SMSTools3 Help and support

Hei Guy have an Ubuntu 10.04 with SMSTOOLS Server.
I plugged in my Surfstick (ZTE MFE 100) and changed to "Modem" mode like its described here what works fine ...
After that i tried to send an sms (sendsms) .
I setted up the Modem Device /dev/sg2
cause my hwinfo say that

45: SCSI 500.1: 10600 Disk
  [Created at block.254]
  Unique ID: uI_Q.eDlGeyNChiE
  Parent ID: f5xu.D4EZuGTknpB
  SysFS ID: /class/block/sdb
  SysFS BusID: 5:0:0:1
  SysFS Device Link: /devices/pci0000:00/0000:00:10.3/usb1/1-1/1-1:1.0/host5/target5:0:0/5:0:0:1
  Hardware Class: disk
  Model: "ZTE MMC Storage"
  Vendor: usb 0x19d2 "ZTE"
  Device: usb 0x2000 "MMC Storage"
  Revision: "2.31"
  Driver: "usb-storage", "sd"
  Driver Modules: "usb_storage"
  Device File: /dev/sdb (/dev/sg2)
  Device Files: /dev/sdb, /dev/disk/by-id/usb-ZTE_MMC_Storage_1234567890ABCDEF-0:1, /dev/disk/by-path/pci-0000:00:10.3-usb-0:1:1.0-scsi-0:0:0:1
  Device Number: block 8:16-8:31 (char 21:2)
  Geometry (Logical): CHS 1024/0/62
  Drive status: no medium
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (USB Controller)

[ Select ]

[ Expand ]

Should work but my SMS Server says no :

2011-12-30 11:06:35,2, smsd: Smsd v3.1.14 started.
2011-12-30 11:06:35,2, smsd: Running as root:root.
2011-12-30 11:06:35,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.e0dbzB /tmp/smsd_data.UsfuVY
2011-12-30 11:06:35,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2011-12-30 11:06:35,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2011-12-30 11:06:35,2, smsd: This is a test run: messages are kept and smsd will stop after reading.
2011-12-30 11:06:35,5, smsd: Outgoing file checker has started. PID: 24258.
2011-12-30 11:06:35,7, smsd: All PID's: 24258,24260
2011-12-30 11:06:35,5, GSM1: Modem handler 0 has started. PID: 24260. Will only send messages.
2011-12-30 11:06:35,3, GSM1: Couldn't open serial port /dev/usbmodem, error: No such file or directory, waiting 30 sec.
2011-12-30 11:07:05,3, GSM1: Cannot open serial port /dev/usbmodem, error: No such file or directory
2011-12-30 11:07:05,2, GSM1: Modem handler 0 terminated. PID: 24260, was started 11-12-30 11:06:35.
2011-12-30 11:07:36,2, smsd: Smsd mainprocess is awaiting the termination of all modem handlers. PID: 24258.
2011-12-30 11:07:36,2, smsd: Smsd mainprocess terminated. PID 24258, was started 11-12-30 11:06:35.
2011-12-30 11:16:42,2, smsd: Smsd v3.1.14 started.
2011-12-30 11:16:42,2, smsd: Running as root:root.
2011-12-30 11:16:42,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.IARDXQ /tmp/smsd_data.Q2jb8v
2011-12-30 11:16:42,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2011-12-30 11:16:42,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2011-12-30 11:16:42,2, smsd: This is a test run: messages are kept and smsd will stop after reading.
2011-12-30 11:16:42,5, smsd: Outgoing file checker has started. PID: 24507.
2011-12-30 11:16:42,7, smsd: All PID's: 24507,24509
2011-12-30 11:16:42,5, GSM1: Modem handler 0 has started. PID: 24509. Will only send messages.
2011-12-30 11:16:42,6, GSM1: Checking if modem is ready
2011-12-30 11:16:42,3, GSM1: Unexpected input: ER^B^?d^A^APM^B^A#MRKSApple_partition_map#3PM^Bt~ï¿½Toast 8.0.1 HFS+/Joliet BuilderApple_HFS~ï¿½3^ACD001^AAPPLE COMPUTER,2011-12-30 11:16:42,7, GSM1: -> AT
2011-12-30 11:16:42,7, GSM1: Command is sent, waiting for the answer
2011-12-30 11:16:42,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 1.
2011-12-30 11:16:42,7, GSM1: <- ï¿½ï¿½Æ»Õ»G^Pï¿½H^P^O^Oï¿½^O^P^F ^DÖ»^QInfoPlist.strings^FØ»^DÖ»^LMainMenu.nib^FÙ»^DÒ»^KEnglish.txt^FÚ»^DÒ» German.txt^FÛ»^DÒ»Hungarian.2011-12-30 11:16:42,3, GSM1: Unexpected input: ces ï¿½English.lproj^A^Bï¿½Æµbï¿½Æµbï¿½Æ»Õ»Ò»Æ»Õ»Ï»^A^Pï¿½^\ï¿½^KEnglish.txt^B^Bï¿½Æ»`ï¿½!Æ»`ï¿½!Æ»Õ»Ò»Æ»Õ»G^P"ï¿½^P^C^Oï2011-12-30 11:16:42,7, GSM1: -> ^Zï¿½!Æ»`ï¿½!Æ»$
2011-12-30 11:16:42,7, GSM1: Command is sent, waiting for the answer
2011-12-30 11:16:42,7, GSM1: put_command expected (OK)|(ERROR), timeout occurred. 2.
2011-12-30 11:16:42,7, GSM1: <- ï¿½ï¿½^[ï¿½@ï¿½Uï¿½ï¿½ï¿½M^Hï¿½ï¿½u^Eï¿½Iï¿½ï¿½E S3ï¿½Cï¿½ï¿½t^Oï¿½^Hï¿½M^Tï¿½H^Dï¿½ï¿½ï¿½ E^\ï¿½ï¿½Èï¿½^KV^Oï¿½Äï¿½$ï¿½gN@ï¿½U^Tï¿½ï¿½ï¿½U^Tï¿½ï¿½ï¿½u^Lï¿½U^Tï¿½ï¿½ï¿½u^LéE^Xï¿½ï¿½tï¿½ï¿½0ï¿½p^Dï¿½U^TéE^Xï¿½ï¿½tï¿½ï¿½0ï¿½p^Dï¿½U^Të

[ Select ]

[ Expand ]

and hangs up (had to kill SMS Deamon).
Then i tryed to define an UDEV Rule for an static device name :

#USB Stick erkennen und umschalten zum Modem
BUS=="usb", KERNEL=="sd?1", SYSFS{idVendor}=="19d2", SYMLINK+="usbmodem", RUN+="usb_modeswitch -v 19d2 -p 2000"

[ Select ]

But that doesnt work to.
Can anybody help me

???

Device Problems