Operating system name and version: openSUSE 11.4
Version of smsd: 3.1.15
Smsd installed from: Sources
Name and model of a modem / phone: Huawei E173
Interface: USB

Hi!

I'm trying smstools3 and it started working fine but after a while it just stoped.

Here is my config file:
devices = E173 logfile = /var/log/smsd.log loglevel = 7 [E173] device = /dev/ttyUSB0 incoming = no memory_start = 0

And here is the log:

2015-12-09 22:21:50,2, smsd: Smsd v3.1.15 started. 2015-12-09 22:21:50,2, smsd: Running as root:root. 2015-12-09 22:21:50,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.ZCgV5J /tmp/smsd_data.HT2qlf 2015-12-09 22:21:50,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0) 2015-12-09 22:21:50,4, smsd: File mode creation mask: 077 (0600, rw-------). 2015-12-09 22:21:50,5, smsd: Outgoing file checker has started. PID: 24704. 2015-12-09 22:21:50,7, smsd: All PID's: 24704,24705 2015-12-09 22:21:50,5, E173: Modem handler 0 has started. PID: 24705. Will only send messages. 2015-12-09 22:21:50,6, E173: Checking if modem is ready 2015-12-09 22:21:50,7, E173: -> AT 2015-12-09 22:21:50,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:50,7, E173: <- OK 2015-12-09 22:21:50,6, E173: Pre-initializing modem 2015-12-09 22:21:50,7, E173: -> ATE0+CMEE=1;+CREG=2 2015-12-09 22:21:50,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:51,7, E173: <- OK 2015-12-09 22:21:51,6, E173: Checking if modem needs PIN 2015-12-09 22:21:51,7, E173: -> AT+CPIN? 2015-12-09 22:21:51,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:51,7, E173: <- +CPIN: READY OK 2015-12-09 22:21:51,7, E173: -> AT+CSQ 2015-12-09 22:21:51,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:52,7, E173: <- +CSQ: 11,0 OK 2015-12-09 22:21:52,6, E173: Signal Strength Indicator: (11,0) -91 dBm (Workable), Bit Error Rate: less than 0.2 % 2015-12-09 22:21:52,6, E173: Checking if Modem is registered to the network 2015-12-09 22:21:52,7, E173: -> AT+CREG? 2015-12-09 22:21:52,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:52,7, E173: <- +CREG: 2,1,"755C","2B1E" OK 2015-12-09 22:21:52,6, E173: Modem is registered to the network 2015-12-09 22:21:52,6, E173: Location area code: 755C, Cell ID: 2B1E 2015-12-09 22:21:52,7, E173: -> AT+CSQ 2015-12-09 22:21:52,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:53,7, E173: <- +CSQ: 11,0 OK 2015-12-09 22:21:53,6, E173: Signal Strength Indicator: (11,0) -91 dBm (Workable), Bit Error Rate: less than 0.2 % 2015-12-09 22:21:53,6, E173: Selecting PDU mode 2015-12-09 22:21:53,7, E173: -> AT+CMGF=0 2015-12-09 22:21:53,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:53,7, E173: <- OK 2015-12-09 22:21:53,7, E173: -> AT+CIMI 2015-12-09 22:21:53,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:54,7, E173: <- 724054203997068 OK 2015-12-09 22:21:54,7, E173: -> AT+CGSN 2015-12-09 22:21:54,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:54,7, E173: <- 863133010845324 OK 2015-12-09 22:21:54,5, E173: CGSN: 863133010845324 2015-12-09 22:21:54,5, E173: IMSI: 724054203997068 2015-12-09 22:21:54,5, E173: Waiting for messages to send... 2015-12-09 22:21:54,6, E173: I have to send 1 short message for /var/spool/sms/checked/SMS_send_88aIj8 2015-12-09 22:21:54,6, E173: Sending SMS from me@domain.com to XXXXXXXXXX 2015-12-09 22:21:54,6, E173: Checking if modem is ready 2015-12-09 22:21:54,7, E173: -> AT 2015-12-09 22:21:54,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:55,7, E173: <- OK 2015-12-09 22:21:55,6, E173: Pre-initializing modem 2015-12-09 22:21:55,7, E173: -> ATE0+CMEE=1;+CREG=2 2015-12-09 22:21:55,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:55,7, E173: <- OK 2015-12-09 22:21:55,7, E173: -> AT+CSQ 2015-12-09 22:21:55,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:56,7, E173: <- +CSQ: 11,0 OK 2015-12-09 22:21:56,6, E173: Signal Strength Indicator: (11,0) -91 dBm (Workable), Bit Error Rate: less than 0.2 % 2015-12-09 22:21:56,6, E173: Checking if Modem is registered to the network 2015-12-09 22:21:56,7, E173: -> AT+CREG? 2015-12-09 22:21:56,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:56,7, E173: <- +CREG: 2,1,"755C","2B1E" OK 2015-12-09 22:21:56,6, E173: Modem is registered to the network 2015-12-09 22:21:56,6, E173: Selecting PDU mode 2015-12-09 22:21:56,7, E173: -> AT+CMGF=0 2015-12-09 22:21:56,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:57,7, E173: <- OK 2015-12-09 22:21:57,7, E173: -> AT+CMGS=82 2015-12-09 22:21:57,7, E173: Command is sent, waiting for the answer 2015-12-09 22:21:57,7, E173: <- > 2015-12-09 22:21:57,7, E173: -> <hidden data>^Z 2015-12-09 22:21:57,7, E173: Command is sent, waiting for the answer 2015-12-09 22:22:28,7, E173: <- +CMS ERROR: 500 (Unknown error) 2015-12-09 22:22:28,3, E173: The modem answer was not OK: +CMS ERROR: 500 (Unknown error) 2015-12-09 22:22:28,5, E173: Waiting 10 sec. before retrying

Thanks.