Version of smsd: 3.1.14
Smsd installed from: sources
Name and model of a modem / phone: SIMCOM_SIM300 1008B15SIM300M32_SST34HF3284
Interface: serial
We are trying to use the report function but did not get it to work by now.
As i'm not an expert on GSM-Modems most of the commands do not realy tell me anything.
The config entries are just a summary of tries according to other peoples experience from this forum.
Hope that someone can help us to get this functionality to work.
Unfortunatelly we have not tried if the SIM card works with the report feature before we installed it
at our data center.
Our smsd.conf
devices = GSM1
logfile = /var/log/smsd.log
loglevel = 7
report = /var/spool/sms/report
adminmessage_device = GSM1
admin_to = 4745887479
failed = /var/spool/sms/failed
sent = /var/spool/sms/sent
receive_before_send = yes
logtime_ms = yes
store_received_pdu = 3
store_sent_pdu = 3
incoming_utf8 = yes
[GSM1]
init = AT+CPMS="SM","SM","SM"
primary_memory = SM
secondary_memory = SM
device = /dev/ttyS0
baudrate = 9600
incoming = high
pin = xxxx
report_device_details = yes
cs_convert = yes
report = yes
routed_status_report_cnma = yes
using_routed_status_report = yes
detect_message_routing = yes
logfile = /var/log/smsd.log
loglevel = 7
report = /var/spool/sms/report
adminmessage_device = GSM1
admin_to = 4745887479
failed = /var/spool/sms/failed
sent = /var/spool/sms/sent
receive_before_send = yes
logtime_ms = yes
store_received_pdu = 3
store_sent_pdu = 3
incoming_utf8 = yes
[GSM1]
init = AT+CPMS="SM","SM","SM"
primary_memory = SM
secondary_memory = SM
device = /dev/ttyS0
baudrate = 9600
incoming = high
pin = xxxx
report_device_details = yes
cs_convert = yes
report = yes
routed_status_report_cnma = yes
using_routed_status_report = yes
detect_message_routing = yes
The files we create all contain do not contain any "report" line.
The log-file does not show any item that i could identify as report
2011-05-03 16:10:06.578,2, smsd: Smsd v3.1.14 started.
2011-05-03 16:10:06.578,2, smsd: Running as root:root.
2011-05-03 16:10:06.578,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.VwkWcv /tmp/smsd_data.inpZCx
2011-05-03 16:10:06.583,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2011-05-03 16:10:06.583,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2011-05-03 16:10:06.583,4, smsd: Mainspooler uses GSM1 to send administrative messages.
2011-05-03 16:10:06.583,6, smsd: Using logtime format "%Y-%m-%d %H:%M:%S.timems". It produces "2011-05-03 16:10:06.583".
2011-05-03 16:10:06.583,5, GSM1: Modem handler 0 has started. PID: 9280.
2011-05-03 16:10:06.584,5, GSM1: Using check_memory_method 1: CPMS is used.
2011-05-03 16:10:06.584,6, GSM1: Checking device for incoming SMS
2011-05-03 16:10:06.584,6, GSM1: Checking if modem is ready
2011-05-03 16:10:06.584,5, smsd: Outgoing file checker has started. PID: 9279.
2011-05-03 16:10:06.584,7, smsd: All PID's: 9279,9280
2011-05-03 16:10:06.785,7, GSM1: -> AT
2011-05-03 16:10:06.789,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:07.092,7, GSM1: <- OK
2011-05-03 16:10:07.092,6, GSM1: Pre-initializing modem
2011-05-03 16:10:07.294,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-03 16:10:07.315,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:07.618,7, GSM1: <- OK
2011-05-03 16:10:07.618,6, GSM1: Checking if modem needs PIN
2011-05-03 16:10:07.820,7, GSM1: -> AT+CPIN?
2011-05-03 16:10:07.830,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:08.133,7, GSM1: <- +CPIN: READY OK
2011-05-03 16:10:08.133,6, GSM1: Initializing modem
2011-05-03 16:10:08.340,7, GSM1: -> AT+CPMS="SM","SM","SM"
2011-05-03 16:10:08.365,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:08.685,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:08.917,7, GSM1: -> AT+CSQ
2011-05-03 16:10:08.925,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:09.228,7, GSM1: <- +CSQ: 23,0 OK
2011-05-03 16:10:09.228,6, GSM1: Signal Strength Indicator: (23,0) -67 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:10:09.228,6, GSM1: Checking if Modem is registered to the network
2011-05-03 16:10:09.429,7, GSM1: -> AT+CREG?
2011-05-03 16:10:09.439,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:09.742,7, GSM1: <- +CREG: 2,1,"2EE1","0CC3" OK
2011-05-03 16:10:09.742,6, GSM1: Modem is registered to the network
2011-05-03 16:10:09.742,6, GSM1: Location area code: 2EE1, Cell ID: 0CC3
2011-05-03 16:10:09.944,7, GSM1: -> AT+CSQ
2011-05-03 16:10:09.952,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:10.255,7, GSM1: <- +CSQ: 23,0 OK
2011-05-03 16:10:10.255,6, GSM1: Signal Strength Indicator: (23,0) -67 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:10:10.255,6, GSM1: Selecting PDU mode
2011-05-03 16:10:10.457,7, GSM1: -> AT+CMGF=0
2011-05-03 16:10:10.469,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:10.772,7, GSM1: <- OK
2011-05-03 16:10:10.974,7, GSM1: -> AT+CIMI
2011-05-03 16:10:10.984,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:11.287,7, GSM1: <- 242010410807638 OK
2011-05-03 16:10:11.489,7, GSM1: -> AT+CGSN
2011-05-03 16:10:11.499,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:11.802,7, GSM1: <- 354777032462835 OK
2011-05-03 16:10:11.802,5, GSM1: CGSN: 354777032462835
2011-05-03 16:10:11.802,5, GSM1: IMSI: 242010410807638
2011-05-03 16:10:11.802,6, GSM1: Checking if reading of messages is supported
2011-05-03 16:10:12.004,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:12.014,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:12.317,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:12.317,7, GSM1: ## Start of device details
2011-05-03 16:10:12.317,7, GSM1: # Manufacturer identification:
2011-05-03 16:10:12.519,7, GSM1: -> AT+CGMI
2011-05-03 16:10:12.835,7, GSM1: <- SIMCOM_Ltd
OK
2011-05-03 16:10:12.835,7, GSM1: # Model identification:
2011-05-03 16:10:13.039,7, GSM1: -> AT+CGMM
2011-05-03 16:10:13.361,7, GSM1: <- SIMCOM_SIM300
OK
2011-05-03 16:10:13.361,7, GSM1: # Revision identification:
2011-05-03 16:10:13.587,7, GSM1: -> AT+CGMR
2011-05-03 16:10:13.901,7, GSM1: <- Revision:1008B15SIM300M32_SST34HF3284
OK
2011-05-03 16:10:13.901,7, GSM1: # New message indications, list of supported modes:
2011-05-03 16:10:14.102,7, GSM1: -> AT+CNMI=?
2011-05-03 16:10:14.414,7, GSM1: <- +CNMI: (0-3),(0-3),(0,2),(0-1),(0)
OK
2011-05-03 16:10:14.414,7, GSM1: # New message indications, current settings:
2011-05-03 16:10:14.616,7, GSM1: -> AT+CNMI?
2011-05-03 16:10:14.929,7, GSM1: <- +CNMI: 2,1,0,0,0
OK
2011-05-03 16:10:14.929,7, GSM1: # Preferred message storage, list of supported mem's:
2011-05-03 16:10:15.131,7, GSM1: -> AT+CPMS=?
2011-05-03 16:10:15.446,7, GSM1: <- +CPMS: ("SM"),("SM"),("SM")
OK
2011-05-03 16:10:15.446,7, GSM1: # Phonebook storage, available mem's:
2011-05-03 16:10:15.648,7, GSM1: -> AT+CPBS=?
2011-05-03 16:10:16.064,7, GSM1: <- +CPBS: ("MC","RC","DC","LD","LA","ME","SM","FD","ON","BN","SD","VM")
OK
2011-05-03 16:10:16.064,7, GSM1: # List messages, list of supported stat's:
2011-05-03 16:10:16.266,7, GSM1: -> AT+CMGL=?
2011-05-03 16:10:16.581,7, GSM1: <- +CMGL: (0-4)
OK
2011-05-03 16:10:16.581,7, GSM1: # Delete message, list of supported values:
2011-05-03 16:10:16.783,7, GSM1: -> AT+CMGD=?
2011-05-03 16:10:17.098,7, GSM1: <- +CMGD: (1-25)
OK
2011-05-03 16:10:17.098,7, GSM1: # Phone activity status, list of supported stat's:
2011-05-03 16:10:17.300,7, GSM1: -> AT+CPAS=?
2011-05-03 16:10:17.616,7, GSM1: <- +CPAS: (0,2,3,4)
OK
2011-05-03 16:10:17.616,7, GSM1: # TE character set, list of supported charset's:
2011-05-03 16:10:17.819,7, GSM1: -> AT+CSCS=?
2011-05-03 16:10:18.239,7, GSM1: <- +CSCS: ("GSM","HEX","IRA","PCCP","PCDN","UCS2","8859-1")
OK
2011-05-03 16:10:18.239,7, GSM1: # TE character set, current setting:
2011-05-03 16:10:18.443,7, GSM1: -> AT+CSCS?
2011-05-03 16:10:18.757,7, GSM1: <- +CSCS: "IRA"
OK
2011-05-03 16:10:18.757,7, GSM1: ## End of device details
2011-05-03 16:10:18.757,6, GSM1: Checking memory size
2011-05-03 16:10:18.961,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:18.972,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:19.277,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:19.277,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:19.277,6, GSM1: Changing memory
2011-05-03 16:10:19.480,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:19.495,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:19.801,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:19.801,6, GSM1: Checking memory size
2011-05-03 16:10:20.005,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:20.015,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:20.319,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:20.319,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:20.319,6, GSM1: Changing memory
2011-05-03 16:10:20.522,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:20.537,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:20.841,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:20.841,6, GSM1: No SMS received
2011-05-03 16:10:30.857,6, GSM1: Checking device for incoming SMS
2011-05-03 16:10:30.857,6, GSM1: Checking if modem is ready
2011-05-03 16:10:31.059,7, GSM1: -> AT
2011-05-03 16:10:31.063,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:31.366,7, GSM1: <- OK
2011-05-03 16:10:31.366,6, GSM1: Pre-initializing modem
2011-05-03 16:10:31.568,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-03 16:10:31.590,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:31.893,7, GSM1: <- OK
2011-05-03 16:10:31.893,6, GSM1: Checking if modem needs PIN
2011-05-03 16:10:32.095,7, GSM1: -> AT+CPIN?
2011-05-03 16:10:32.105,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:32.408,7, GSM1: <- +CPIN: READY OK
2011-05-03 16:10:32.408,6, GSM1: Initializing modem
2011-05-03 16:10:32.610,7, GSM1: -> AT+CPMS="SM","SM","SM"
2011-05-03 16:10:32.634,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:32.937,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:33.139,7, GSM1: -> AT+CSQ
2011-05-03 16:10:33.148,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:33.451,7, GSM1: <- +CSQ: 23,0 OK
2011-05-03 16:10:33.451,6, GSM1: Signal Strength Indicator: (23,0) -67 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:10:33.451,6, GSM1: Checking if Modem is registered to the network
2011-05-03 16:10:33.653,7, GSM1: -> AT+CREG?
