #decode_unicode_text = no #internal_combine = no #pinsleeptime = 5 #admin_to = (number) #message_limit = 20 #message_count_clear = 60 [ Select ] [ Expand ] 'smsdconf' Syntax Highlight powered by GeSHi « Last edit by keke on Mon Sep 20, 2010 14:37, 172 months ago. »
keke	Top #4 Mon Sep 20, 2010 15:21, 172 months ago.
Administrator Registered: May 2009 Posts: 2070 Location: Jyväskylä, Finland	I do not see why it does not work on your server. At least it works on OpenBSD 4.5, which was installed February 2009 (not upgraded after that). You could change the loglevel to 6 and try once again after restarting the smsd. In the log the should then be either "Moved file..." or "Deleted file..." message.
beremour	Top #5 Mon Sep 20, 2010 15:43, 172 months ago.
Member Registered: Sep 2010 Posts: 10 Location: Russian Federation Topic owner	sorry, still dont see moving to "sent" phrase in log and folder also empty # ls -l /var/spool/sms/sent /var/log/smsd.log: smsd: Smsd v3.1.12 started. smsd: Running as root:wheel. smsd: File mode creation mask: 022 (0644, rw-r--r--). smsd: Outgoing file checker has started. PID: 16254. GSM1: Modem handler 0 has started. PID: 13401. GSM1: Using check_memory_method 1: CPMS is used. GSM1: Checking device for incoming SMS GSM1: Checking if modem is ready GSM1: Pre-initializing modem GSM1: Checking if modem needs PIN GSM1: Signal Strength Indicator: (23,99) -67 dBm (Excellent), Bit Error Rate: not known or not detectable GSM1: Checking if Modem is registered to the network GSM1: Modem is registered to the network GSM1: Selecting PDU mode GSM1: CGSN: 35385701684XXXX GSM1: IMSI: 25001070505XXXX GSM1: Checking if reading of messages is supported GSM1: Checking memory size GSM1: Used memory is 0 of 45 GSM1: No SMS received GSM1: Checking device for incoming SMS GSM1: Checking if modem is ready GSM1: Pre-initializing modem GSM1: Signal Strength Indicator: (23,99) -67 dBm (Excellent), Bit Error Rate: not known or not detectable GSM1: Checking if Modem is registered to the network GSM1: Modem is registered to the network GSM1: Selecting PDU mode GSM1: Checking memory size GSM1: Used memory is 0 of 45 GSM1: No SMS received smsd: Moved file /var/spool/sms/outgoing/smsd_DNw6ID to /var/spool/sms/queue/MTS GSM1: I have to send 1 short message for /var/spool/sms/queue/MTS/smsd_DNw6ID GSM1: Sending SMS from to 7989958XXXX GSM1: Checking if modem is ready GSM1: Pre-initializing modem GSM1: Signal Strength Indicator: (23,99) -67 dBm (Excellent), Bit Error Rate: not known or not detec GSM1: Checking if Modem is registered to the network GSM1: Modem is registered to the network GSM1: Selecting PDU mode GSM1: SMS sent, Message_id: 46, To: 7989958XXXX, sending time 7 sec. GSM1: Moved file /var/spool/sms/queue/MTS/smsd_DNw6ID to GSM1: Checking device for incoming SMS GSM1: Checking memory size GSM1: Used memory is 0 of 45 GSM1: No SMS received GSM1: Checking device for incoming SMS GSM1: Checking memory size GSM1: Used memory is 0 of 45 GSM1: No SMS received GSM1: Checking device for incoming SMS GSM1: Checking if modem is ready GSM1: Pre-initializing modem GSM1: Signal Strength Indicator: (23,99) -67 dBm (Excellent), Bit Error Rate: not known or not detectable GSM1: Checking if Modem is registered to the network GSM1: Modem is registered to the network GSM1: Selecting PDU mode GSM1: Checking memory size GSM1: Used memory is 1 of 45 GSM1: Trying to get stored message 1 GSM1: SMS received (report, Message_id: 46, Status: 0), From: 7989958XXXX GSM1: Wrote an incoming message file: /var/spool/sms/report/GSM1.hQbnBl GSM1: Deleting message 1 GSM1: Checking device for incoming SMS GSM1: Checking memory size GSM1: Used memory is 0 of 45 GSM1: No SMS received GSM1: Checking device for incoming SMS GSM1: Checking if modem is ready GSM1: Pre-initializing modem GSM1: Signal Strength Indicator: (23,99) -67 dBm (Excellent), Bit Error Rate: not known or not detectable GSM1: Checking if Modem is registered to the network GSM1: Modem is registered to the network GSM1: Selecting PDU mode GSM1: Checking memory size GSM1: Used memory is 0 of 45 GSM1: No SMS received [ Select ] [ Expand ]
beremour	Top #6 Mon Sep 20, 2010 15:50, 172 months ago.
Member Registered: Sep 2010 Posts: 10 Location: Russian Federation Topic owner	# uname -mpvsr OpenBSD 4.7 GENERIC.MP#130 amd64 Intel(R) Xeon(R) CPU X3430 @ 2.40GHz #
keke	Top #7 Mon Sep 20, 2010 15:57, 172 months ago.
Administrator Registered: May 2009 Posts: 2070 Location: Jyväskylä, Finland	There is: GSM1: Moved file /var/spool/sms/queue/MTS/smsd_DNw6ID to [ Select ] It's missing a filename. Can you verify from the log that there surely was no filename after "to"? I'm trying to check what causes this error...
beremour	Top #8 Mon Sep 20, 2010 16:06, 172 months ago.
Member Registered: Sep 2010 Posts: 10 Location: Russian Federation Topic owner	I've checked it: it's really empty, no filename after "to" I've noticed one more thing: /tmp is not empty and files looks quite like "sent" ones # ls -ld /tmp drwxrwxrwt 5 root wheel 512 Sep 20 21:35 /tmp # ls -l /tmp total 84 drwxrwxrwt 2 root wheel 512 Jun 15 21:50 .ICE-unix drwxrwxrwt 2 root wheel 512 Jun 15 21:50 .X11-unix drwx------ 2 root wheel 512 Sep 20 21:26 mc-root -rw-r--r-- 1 root wheel 148 Sep 20 17:49 smsd.0b4n62 -rw-r--r-- 1 root wheel 149 Sep 20 21:35 smsd.6vFBOn -rw-r--r-- 1 root wheel 148 Sep 20 18:07 smsd.9MHbqR -rw-r--r-- 1 root wheel 148 Sep 20 17:48 smsd.ODFahD -rw-r--r-- 1 root wheel 149 Sep 20 15:44 smsd.Pb5yR7 -rw-r--r-- 1 root wheel 149 Sep 20 15:05 smsd.VMX6R8 -rw-r--r-- 1 root wheel 148 Sep 20 17:55 smsd.WxyvP0 -rw-r--r-- 1 root wheel 149 Sep 20 19:49 smsd.bFRmBE -rw-r--r-- 1 root wheel 149 Sep 20 15:44 smsd.bL5GKI -rw-r--r-- 1 root wheel 148 Sep 20 18:07 smsd.cYOIpd -rw-r--r-- 1 root wheel 148 Sep 20 17:55 smsd.hMjyn3 -rw-r--r-- 1 root wheel 149 Sep 20 12:00 smsd.hNj9N0 -rw-r--r-- 1 root wheel 149 Sep 20 15:16 smsd.k4BDi6 -rw-r--r-- 1 root wheel 149 Sep 20 21:30 smsd.sXzHnI -rw-r--r-- 1 root wheel 149 Sep 20 21:33 smsd.uKWz0q -rw-r--r-- 1 root wheel 149 Sep 20 21:24 smsd.wBEEkl -rw-r--r-- 1 root wheel 149 Sep 20 19:49 smsd.xlQgcY -rw-r--r-- 1 root wheel 149 Sep 20 19:49 smsd.y19KlW [ Select ] [ Expand ]
keke	Top #9 Mon Sep 20, 2010 16:17, 172 months ago.
Administrator Registered: May 2009 Posts: 2070 Location: Jyväskylä, Finland	I'm testing this now with a newly installed OpenBSD 4.7. At least I was able to reproduce this issue, which did not happen with 4.5.
keke	Top #10 Mon Sep 20, 2010 17:30, 172 months ago.
Administrator Registered: May 2009 Posts: 2070 Location: Jyväskylä, Finland	Okay, there is rename() function used, and at least on OpenBSD 4.7 it did not move file between different mounts. Here is a quick fix: In the file smsd.c, search (tmp_filename. You will find the following: // 3.1.12: //sprintf(tmp_filename,"%s.XXXXXX", filename); sprintf(tmp_filename,"/tmp/smsd.XXXXXX"); Change the third line to: sprintf(tmp_filename,"/var/spool/sms/smsd.XXXXXX"); Save, recompile and run. Thank's for reporting this issue. I have to check later if there are another places which should be changed too. This causes that version 3.1.14 should be published within a few days including this fix.
beremour	Top #11 Mon Sep 20, 2010 17:38, 172 months ago.
Member Registered: Sep 2010 Posts: 10 Location: Russian Federation Topic owner	Thank you very much for greate App!) I am at home now, tomorrow I'll recompile and reinstall
beremour	Top #12 Tue Sep 21, 2010 09:56, 172 months ago.
Member Registered: Sep 2010 Posts: 10 Location: Russian Federation Topic owner	OK) it works
keke	Top #13 Tue Sep 21, 2010 11:52, 172 months ago.
Administrator Registered: May 2009 Posts: 2070 Location: Jyväskylä, Finland	Thanks. There is also 3.1.14 now available, including a fix for this issue.

This topic is locked

Page: 1

• SMSTools3 Community » Help and support

Top

Time in this board is UTC.