SMS Server Tools 3
This site is hosted by Kekekasvi.com
 Menu
Basic information:
Additional information:
Support:
Get SMS Server Tools 3:
Additional Options

 Sponsored links

 Search
Custom Search

 Visitor locations
 
 SMS Server Tools 3 Community
Welcome, Guest. Please login or register. Sat May 25, 2024 10:52
SMSTools3 Community » Help and support Bottom

[answered] bug phonecalls = yes

  This topic is locked

Page:  1

Author Post
Member
Registered:
Mar 2010
Location: Ukraine
Operating system name and version: altlinux 2.4
Version of smsd: 3-3.1.7beta3
Smsd installed from: sources
Name and model of a modem / phone: sim300,sim300
Interface: serial,serial

program does not check the answer modem (CME ERROR: 3 (operation not allowed)) and creates the effect of file bomb.
In the folder "phonecalls" created a lot of data because of the modem is not removed anything.
Perhaps command is not supported by your modem (sim300 Revision: 1008B12SIM300D32_SST34HF3284)

Last week I have accumulated a lot of files (10 pieces per cycle testing)
~ 8000 units on day





Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
As you are running 3.1.7beta3, smsd will detect the error and stop trying after 3 errors. In the log you should have a message "Ignoring phonecalls, too many errors". Smsd does not try more while still running, but when you restart smsd, the counting and trying starts again.

In the configuration there is a phonecalls_purge setting which can be used when AT+CPBW command is not working. There is a default value for Siemens modems, but with other modems manual of a device should be consulted. It is also possible that storage of missed calls ("MC") cannot be purged, and in this case phonecalls feature cannot be used.

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
You could also check what "test command" says about this issue:

Ensure that there are missed calls in the memory of a device.

Stop the smsd if it's running.
Start it in communication mode: smsd -C GSM1
Follow the instructions on screen.

Type ATE1 (and Enter) to set echo on.

Type AT+CPBS="MC" to select storage of missed calls.

Type AT+CPBR=? to see the limits.

Type AT+CPBW=? to see the location range supported by the storage.

Show the results here.

Member
Registered:
Mar 2010
Location: Ukraine
Topic owner
keke wrote
Show the results here.

ATI
SIMCOM_Ltd
SIMCOM_SIM300D
Revision:1008B14SIM300D32_SST34HF3284

ate1
OK
at+CPBS="MC"
OK
AT+CPBR=?
+CPBR: (1-10),40,14

OK
AT+CPBW=?
+CPBW: (0)

OK

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
Ok, the final test:

Again, ensure that there are missed calls in the memory of a device.

Try:

AT+CPBS="MC"

AT+CPBR=1,10

AT+CPBW=0

AT+CPBR=1,10


If missed calls are cleared with AT+CPBW=0, you can use it as a phonecalls_purge.

If it did not work, your device is incompatible and phonecalls feature cannot be used.

Member
Registered:
Mar 2010
Location: Ukraine
Topic owner
sim300 not missed calls are cleared.
;(

  This topic is locked

Page:  1

SMSTools3 Community » Help and support Top

 
Time in this board is UTC.  

Privacy Policy   SMS Server Tools 3 Copyright © Keijo Kasvi.