2011-05-03 16:10:33.663,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:33.966,7, GSM1: <- +CREG: 2,1,"2EE1","0CC3" OK
2011-05-03 16:10:33.966,6, GSM1: Modem is registered to the network
2011-05-03 16:10:33.966,6, GSM1: Selecting PDU mode
2011-05-03 16:10:34.168,7, GSM1: -> AT+CMGF=0
2011-05-03 16:10:34.180,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:34.483,7, GSM1: <- OK
2011-05-03 16:10:34.483,6, GSM1: Checking memory size
2011-05-03 16:10:34.685,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:34.695,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:34.998,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:34.998,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:34.998,6, GSM1: Changing memory
2011-05-03 16:10:35.200,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:35.214,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:35.517,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:35.517,6, GSM1: Checking memory size
2011-05-03 16:10:35.719,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:35.729,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:36.032,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:36.032,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:36.032,6, GSM1: Changing memory
2011-05-03 16:10:36.234,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:36.248,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:36.551,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:36.551,6, GSM1: No SMS received
2011-05-03 16:10:37.529,5, smsd: Moved file /var/spool/sms/outgoing/320811304427727 to /var/spool/sms/checked
2011-05-03 16:10:37.661,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/320811304427727
2011-05-03 16:10:37.661,6, GSM1: Checking device for incoming SMS
2011-05-03 16:10:37.661,6, GSM1: Checking if modem is ready
2011-05-03 16:10:37.862,7, GSM1: -> AT
2011-05-03 16:10:37.866,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:38.169,7, GSM1: <- OK
2011-05-03 16:10:38.169,6, GSM1: Pre-initializing modem
2011-05-03 16:10:38.371,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-03 16:10:38.392,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:38.695,7, GSM1: <- OK
2011-05-03 16:10:38.695,6, GSM1: Checking if modem needs PIN
2011-05-03 16:10:38.897,7, GSM1: -> AT+CPIN?
2011-05-03 16:10:38.907,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:39.210,7, GSM1: <- +CPIN: READY OK
2011-05-03 16:10:39.210,6, GSM1: Initializing modem
2011-05-03 16:10:39.412,7, GSM1: -> AT+CPMS="SM","SM","SM"
2011-05-03 16:10:39.437,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:39.740,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:39.942,7, GSM1: -> AT+CSQ
2011-05-03 16:10:39.950,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:40.274,7, GSM1: <- +CSQ: 23,0 OK
2011-05-03 16:10:40.274,6, GSM1: Signal Strength Indicator: (23,0) -67 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:10:40.274,6, GSM1: Checking if Modem is registered to the network
2011-05-03 16:10:40.476,7, GSM1: -> AT+CREG?
2011-05-03 16:10:40.486,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:40.798,7, GSM1: <- +CREG: 2,1,"2EE1","0CC3" OK
2011-05-03 16:10:40.798,6, GSM1: Modem is registered to the network
2011-05-03 16:10:40.798,6, GSM1: Selecting PDU mode
2011-05-03 16:10:41.001,7, GSM1: -> AT+CMGF=0
2011-05-03 16:10:41.013,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:41.315,7, GSM1: <- OK
2011-05-03 16:10:41.315,6, GSM1: Checking memory size
2011-05-03 16:10:41.517,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:41.527,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:41.830,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:41.830,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:41.830,6, GSM1: No SMS received
2011-05-03 16:10:41.830,6, GSM1: Sending SMS from to 4745887479
2011-05-03 16:10:41.830,6, GSM1: Checking if modem is ready
2011-05-03 16:10:42.034,7, GSM1: -> AT
2011-05-03 16:10:42.038,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:42.344,7, GSM1: <- OK
2011-05-03 16:10:42.344,6, GSM1: Pre-initializing modem
2011-05-03 16:10:42.547,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-03 16:10:42.569,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:42.875,7, GSM1: <- OK
2011-05-03 16:10:42.875,6, GSM1: Checking if modem needs PIN
2011-05-03 16:10:43.078,7, GSM1: -> AT+CPIN?
2011-05-03 16:10:43.089,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:43.391,7, GSM1: <- +CPIN: READY OK
2011-05-03 16:10:43.391,6, GSM1: Initializing modem
2011-05-03 16:10:43.595,7, GSM1: -> AT+CPMS="SM","SM","SM"
2011-05-03 16:10:43.619,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:43.925,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:44.128,7, GSM1: -> AT+CSQ
2011-05-03 16:10:44.136,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:44.440,7, GSM1: <- +CSQ: 23,0 OK
2011-05-03 16:10:44.440,6, GSM1: Signal Strength Indicator: (23,0) -67 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:10:44.440,6, GSM1: Checking if Modem is registered to the network
2011-05-03 16:10:44.644,7, GSM1: -> AT+CREG?
2011-05-03 16:10:44.654,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:44.959,7, GSM1: <- +CREG: 2,1,"2EE1","0CC3" OK
2011-05-03 16:10:44.959,6, GSM1: Modem is registered to the network
2011-05-03 16:10:44.959,6, GSM1: Selecting PDU mode
2011-05-03 16:10:45.163,7, GSM1: -> AT+CMGF=0
2011-05-03 16:10:45.175,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:45.480,7, GSM1: <- OK
2011-05-03 16:10:45.684,7, GSM1: -> AT+CMGS=20
2011-05-03 16:10:45.696,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:46.002,7, GSM1: <- >
2011-05-03 16:10:46.205,7, GSM1: -> 0031000A9174548847970000FF080A6A794E078D64.
2011-05-03 16:10:46.255,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:49.389,7, GSM1: <- +CMGS: 7 OK
2011-05-03 16:10:49.389,5, GSM1: SMS sent, Message_id: 7, To: 4745887479, sending time 8 sec.
2011-05-03 16:10:50.366,6, GSM1: Moved file /var/spool/sms/checked/320811304427727 to /var/spool/sms/sent/320811304427727
2011-05-03 16:10:50.366,6, GSM1: Checking device for incoming SMS
2011-05-03 16:10:50.366,6, GSM1: Checking memory size
2011-05-03 16:10:50.567,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:50.577,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:50.880,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:50.880,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:50.880,6, GSM1: Changing memory
2011-05-03 16:10:51.082,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:51.096,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:51.399,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:51.399,6, GSM1: Checking memory size
2011-05-03 16:10:51.600,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:51.610,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:51.913,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:51.913,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:51.913,6, GSM1: Changing memory
2011-05-03 16:10:52.115,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:52.129,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:52.432,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:52.432,6, GSM1: No SMS received
2011-05-03 16:10:52.432,6, GSM1: Checking device for incoming SMS
2011-05-03 16:10:52.432,6, GSM1: Checking memory size
2011-05-03 16:10:52.634,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:52.644,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:52.949,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:52.949,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:52.949,6, GSM1: Changing memory
2011-05-03 16:10:53.153,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:53.168,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:53.474,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:53.474,6, GSM1: Checking memory size
2011-05-03 16:10:53.678,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:53.689,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:53.994,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:53.994,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:53.994,6, GSM1: Changing memory
2011-05-03 16:10:54.198,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:54.213,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:54.519,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:54.519,6, GSM1: No SMS received
2011-05-03 16:11:04.539,6, GSM1: Checking device for incoming SMS
2011-05-03 16:11:04.539,6, GSM1: Checking if modem is ready
2011-05-03 16:11:04.743,7, GSM1: -> AT
2011-05-03 16:11:04.747,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:05.053,7, GSM1: <- OK
2011-05-03 16:11:05.053,6, GSM1: Pre-initializing modem
2011-05-03 16:11:05.257,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-03 16:11:05.279,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:05.584,7, GSM1: <- OK
2011-05-03 16:11:05.585,6, GSM1: Checking if modem needs PIN
2011-05-03 16:11:05.788,7, GSM1: -> AT+CPIN?
2011-05-03 16:11:05.798,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:06.104,7, GSM1: <- +CPIN: READY OK
2011-05-03 16:11:06.105,6, GSM1: Initializing modem
2011-05-03 16:11:06.308,7, GSM1: -> AT+CPMS="SM","SM","SM"
2011-05-03 16:11:06.332,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:06.638,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:11:06.842,7, GSM1: -> AT+CSQ
2011-05-03 16:11:06.850,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:07.156,7, GSM1: <- +CSQ: 24,0 OK
2011-05-03 16:11:07.156,6, GSM1: Signal Strength Indicator: (24,0) -65 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:11:07.156,6, GSM1: Checking if Modem is registered to the network
2011-05-03 16:11:07.360,7, GSM1: -> AT+CREG?
2011-05-03 16:11:07.370,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:07.677,7, GSM1: <- +CREG: 2,1,"2EE1","0CC3" OK
2011-05-03 16:11:07.677,6, GSM1: Modem is registered to the network
2011-05-03 16:11:07.677,6, GSM1: Selecting PDU mode
2011-05-03 16:11:07.880,7, GSM1: -> AT+CMGF=0
2011-05-03 16:11:07.892,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:08.198,7, GSM1: <- OK
2011-05-03 16:11:08.198,6, GSM1: Checking memory size
2011-05-03 16:11:08.402,7, GSM1: -> AT+CPMS?
2011-05-03 16:11:08.412,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:08.718,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:11:08.718,6, GSM1: Used memory is 0 of 25
2011-05-03 16:11:08.718,6, GSM1: Changing memory
2011-05-03 16:11:08.922,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:11:08.936,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:09.240,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:11:09.240,6, GSM1: Checking memory size
2011-05-03 16:11:09.442,7, GSM1: -> AT+CPMS?
2011-05-03 16:11:09.452,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:09.755,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:11:09.755,6, GSM1: Used memory is 0 of 25
2011-05-03 16:11:09.755,6, GSM1: Changing memory
2011-05-03 16:11:09.957,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:11:09.971,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:10.274,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:11:10.274,6, GSM1: No SMS received
2011-05-03 16:11:20.286,6, GSM1: Checking device for incoming SMS
2011-05-03 16:11:20.286,6, GSM1: Checking if modem is ready
2011-05-03 16:11:20.490,7, GSM1: -> AT
2011-05-03 16:11:20.494,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:20.797,7, GSM1: <- OK
2011-05-03 16:11:20.797,6, GSM1: Pre-initializing modem
2011-05-03 16:11:20.999,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-03 16:11:21.020,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:21.323,7, GSM1: <- OK
2011-05-03 16:11:21.323,6, GSM1: Checking if modem needs PIN
2011-05-03 16:11:21.525,7, GSM1: -> AT+CPIN?
2011-05-03 16:11:21.535,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:21.838,7, GSM1: <- +CPIN: READY OK
2011-05-03 16:11:21.838,6, GSM1: Initializing modem
2011-05-03 16:11:22.040,7, GSM1: -> AT+CPMS="SM","SM","SM"
2011-05-03 16:11:22.065,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:22.368,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:11:22.572,7, GSM1: -> AT+CSQ
2011-05-03 16:11:22.581,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:22.886,7, GSM1: <- +CSQ: 24,0 OK
2011-05-03 16:11:22.886,6, GSM1: Signal Strength Indicator: (24,0) -65 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:11:22.886,6, GSM1: Checking if Modem is registered to the network
2011-05-03 16:11:23.090,7, GSM1: -> AT+CREG?
2011-05-03 16:11:23.101,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:23.407,7, GSM1: <- +CREG: 2,1,"2EE1","0CC3" OK
2011-05-03 16:11:23.407,6, GSM1: Modem is registered to the network
2011-05-03 16:11:23.407,6, GSM1: Selecting PDU mode
2011-05-03 16:11:23.611,7, GSM1: -> AT+CMGF=0
2011-05-03 16:11:23.622,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:23.928,7, GSM1: <- OK
2011-05-03 16:11:23.928,6, GSM1: Checking memory size
2011-05-03 16:11:24.132,7, GSM1: -> AT+CPMS?
2011-05-03 16:11:24.142,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:24.447,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:11:24.447,6, GSM1: Used memory is 0 of 25
2011-05-03 16:11:24.447,6, GSM1: Changing memory
2011-05-03 16:11:24.651,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:11:24.665,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:24.971,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:11:24.971,6, GSM1: Checking memory size
2011-05-03 16:11:25.175,7, GSM1: -> AT+CPMS?
2011-05-03 16:11:25.185,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:25.491,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:11:25.491,6, GSM1: Used memory is 0 of 25
2011-05-03 16:11:25.491,6, GSM1: Changing memory
2011-05-03 16:11:25.694,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:11:25.708,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:26.014,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:11:26.014,6, GSM1: No SMS received
2011-05-03 16:11:26.523,2, smsd: Smsd mainprocess is awaiting the termination of all modem handlers. PID: 9279.
2011-05-03 16:11:26.523,2, GSM1: Modem handler 0 terminated. PID: 9280, was started 11-05-03 16:10:06.
2011-05-03 16:11:26.523,2, smsd: Smsd mainprocess terminated. PID 9279, was started 11-05-03 16:10:06.
2011-05-03 16:10:06.578,2, smsd: Running as root:root.
2011-05-03 16:10:06.578,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.VwkWcv /tmp/smsd_data.inpZCx
2011-05-03 16:10:06.583,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2011-05-03 16:10:06.583,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2011-05-03 16:10:06.583,4, smsd: Mainspooler uses GSM1 to send administrative messages.
2011-05-03 16:10:06.583,6, smsd: Using logtime format "%Y-%m-%d %H:%M:%S.timems". It produces "2011-05-03 16:10:06.583".
2011-05-03 16:10:06.583,5, GSM1: Modem handler 0 has started. PID: 9280.
2011-05-03 16:10:06.584,5, GSM1: Using check_memory_method 1: CPMS is used.
2011-05-03 16:10:06.584,6, GSM1: Checking device for incoming SMS
2011-05-03 16:10:06.584,6, GSM1: Checking if modem is ready
2011-05-03 16:10:06.584,5, smsd: Outgoing file checker has started. PID: 9279.
2011-05-03 16:10:06.584,7, smsd: All PID's: 9279,9280
2011-05-03 16:10:06.785,7, GSM1: -> AT
2011-05-03 16:10:06.789,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:07.092,7, GSM1: <- OK
2011-05-03 16:10:07.092,6, GSM1: Pre-initializing modem
2011-05-03 16:10:07.294,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-03 16:10:07.315,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:07.618,7, GSM1: <- OK
2011-05-03 16:10:07.618,6, GSM1: Checking if modem needs PIN
2011-05-03 16:10:07.820,7, GSM1: -> AT+CPIN?
2011-05-03 16:10:07.830,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:08.133,7, GSM1: <- +CPIN: READY OK
2011-05-03 16:10:08.133,6, GSM1: Initializing modem
2011-05-03 16:10:08.340,7, GSM1: -> AT+CPMS="SM","SM","SM"
2011-05-03 16:10:08.365,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:08.685,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:08.917,7, GSM1: -> AT+CSQ
2011-05-03 16:10:08.925,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:09.228,7, GSM1: <- +CSQ: 23,0 OK
2011-05-03 16:10:09.228,6, GSM1: Signal Strength Indicator: (23,0) -67 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:10:09.228,6, GSM1: Checking if Modem is registered to the network
2011-05-03 16:10:09.429,7, GSM1: -> AT+CREG?
2011-05-03 16:10:09.439,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:09.742,7, GSM1: <- +CREG: 2,1,"2EE1","0CC3" OK
2011-05-03 16:10:09.742,6, GSM1: Modem is registered to the network
2011-05-03 16:10:09.742,6, GSM1: Location area code: 2EE1, Cell ID: 0CC3
2011-05-03 16:10:09.944,7, GSM1: -> AT+CSQ
2011-05-03 16:10:09.952,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:10.255,7, GSM1: <- +CSQ: 23,0 OK
2011-05-03 16:10:10.255,6, GSM1: Signal Strength Indicator: (23,0) -67 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:10:10.255,6, GSM1: Selecting PDU mode
2011-05-03 16:10:10.457,7, GSM1: -> AT+CMGF=0
2011-05-03 16:10:10.469,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:10.772,7, GSM1: <- OK
2011-05-03 16:10:10.974,7, GSM1: -> AT+CIMI
2011-05-03 16:10:10.984,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:11.287,7, GSM1: <- 242010410807638 OK
2011-05-03 16:10:11.489,7, GSM1: -> AT+CGSN
2011-05-03 16:10:11.499,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:11.802,7, GSM1: <- 354777032462835 OK
2011-05-03 16:10:11.802,5, GSM1: CGSN: 354777032462835
2011-05-03 16:10:11.802,5, GSM1: IMSI: 242010410807638
2011-05-03 16:10:11.802,6, GSM1: Checking if reading of messages is supported
2011-05-03 16:10:12.004,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:12.014,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:12.317,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:12.317,7, GSM1: ## Start of device details
2011-05-03 16:10:12.317,7, GSM1: # Manufacturer identification:
2011-05-03 16:10:12.519,7, GSM1: -> AT+CGMI
2011-05-03 16:10:12.835,7, GSM1: <- SIMCOM_Ltd
OK
2011-05-03 16:10:12.835,7, GSM1: # Model identification:
2011-05-03 16:10:13.039,7, GSM1: -> AT+CGMM
2011-05-03 16:10:13.361,7, GSM1: <- SIMCOM_SIM300
OK
2011-05-03 16:10:13.361,7, GSM1: # Revision identification:
2011-05-03 16:10:13.587,7, GSM1: -> AT+CGMR
2011-05-03 16:10:13.901,7, GSM1: <- Revision:1008B15SIM300M32_SST34HF3284
OK
2011-05-03 16:10:13.901,7, GSM1: # New message indications, list of supported modes:
2011-05-03 16:10:14.102,7, GSM1: -> AT+CNMI=?
2011-05-03 16:10:14.414,7, GSM1: <- +CNMI: (0-3),(0-3),(0,2),(0-1),(0)
OK
2011-05-03 16:10:14.414,7, GSM1: # New message indications, current settings:
2011-05-03 16:10:14.616,7, GSM1: -> AT+CNMI?
