Version of smsd: 3.1.6
Smsd installed from: package repository
Name and model of a modem / phone: Sierra Wireless Airlink GL6110 (USB) programmable modem
Interface: USB
Have problem with the modem. I have been using gsmsmssend to send sms and now trying to set up smsd to recive sms to my nagios system. The log file give me timeout but when i send sms it init the modem and send the sms. The first time after starting smsd it use to recive the sms but it is the only time it does it.
Here is my config:
devices = GSM1
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
logfile = /var/log/smstools/smsd.log
loglevel = 7
delaytime = 10
errorsleeptime = 10
autosplit = 3
[GSM1]
device = /dev/ttyACM0
incoming = yes
mode = new
smsc = 46705008999
baudrate = 115200
pin = ignore
rtscts = yes
cs_convert = yes
report = yes
sending_disabled = no
memory_start = 1
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
logfile = /var/log/smstools/smsd.log
loglevel = 7
delaytime = 10
errorsleeptime = 10
autosplit = 3
[GSM1]
device = /dev/ttyACM0
incoming = yes
mode = new
smsc = 46705008999
baudrate = 115200
pin = ignore
rtscts = yes
cs_convert = yes
report = yes
sending_disabled = no
memory_start = 1
'smsdconf' Syntax Highlight powered by GeSHi
the log file:
Here I send a sms: