|
|
SMS Server Tools 3 Community |
Welcome, Guest. The forum is currently read-only, but will open soon. |
Thu Nov 21, 2024 22:51 |
This topic is locked
Page: 1
Author |
Post |
|
#1 Sat May 21, 2011 08:13, 164 months ago.
|
Member
Registered: Jun 2010
Location: Singapore
|
Operating system name and version: Windows Server 2003 (64 bit) CYGWIN Version of smsd: 3.1.4 Smsd installed from: sources Name and model of a modem / phone: Technical Specification: Wavecom Chipset Q24Plus SIM holder integrated 3V SIM Interface Activity Status Indication Power Output: Class4(2W @ EGSM 900/GSM 850); Class1 (1W @ GSM 1800/1900) Normal operation temperature: -20 to 55ºC Operating Voltage : 5 to 24VDC Typical idle mode supply current: 5mA Baud rates: 300-115200 bits/s (Downgradable to GSM 9600, or maintain at GPRS 115200) Compliant with ETSI GSM Phase 2 + Control via AT commands (GSM07.07 & 07.05) Interface: USB (Prolific USB to Serial Adapter) Hi KeKe, Alex again. I am wondering, if a sms modem could enter sleep mode for few days of working and smsd cannot check for modem's readiness. If it could go into sleep mode, is there any settings in smsd.config could protect from this? Thanks for your help in advanced. Best regards, Alex Kent For your reference, below is part of the smsd log:
|
|
#2 Sat May 21, 2011 10:23, 164 months ago.
|
Administrator
Registered: May 2009
Location: Jyväskylä, Finland
|
There is no sleep mode.
For some reason the modem process was killed at 2011-05-19 16:19:35, and I do not know the reason for that. Latest activity with a modem was about three hours before, and because your system is not receiving messages, modem process has been idle and just waiting for messages to be sent. Before a modem process got killed, there was no any errors with the modem, which means that some external process (or user) is killed it.
Is this happened more than once?
|
|
#3 Sat May 21, 2011 13:30, 164 months ago.
|
Member
Registered: Jun 2010
Location: Singapore
Topic owner
|
Hi Ke Ke,
Thanks for the prompt reply.
This happened for the first time. I will update you again, if it should happen again.
By the way, Is there any sample scripts to perform following function:
- Send email to specific person whenever the sms process/service is being stopped.
|
|
#4 Sat May 21, 2011 13:55, 164 months ago.
|
Administrator
Registered: May 2009
Location: Jyväskylä, Finland
|
alexanderfuture wrote By the way, Is there any sample scripts to perform following function:
- Send email to specific person whenever the sms process/service is being stopped.
As far as I remember, no complete samples are published here, but Nagios could do the job with check_procs plugin.
|
|
#5 Sat May 21, 2011 14:41, 164 months ago.
|
Member
Registered: Jun 2010
Location: Singapore
Topic owner
|
Thanks...
|
This topic is locked
Page: 1
Time in this board is UTC.
|
|
|
|
|
|
|