2011-05-03 16:10:14.929,7, GSM1: <- +CNMI: 2,1,0,0,0
OK
2011-05-03 16:10:14.929,7, GSM1: # Preferred message storage, list of supported mem's:
2011-05-03 16:10:15.131,7, GSM1: -> AT+CPMS=?
2011-05-03 16:10:15.446,7, GSM1: <- +CPMS: ("SM"),("SM"),("SM")
OK
2011-05-03 16:10:15.446,7, GSM1: # Phonebook storage, available mem's:
2011-05-03 16:10:15.648,7, GSM1: -> AT+CPBS=?
2011-05-03 16:10:16.064,7, GSM1: <- +CPBS: ("MC","RC","DC","LD","LA","ME","SM","FD","ON","BN","SD","VM")
OK
2011-05-03 16:10:16.064,7, GSM1: # List messages, list of supported stat's:
2011-05-03 16:10:16.266,7, GSM1: -> AT+CMGL=?
2011-05-03 16:10:16.581,7, GSM1: <- +CMGL: (0-4)
OK
2011-05-03 16:10:16.581,7, GSM1: # Delete message, list of supported values:
2011-05-03 16:10:16.783,7, GSM1: -> AT+CMGD=?
2011-05-03 16:10:17.098,7, GSM1: <- +CMGD: (1-25)
OK
2011-05-03 16:10:17.098,7, GSM1: # Phone activity status, list of supported stat's:
2011-05-03 16:10:17.300,7, GSM1: -> AT+CPAS=?
2011-05-03 16:10:17.616,7, GSM1: <- +CPAS: (0,2,3,4)
OK
2011-05-03 16:10:17.616,7, GSM1: # TE character set, list of supported charset's:
2011-05-03 16:10:17.819,7, GSM1: -> AT+CSCS=?
2011-05-03 16:10:18.239,7, GSM1: <- +CSCS: ("GSM","HEX","IRA","PCCP","PCDN","UCS2","8859-1")
OK
2011-05-03 16:10:18.239,7, GSM1: # TE character set, current setting:
2011-05-03 16:10:18.443,7, GSM1: -> AT+CSCS?
2011-05-03 16:10:18.757,7, GSM1: <- +CSCS: "IRA"
OK
2011-05-03 16:10:18.757,7, GSM1: ## End of device details
2011-05-03 16:10:18.757,6, GSM1: Checking memory size
2011-05-03 16:10:18.961,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:18.972,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:19.277,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:19.277,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:19.277,6, GSM1: Changing memory
2011-05-03 16:10:19.480,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:19.495,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:19.801,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:19.801,6, GSM1: Checking memory size
2011-05-03 16:10:20.005,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:20.015,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:20.319,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:20.319,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:20.319,6, GSM1: Changing memory
2011-05-03 16:10:20.522,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:20.537,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:20.841,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:20.841,6, GSM1: No SMS received
2011-05-03 16:10:30.857,6, GSM1: Checking device for incoming SMS
2011-05-03 16:10:30.857,6, GSM1: Checking if modem is ready
2011-05-03 16:10:31.059,7, GSM1: -> AT
2011-05-03 16:10:31.063,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:31.366,7, GSM1: <- OK
2011-05-03 16:10:31.366,6, GSM1: Pre-initializing modem
2011-05-03 16:10:31.568,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-03 16:10:31.590,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:31.893,7, GSM1: <- OK
2011-05-03 16:10:31.893,6, GSM1: Checking if modem needs PIN
2011-05-03 16:10:32.095,7, GSM1: -> AT+CPIN?
2011-05-03 16:10:32.105,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:32.408,7, GSM1: <- +CPIN: READY OK
2011-05-03 16:10:32.408,6, GSM1: Initializing modem
2011-05-03 16:10:32.610,7, GSM1: -> AT+CPMS="SM","SM","SM"
2011-05-03 16:10:32.634,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:32.937,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:33.139,7, GSM1: -> AT+CSQ
2011-05-03 16:10:33.148,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:33.451,7, GSM1: <- +CSQ: 23,0 OK
2011-05-03 16:10:33.451,6, GSM1: Signal Strength Indicator: (23,0) -67 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:10:33.451,6, GSM1: Checking if Modem is registered to the network
2011-05-03 16:10:33.653,7, GSM1: -> AT+CREG?
2011-05-03 16:10:33.663,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:33.966,7, GSM1: <- +CREG: 2,1,"2EE1","0CC3" OK
2011-05-03 16:10:33.966,6, GSM1: Modem is registered to the network
2011-05-03 16:10:33.966,6, GSM1: Selecting PDU mode
2011-05-03 16:10:34.168,7, GSM1: -> AT+CMGF=0
2011-05-03 16:10:34.180,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:34.483,7, GSM1: <- OK
2011-05-03 16:10:34.483,6, GSM1: Checking memory size
2011-05-03 16:10:34.685,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:34.695,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:34.998,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:34.998,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:34.998,6, GSM1: Changing memory
2011-05-03 16:10:35.200,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:35.214,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:35.517,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:35.517,6, GSM1: Checking memory size
2011-05-03 16:10:35.719,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:35.729,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:36.032,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:36.032,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:36.032,6, GSM1: Changing memory
2011-05-03 16:10:36.234,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:36.248,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:36.551,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:36.551,6, GSM1: No SMS received
2011-05-03 16:10:37.529,5, smsd: Moved file /var/spool/sms/outgoing/320811304427727 to /var/spool/sms/checked
2011-05-03 16:10:37.661,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/320811304427727
2011-05-03 16:10:37.661,6, GSM1: Checking device for incoming SMS
2011-05-03 16:10:37.661,6, GSM1: Checking if modem is ready
2011-05-03 16:10:37.862,7, GSM1: -> AT
2011-05-03 16:10:37.866,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:38.169,7, GSM1: <- OK
2011-05-03 16:10:38.169,6, GSM1: Pre-initializing modem
2011-05-03 16:10:38.371,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-03 16:10:38.392,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:38.695,7, GSM1: <- OK
2011-05-03 16:10:38.695,6, GSM1: Checking if modem needs PIN
2011-05-03 16:10:38.897,7, GSM1: -> AT+CPIN?
