Operating system name and version: Ubuntu 10.04
Version of smsd: 3.1.14
Smsd installed from: sources
Name and model of a modem / phone: Teltonika G10
Interface: USB

Hi all,

I have a problem that smsd does not accept my pin. I've tried with 2 different sim card without success.

This is what the log says:

2010-10-28 14:14:17,2, smsd: Smsd v3.1.14 started. 2010-10-28 14:14:17,2, smsd: Running as root:root. 2010-10-28 14:14:17,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.EJ7GK1 /tmp/smsd_data.ppfsJk 2010-10-28 14:14:17,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0) 2010-10-28 14:14:17,4, smsd: File mode creation mask: 022 (0644, rw-r--r--). 2010-10-28 14:14:17,5, smsd: Outgoing file checker has started. PID: 1029. 2010-10-28 14:14:17,7, smsd: All PID's: 1029,1030 2010-10-28 14:14:17,5, GSM1: Modem handler 0 has started. PID: 1030. 2010-10-28 14:14:17,5, GSM1: Using check_memory_method 1: CPMS is used. 2010-10-28 14:14:17,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/send_muttzO 2010-10-28 14:14:17,6, GSM1: Sending SMS from to 49xxxxxxxxxxx 2010-10-28 14:14:17,6, GSM1: Checking if modem is ready 2010-10-28 14:14:18,7, GSM1: -> AT 2010-10-28 14:14:18,7, GSM1: Command is sent, waiting for the answer 2010-10-28 14:14:19,7, GSM1: <- +GCAP: +FCLASS,+CGSM OK 2010-10-28 14:14:19,6, GSM1: Pre-initializing modem 2010-10-28 14:14:19,7, GSM1: -> ATE0+CMEE=1;+CREG=2 2010-10-28 14:14:19,7, GSM1: Command is sent, waiting for the answer 2010-10-28 14:14:20,7, GSM1: <- +GCAP: +FCLASS,+CGSM OK 2010-10-28 14:14:20,6, GSM1: Checking if modem needs PIN 2010-10-28 14:14:20,7, GSM1: -> AT+CPIN? 2010-10-28 14:14:20,7, GSM1: Command is sent, waiting for the answer 2010-10-28 14:14:31,7, GSM1: put_command expected (READY)|( PIN)|( PUK)|(ERROR), timeout occurred. 1. 2010-10-28 14:14:31,7, GSM1: <- Undefined OK 2010-10-28 14:14:31,2, GSM1: PIN handling: expected READY, modem answered Undefined OK 2010-10-28 14:14:31,2, GSM1: Modem handler 0 terminated abnormally. PID: 1030. 2010-10-28 14:14:48,5, smsd: Moved file /var/spool/sms/outgoing/send_q0Ghmj to /var/spool/sms/checked

And here is my smsd.conf file:

devices = GSM1
logfile = /var/log/smsd.log
loglevel = 7

[GSM1]
device = /dev/ttyUSB0
incoming = yes
pin = xxxx # (xxxx = my pin of course)
baudrate = 115200

Thanks for your help and best regards,
Matthias

The answer for AT+CPIN? was "Undefined OK". It looks like there is no PIN active in the SIM, but the answer also is incorrect. In that case the answer from the modem should be "READY". However, at least in this post and this post PIN handling has been working properly with Teltonika G10. Probably you have some problem with your SIM cards.

Try with pin = ignore to see how them modem works when PIN is not handled. If you surely had a PIN enabled, you could disable it using the handset.

Thanks for your quick response, Keke;
There was a pin set, I've putted the sim card to a mobile and it asked for a pin.
However, disabling the pin on the handset and setting pin = ignore in smsd.conf did the trick, I can send sms now


I've changed the pin on both sim cards with the same handset before I tried them in the G10.
Propably this handset messes something up when changing the pin.

Thanks again for your help, this really made my day.

Best regards,
Matthias