2011-05-03 16:10:38.907,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:39.210,7, GSM1: <- +CPIN: READY OK
2011-05-03 16:10:39.210,6, GSM1: Initializing modem
2011-05-03 16:10:39.412,7, GSM1: -> AT+CPMS="SM","SM","SM"
2011-05-03 16:10:39.437,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:39.740,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:39.942,7, GSM1: -> AT+CSQ
2011-05-03 16:10:39.950,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:40.274,7, GSM1: <- +CSQ: 23,0 OK
2011-05-03 16:10:40.274,6, GSM1: Signal Strength Indicator: (23,0) -67 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:10:40.274,6, GSM1: Checking if Modem is registered to the network
2011-05-03 16:10:40.476,7, GSM1: -> AT+CREG?
2011-05-03 16:10:40.486,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:40.798,7, GSM1: <- +CREG: 2,1,"2EE1","0CC3" OK
2011-05-03 16:10:40.798,6, GSM1: Modem is registered to the network
2011-05-03 16:10:40.798,6, GSM1: Selecting PDU mode
2011-05-03 16:10:41.001,7, GSM1: -> AT+CMGF=0
2011-05-03 16:10:41.013,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:41.315,7, GSM1: <- OK
2011-05-03 16:10:41.315,6, GSM1: Checking memory size
2011-05-03 16:10:41.517,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:41.527,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:41.830,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:41.830,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:41.830,6, GSM1: No SMS received
2011-05-03 16:10:41.830,6, GSM1: Sending SMS from to 4745887479
2011-05-03 16:10:41.830,6, GSM1: Checking if modem is ready
2011-05-03 16:10:42.034,7, GSM1: -> AT
2011-05-03 16:10:42.038,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:42.344,7, GSM1: <- OK
2011-05-03 16:10:42.344,6, GSM1: Pre-initializing modem
2011-05-03 16:10:42.547,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-03 16:10:42.569,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:42.875,7, GSM1: <- OK
2011-05-03 16:10:42.875,6, GSM1: Checking if modem needs PIN
2011-05-03 16:10:43.078,7, GSM1: -> AT+CPIN?
2011-05-03 16:10:43.089,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:43.391,7, GSM1: <- +CPIN: READY OK
2011-05-03 16:10:43.391,6, GSM1: Initializing modem
2011-05-03 16:10:43.595,7, GSM1: -> AT+CPMS="SM","SM","SM"
2011-05-03 16:10:43.619,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:43.925,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:44.128,7, GSM1: -> AT+CSQ
2011-05-03 16:10:44.136,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:44.440,7, GSM1: <- +CSQ: 23,0 OK
2011-05-03 16:10:44.440,6, GSM1: Signal Strength Indicator: (23,0) -67 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:10:44.440,6, GSM1: Checking if Modem is registered to the network
2011-05-03 16:10:44.644,7, GSM1: -> AT+CREG?
2011-05-03 16:10:44.654,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:44.959,7, GSM1: <- +CREG: 2,1,"2EE1","0CC3" OK
2011-05-03 16:10:44.959,6, GSM1: Modem is registered to the network
2011-05-03 16:10:44.959,6, GSM1: Selecting PDU mode
2011-05-03 16:10:45.163,7, GSM1: -> AT+CMGF=0
2011-05-03 16:10:45.175,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:45.480,7, GSM1: <- OK
2011-05-03 16:10:45.684,7, GSM1: -> AT+CMGS=20
2011-05-03 16:10:45.696,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:46.002,7, GSM1: <- >
2011-05-03 16:10:46.205,7, GSM1: -> 0031000A9174548847970000FF080A6A794E078D64.
2011-05-03 16:10:46.255,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:49.389,7, GSM1: <- +CMGS: 7 OK
2011-05-03 16:10:49.389,5, GSM1: SMS sent, Message_id: 7, To: 4745887479, sending time 8 sec.
2011-05-03 16:10:50.366,6, GSM1: Moved file /var/spool/sms/checked/320811304427727 to /var/spool/sms/sent/320811304427727
2011-05-03 16:10:50.366,6, GSM1: Checking device for incoming SMS
2011-05-03 16:10:50.366,6, GSM1: Checking memory size
2011-05-03 16:10:50.567,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:50.577,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:50.880,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:50.880,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:50.880,6, GSM1: Changing memory
2011-05-03 16:10:51.082,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:51.096,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:51.399,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:51.399,6, GSM1: Checking memory size
2011-05-03 16:10:51.600,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:51.610,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:51.913,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:51.913,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:51.913,6, GSM1: Changing memory
2011-05-03 16:10:52.115,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:52.129,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:52.432,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:52.432,6, GSM1: No SMS received
2011-05-03 16:10:52.432,6, GSM1: Checking device for incoming SMS
2011-05-03 16:10:52.432,6, GSM1: Checking memory size
2011-05-03 16:10:52.634,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:52.644,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:52.949,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:52.949,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:52.949,6, GSM1: Changing memory
2011-05-03 16:10:53.153,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:53.168,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:53.474,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:53.474,6, GSM1: Checking memory size
2011-05-03 16:10:53.678,7, GSM1: -> AT+CPMS?
2011-05-03 16:10:53.689,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:53.994,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:10:53.994,6, GSM1: Used memory is 0 of 25
2011-05-03 16:10:53.994,6, GSM1: Changing memory
2011-05-03 16:10:54.198,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:10:54.213,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:10:54.519,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:10:54.519,6, GSM1: No SMS received
2011-05-03 16:11:04.539,6, GSM1: Checking device for incoming SMS
2011-05-03 16:11:04.539,6, GSM1: Checking if modem is ready
2011-05-03 16:11:04.743,7, GSM1: -> AT
2011-05-03 16:11:04.747,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:05.053,7, GSM1: <- OK
2011-05-03 16:11:05.053,6, GSM1: Pre-initializing modem
2011-05-03 16:11:05.257,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-03 16:11:05.279,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:05.584,7, GSM1: <- OK
2011-05-03 16:11:05.585,6, GSM1: Checking if modem needs PIN
2011-05-03 16:11:05.788,7, GSM1: -> AT+CPIN?
2011-05-03 16:11:05.798,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:06.104,7, GSM1: <- +CPIN: READY OK
2011-05-03 16:11:06.105,6, GSM1: Initializing modem
2011-05-03 16:11:06.308,7, GSM1: -> AT+CPMS="SM","SM","SM"
2011-05-03 16:11:06.332,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:06.638,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:11:06.842,7, GSM1: -> AT+CSQ
2011-05-03 16:11:06.850,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:07.156,7, GSM1: <- +CSQ: 24,0 OK
2011-05-03 16:11:07.156,6, GSM1: Signal Strength Indicator: (24,0) -65 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:11:07.156,6, GSM1: Checking if Modem is registered to the network
2011-05-03 16:11:07.360,7, GSM1: -> AT+CREG?
2011-05-03 16:11:07.370,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:07.677,7, GSM1: <- +CREG: 2,1,"2EE1","0CC3" OK
2011-05-03 16:11:07.677,6, GSM1: Modem is registered to the network
2011-05-03 16:11:07.677,6, GSM1: Selecting PDU mode
2011-05-03 16:11:07.880,7, GSM1: -> AT+CMGF=0
2011-05-03 16:11:07.892,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:08.198,7, GSM1: <- OK
2011-05-03 16:11:08.198,6, GSM1: Checking memory size
2011-05-03 16:11:08.402,7, GSM1: -> AT+CPMS?
2011-05-03 16:11:08.412,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:08.718,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:11:08.718,6, GSM1: Used memory is 0 of 25
2011-05-03 16:11:08.718,6, GSM1: Changing memory
2011-05-03 16:11:08.922,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:11:08.936,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:09.240,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:11:09.240,6, GSM1: Checking memory size
2011-05-03 16:11:09.442,7, GSM1: -> AT+CPMS?
2011-05-03 16:11:09.452,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:09.755,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:11:09.755,6, GSM1: Used memory is 0 of 25
2011-05-03 16:11:09.755,6, GSM1: Changing memory
2011-05-03 16:11:09.957,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:11:09.971,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:10.274,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:11:10.274,6, GSM1: No SMS received
2011-05-03 16:11:20.286,6, GSM1: Checking device for incoming SMS
2011-05-03 16:11:20.286,6, GSM1: Checking if modem is ready
2011-05-03 16:11:20.490,7, GSM1: -> AT
2011-05-03 16:11:20.494,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:20.797,7, GSM1: <- OK
2011-05-03 16:11:20.797,6, GSM1: Pre-initializing modem
2011-05-03 16:11:20.999,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2011-05-03 16:11:21.020,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:21.323,7, GSM1: <- OK
2011-05-03 16:11:21.323,6, GSM1: Checking if modem needs PIN
2011-05-03 16:11:21.525,7, GSM1: -> AT+CPIN?
2011-05-03 16:11:21.535,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:21.838,7, GSM1: <- +CPIN: READY OK
2011-05-03 16:11:21.838,6, GSM1: Initializing modem
2011-05-03 16:11:22.040,7, GSM1: -> AT+CPMS="SM","SM","SM"
2011-05-03 16:11:22.065,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:22.368,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:11:22.572,7, GSM1: -> AT+CSQ
2011-05-03 16:11:22.581,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:22.886,7, GSM1: <- +CSQ: 24,0 OK
2011-05-03 16:11:22.886,6, GSM1: Signal Strength Indicator: (24,0) -65 dBm (Excellent), Bit Error Rate: less than 0.2 %
2011-05-03 16:11:22.886,6, GSM1: Checking if Modem is registered to the network
2011-05-03 16:11:23.090,7, GSM1: -> AT+CREG?
2011-05-03 16:11:23.101,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:23.407,7, GSM1: <- +CREG: 2,1,"2EE1","0CC3" OK
2011-05-03 16:11:23.407,6, GSM1: Modem is registered to the network
2011-05-03 16:11:23.407,6, GSM1: Selecting PDU mode
2011-05-03 16:11:23.611,7, GSM1: -> AT+CMGF=0
2011-05-03 16:11:23.622,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:23.928,7, GSM1: <- OK
2011-05-03 16:11:23.928,6, GSM1: Checking memory size
2011-05-03 16:11:24.132,7, GSM1: -> AT+CPMS?
2011-05-03 16:11:24.142,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:24.447,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:11:24.447,6, GSM1: Used memory is 0 of 25
2011-05-03 16:11:24.447,6, GSM1: Changing memory
2011-05-03 16:11:24.651,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:11:24.665,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:24.971,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:11:24.971,6, GSM1: Checking memory size
2011-05-03 16:11:25.175,7, GSM1: -> AT+CPMS?
2011-05-03 16:11:25.185,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:25.491,7, GSM1: <- +CPMS: "SM",0,25,"SM",0,25,"SM",0,25 OK
2011-05-03 16:11:25.491,6, GSM1: Used memory is 0 of 25
2011-05-03 16:11:25.491,6, GSM1: Changing memory
2011-05-03 16:11:25.694,7, GSM1: -> AT+CPMS="SM"
2011-05-03 16:11:25.708,7, GSM1: Command is sent, waiting for the answer
2011-05-03 16:11:26.014,7, GSM1: <- +CPMS: 0,25,0,25,0,25 OK
2011-05-03 16:11:26.014,6, GSM1: No SMS received
2011-05-03 16:11:26.523,2, smsd: Smsd mainprocess is awaiting the termination of all modem handlers. PID: 9279.
2011-05-03 16:11:26.523,2, GSM1: Modem handler 0 terminated. PID: 9280, was started 11-05-03 16:10:06.
2011-05-03 16:11:26.523,2, smsd: Smsd mainprocess terminated. PID 9279, was started 11-05-03 16:10:06.
« Last edit by keke on Tue May 03, 2011 16:46, 165 months ago. »